WELCOME MAINTENANCE TO OFFICERS QTRS AT AF STATION HAKIMPET UNDER GE (AF) HAKIMPET

Amount

NOTES:- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. 5. Contractor should maintain separate registers for plumbing and carpenter repair works. Day to day complains should be noted in those registers with SI nos of complaints, location, qty of work, status of complaints and signature of incharge and stamp of the office. Format will be given from AGE B/R Office. Contractor should obtain the signature of incharge on the same day of work. These registers to be submitted to JE (Civ) on every weekend without fail. 6. List of complaints will be given to contractor on the first week of every month. Contractor should ensure all the works will be completed within that month itself. 7. Contractor should ensure that plumbing complaints resulting in wastage of water should be attended and rectified within 24 hours. Otherwise, a recovery of 25% of corresponding item will be made from contractor. 8. Contractor will make his own arrangement to store his items. 9. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 10. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 11. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply one coat distemper oil emulsion on walls including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

All as per item No 1 mentioned here-in-above but two coats of distemper oil emulsion.

All as per item No 1 mentioned here-in-above but on exposed surfaces of ceilings and all as directed.

M & L one coat of white wash on ceiling surface including preparation of old surface complete all as directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint including removing of nails,making good holes,cracks,washing floors, cleaning fittings in door and window,glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge. complete all as directed.

M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including washing floors, cleaning fittings in door,glass,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

S&F in Repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm fixed with stainless steel wire staples as directed by the Engineer-in-Charge.

Complete removal of existing treatment including prepeartion of wall surfaces all as specified .

M&L for 2 mm thick (average) wall care putty including rubbing with sand paper and making the wall surface smooth to the satisfaction of Engineer-in-Charge to receive distempering complete all as specified and directed.

M&L for two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed.

M & L for 10 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface smooth and even without using extra cement complete all as specified and directed.

M & L for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface over and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and three coats white wash complete all as specified & directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of priming complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick complete all as specified and directed.

M&L figured glass pin headed ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane 3 mm thick complete all as specified and directed.

S&F in repair 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy with brackets and all other connected works complete all as specified and directed.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup borad & kitchen cabinet shutters including lipping with teek wood and all other similar works as in repair complete all as specified and directed.

S&F continuous (piano) hinges,40mm width flaps,mild steel,bright finish or electrogalvanised complete all as specified.

S&F brass magnetic catcher for cupboard complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair brass magnetic catcher for cupboard complete all as specified and as directed by the Engineer-in-Charge.

S&F 40mm dia cupboard knobs brass polished fixed with screws and washer of mild steel,bright finished comlete all as specified and directed.

S&F in repair 40mm dia cupboard knobs brass polished fixed with screws and washer of mild steel,bright finished comlete all as specified and directed.

S&F in repair 150mm long Aluminium anodised hasp and staple,safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair150mm long floor door stopper of aluminium alloy body and tongue,anodised with hard drwn steel spring fixed in floor complete all as specified.

S&F in repair 100 mm butt hinges medium weight cold rolled stainless steel.

S&F in repair 75 mm butt hinges medium weight cold rolled stainless steel.

S&F in repair aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair aluminium anodised 75 mm barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair extruded aluminium alloy handle,fabricated type 150 mm cast type anodised

S&F in repair extruded aluminium alloy handle,fabricated type 75 mm cast type anodised

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Taking down and Resecuring or easing & adjusting, shutters of any description at any position exc 1.00 sqm but not exc 2.00 sqm apply appropriate primer and painting where necessary complete all as specified and directed.

M&L welding in repairs n. exc 5 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as specified and as directed by the Engineer-in-Charge.

GUTHIKONDA BROTHERS (BID ID -3162090)

Saiansh Associates (BID ID -3159610)

SAI RAM CONSTRUCTIONS (BID ID -3155015)