Face lifting Revamping of Terminal Building at Panthachowk by way of painting cleaning of floors PVC partition walls providing decorative ceiling replacement of damaged CGI sheets and damaged windows

Amount

Finishing walls with Acrylic exterior paint of required shade, old work (two or more coats applied @ 1.67 liters/10Sqm on existing cement paint surface).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Dismentalling wooden boardings in lining of walls and partition excluding supporting members but incluing stacking within 50meters lead thickness above 10mm upto 25mm.

Providing and fixing of 12mm ply wood on existing frame work for ceilings of rooms including nails etc all complete job.

Providing and fixing of 20mm thick wooden planks ceiling (frame work for base to be paid fo seperatelty) with M.S screws budloo wood.

Refixing of 20mmm thick wooden planks ceiling with M.S screws Budloo wood complete job.

Provding and fixing ready made well finished T&G type wooden panelling with skirtting chair rails and cornices with necessary screws including polishing complete job.

Provding wood work in frames of false ceiling, partitions etc sawn and fixed in position (Budloo/Fir wood).

Varnishing with varnish of approved brand and manufacture (one or more coats with copal varnish)

Distempering with 1st quality Acrylic/ oil bound washabe distemper (ready made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers, specifications, one or more coats on old work.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing wth butt hinges of required size with necessary scews, excluding panelling, which will be paid for seperately, all complete as per direction of Engineer-in-charge (Note Burr hinges and necessary screws shall be pair seperately) Second class kail wood. 30mm thick

Providing and fixing panelling or panelling and glazed shutters for doors, windows and cerestory (Area of opening forpanel inserts excluding portion inside grooves or rebates to be measuresd).Panelling for panelled or panelled and glazed shutters 25mm to 40m thick commercial ply on both sides 10mm.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S pressed butt hinges bright finihed of required size with necessary screws Second class kail wood 30mm thick.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufature on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats on new work.

Providing / fixing various standard quality CP fittings of approved quality and make complete job. C.P bib cock

C.P Angle valve

PVC connection 18"-24" size.

Health faucet

C.P gratings

Basin mixer

Providing and fixing PVC waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32mm dia.

Providing and fixing of P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS :7231,with all fittings and fixutures complete 10 liters capacity white.

Providing and fixing of wash basin with C.I brackets, 15mm dia CP brass single hole basin mixer of approved quality and make including painting of fittings and brackets cutting and making good the walls wherever required (a). White citerious china wash basin size 550x400mm with a 15mm CP brass single hole masin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing 1st quality ceramiic glazed wall tiles conforming to IS:15622 ( thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy bottle green, black of any size as appred by the Engineer-in-charge, in skirting, risers of steps and dedo over 12mm thick bed of cement mortar 1:3 (1cement:3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete.

Repairs to plasters of thickness 12mm to 20mm in patches of area 2.5Sqm and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 ( 1 cement: 4 find sand).

Renewing bottom rail and/ or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer.

Kota stone slab 20mm thick in risers of steps, skirting, dedo and pillars laid on 12mm (average) thick cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and curing complete.

Surface dressing of the ground incuding removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbsih, lead upto 50m and lift upto 1.5m in all kinds of soil.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Cleaning of PVC walls, tile/marble floors, kota stone by removing dirt, dust grease and bird droppings etc using suitable chemical eash compleete job.

Dismentalling roofing ridges, hips valley and gutters etc and stacking the material including carriage of stacked material upto official store G.S sheet.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by the Engineer-in-charge) 0.50mm (+ - 0.05%) total coated thickness with zonc coating 120grams per Sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meters or as directed by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal /vertical or curved surfaces, excluding the cost of purlins, rafters and truusses and including cutting to size and shape wherever required.

Providing and fixing bright finished brass hard drawn hooks and eyes 150mm.

Providing and fixing fly proof wire guaze to windows, clerestory windows and doors with M.S flat 15x3mm and nuts and bolts complete Galvanized M.S wire guaze with 0.63mm dia wire and 1.4mm operture on both sides including scaffolding all complete.

Providing and fixing bright finished brass handles with screws etc complete. 100mm

Providing and fixing specified board medium density exterior grade (Grade-I) to frame, backing or studding with screws etc complete (Frames, backing or studding to be paid seperately) prelaminated with decorative lamination on both sides MDF board.. 12mm confirming to IS:14587.

Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50mm thick, wrapped in 200G Virgin polethene bags placed over existing false ceiling and held in position by crisscrossing G.I wire with resin bonded fiber glass wool with density 16kg/Cum

Brick work with common brunt clay (non-modular) bricks of class desognation 7.5 in foundation and plinth including curing in i:6 mix (1 cement: 6 coarse and).

Providing and fixing 8mm AC4 laminated wooden flooring premium quaity tongued and grooved in flooring including fixing alongwith all accessories as per the directions of Engineer-in-charge complete job.

Providing and placing on terrace (under ground) polythylene water storage tank ISI:12701 marked with cover and suitable locking arrangemet and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing wooden benches of size area1800x610mm length=1800mm, Height=710mm (Approximately) in kail wood including finishing, polishing, as per the directions of Engineer in-charge-All complete job

ELECTRIC ITEMS Wiring for light point/ fan point/exhaust fan point/ call bell point 1.5Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable sixe bod ans earthening the point witj 1.5Sqmm FRLS PVC insulated copper conductor single core cable etc as required. .

Wiring for light/power plug with 2x4Sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1.No 4Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/power plug with 2x2.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1.No 2.5Sqmm FRLS PVC insulated copper conductor single core cable of rloopearthing as required.

Supply and fixing box type 3/6 pin 15/16A switch socket combined.

Supply and installation of PVC gang box as below 2 way

Supply and installation of PVC gang box as below 4 way

Supply and fixing following piano type switch/ socket on the existing box/cover including connections etc as required. 5/6 amps switch.

3 pin 5/6 socket outlet.

Supplying and fixing 5A to 32A rating, 240/415V. 10KA. "C" curve miniature circuit breaker suitable for inductive load following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Single pole.

Supply and fixing following rating, double pole 240V isolator in the existing MCB DB complete with connetions testing and commissioning etc as required. 40A

Supply and fixing of following sizes of medium class PVC conduit alonwith accessories in surface/ recess including cutting the walls and making good the same in case of recessed conduit as required. A). 20mm.

Supply and installation of 400mm wall mount fans as per requirement.

Supply, installation of 250mm sweep exhaust fans with gravity lovers of reputed make.

Supply and fixing following way, horizontal type 3 pole and neutral, sheet steel, MCB distribution Board, 415V, on surface / recess complete with tinned copper bus bar. Neural bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as reuired (but without MCB/RCCB/Isolator). 4.way (4+12), doubel door.

Supply and fixing following rating, four pole, 415V, isolated in the existing MCB DM complete with connections, testing and commissioning etc as required. 100A.

M/S sheikh constructions (BID ID -2300739)

TOUSEEF MOHAMMAD MALLA (BID ID -2300759)

BHAT CONSTRUCTION (BID ID -2296434)

M/S MOHD YOUSUF MIR (BID ID -2295727)

Shabir Ahmad Wani (BID ID -2300443)