Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.0 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹52.8 L+₹4.2 L (8.63%)Rejected-Finance | L2 | Rejected-Finance other than L1 | |
| 3 | L3₹54.6 L+₹6.0 L (12.4%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance other than L1 | |
| 4 | L5₹55.5 L+₹7.0 L (14.4%)Rejected-Finance | L5 | Rejected-Finance other than L1 | |
| 5 | L5₹57.3 L+₹8.7 L (17.9%)Rejected-Finance 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance other than L1 |
Tender Value
Refer Docs
EMD Value
₹94,000
Closing Date
12 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN - 151201
REPAIR/ REPLACEMENT/ MAINT OF LT DISTRIBUTION SYSTEM AND COMPREHENSIVE MAINT OF E/M FITTINGS AND FIXTURES OF CERTAIN BUILDINGS IN TECHNICAL AREA AT AF STN BHISIANA
2024_MES_665566_1
GE/BHI/T-69/2024-25
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE (AF) BHISIANA
₹94,000
Yes
7 Nov 2024
12 Jul 2024
14 Sept 2024
12 Jul 2024
12 Sept 2024
27 Jul 2024
12 Jul 2024 - 20 Jul 2024
Amount
Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil, complete all as specified and directed by Engineer in Charge.
Returning, filling including spreading, leveling watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed by Engineer in Charge.
Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point, omplete all as specified and directed by Engineer in Charge.
M&L for Fazilka river sand as in sand cushioning to under ground cable including punning down of thickness 180mm sand in layers, complete all as specified and directed by Engineer in Charge.
M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm, complete all as specified and directed by Engineer in Charge.
M&L for making bore below the road for crossing the GI pipe light grade 50 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed by Engr-in-charge.
M&L for making bore below the road for crossing the GI pipe light grade 80 mm dia for cable protection and fill the putty on both sides of the GI pipe after crossing the armoured cable to avoid the water inside complete all as specified and directed by Engr-in-charge.
M&L for GI pipe 80 mm dia. , 'light grade', galvanised, with all fitting; laid in trenches complete all as specified and directed by Engineer in Charge.
M&L for GI pipe 50 mm dia. , 'light grade', galvanised, with all fitting; laid in trenches complete all as specified and directed by Engineer in Charge.
M&L for taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifing the fault and making cable in serviceable condition of 1100 V grade UG cable of size from 185 to 240 sq mm, 3½ core including relaying of bricks and sand complete all as specified and directed by Engineer in Charge. ( NOTE : Striaght through joints measure and paid seaprately ) NOTE (a) Striaght through joints measure and paid seaprately (b) Excavation, Returning, filling, removal, will be measured and paid separately.
M&L for taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifing the fault and making cable in serviceable condition of 1100 V grade UG cable of size from 70 to120 sq mm, 3½ core including relaying of bricks and sand complete all as specified. NOTE (a) Striaght through joints measure and paid seperately. (b) Excavation, Returning, filling, removal, will be measured and paid separately.
M&L for taking down unserviceable LT UG cable any type from trenches and removing the fault and relaying of LT UG cable after rectifing the fault and making cable in serviceable condition of 1100 V grade UG cable of size from10 to 50 sq mm, 2 to 4 core including relaying of bricks and sand complete all as specified NOTE (a) Striaght through joints measure and paid seperately. (b) Excavation, Returning, filling, removal, will be measured and paid separately.
Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/PVC of size from 185 to 240 sq mm, 3½ core, complete all as specified and directed by Engineer in Charge.
Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/PVC of size from 70 to 150 sq mm, 3½ core, complete all as specified and directed by Engineer in Charge.
Taking down LT cable 1100 Volts grade heavy duty UG cable XLPE/PVC of size from 10 to 50 sq mm, 2 to 4 core, complete all as specified and directed by Engineer in Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 240 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 185 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 120 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 95 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 70 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 50 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 35 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 Sq mm 3.5 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
M&L for checking of earth resistance on monthly basis for each earthing with the help of earth resistance tester, taking earthing result along with the user representative and proper record shall be made by the concerned JE E/M and one skilled tradesmen and one helper deputed by the contractor alongwith travelling convenyance for the tradesmen, including minor repairs (no new items) deemed inclusive in the quoted rates at both technical and domestic area at Bhisiana AF Station and checking and balancing of electrical loads of Bldgs in Technical area of all DBs and LT Panesl by diconnecting the incoming and outgoing cables and connections of these cables with the help of thimble as per site requirement, dressing of wires inside of DBs with the help of cable tie including closing of LT Panels and DBs doors with the help of nuts and bolts including welding drilling etc deemed inclusive in the quoated rates complete all as specided and directed by Engr-in-Charge. Note: Penalty shall be imposed for each job @ Rs 50/- for delyaing the checking of earthing within the one day for one earth complete all as directed by the Engr-in-Charge.
Supply and fix in replacement of MCCB 630 Amps,4 Pole 36/37 KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply , laying , jointing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 Sq mm 4 Core with aluminum thimble of same size complete all as specified and directed by Engineer in Charge.
M&L for cable jointing kit for 1100 volts grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 35 to 95 sqmm, complete all as specified and directed by Engineer in Charge.
All As per Item No. 27 above but for cable of size 120 to 150 sqmm, complete all as specified and directed by Engineer in Charge.
All As per Item No. 27 above but for cable of size 185 to 240sqmm, complete all as specified and directed by Engineer in Charge.
M&L for PCC (1:3:6) type C-1 with 20 mm gradded stone aggregate for copping of poles Pedestal (PCC) or any site requirement including dismantling, complete all as specified and directed by Engr in Charge
Supply and fix of MCCB 63 Amps,4 Pole 16/25 KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fix of MCCB 100 Amps,4 Pole 25 KA with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fix of MCCB 125 Amps,4 Pole 16 Ka with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fix of MCCB 160 Amps,4 Pole 16 Ka with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fix of MCCB 200 Amps,4 Pole 25/26KA Ka with thermal magnetic settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fix of MCCB 250 Amps,4 Pole 25/26 KAwith thermal magnetisettings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fix of MCCB 315 Amps,4 Pole 25/35KA with thermal magneti settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fix of MCCB 400 Amps,4 Pole 36/37 KA with thermal magneti settings by disamantling old one from panel/feeder pillar box all as directed by Engr-in-Charge.
Supply and fixing in replacement of Aluminium Thimble of size :-
Material and labour for preparation of old steel surfaces including welding work of door,hinges with locking arrangement and applying one coat of synthetic enamel ivory paint/(Smoke grey) to steel LT Panel/bus bar box and junction boxes surface after disconnecting the electrical connections and reconnecting LT cables after painting, complete as specified and directed by Engr-in-Charge.
Supply & fixing in replacement of sheet metal(MS) bus bar box single door,outdoor type weather proof, size 300x300x200mm mounted on ground with iron angles(25x25x4mm). Having alluminium bus bar 4 nos, rated 100amp all as specified & directed by Eng-in-charge.
M&L for servicing of LT panel of any size. Including disconnecting of supply, removing brunt out wires,cable joints, thimbles, MCCB and bus bar Including supply of copper wires, thimbles, rejointing of any size cable with bus bar and mccb properly.cables of damaged PVC insulation will rejoint after removing damaged piece of cable and making new joint, complete all as specified and directed by Engineer in Charge.
Supply and fixing in repair MCB DB TPN 4 Way vertical tupe factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including one MCCB upto 125A (ii) MCCB 3 pole 63 Amps, 415 Volts with breaking capacity 25 KA.-03 No.
Supply and fixing in repair on load changeover switch 400 amp 4 pole,415 V,50 Hz in sheet steel enclosure for surface mounting with padlocking facility with the connecting accessories complete all as specified and directed by Engineer in Charge.
Supply and fix in repair on load changeover switch 250 amp 4 pole,415 V,50 Hz in sheet steel enclosure for surface mounting with padlocking facility with the connecting accessories complete all as specified and directed by Engineer in Charge.
Supply and fix 800 Amp ACB 4 pole 50KA with Microprocessor Release of manual drawnout type in existing panels with all LT connections by dismantling the old one complete all as specified and directed by Engineer in Charge.
M&L danger notice board/plate of 1.6mm thick mild steel sheet vitreous enameled white with letter, figures and conventional skull and bones in signal red colour and fixed with MS clamps, nuts and bolts of approved size of HT 25 x 20 cm size, complete all as specified and directed by Engineer in Charge.
M &L for Dismantling/disconnection of LT connections from ACB by taking down proper shutdown,opening the ACB (Panel) installed at various locations for servicing ,overhauling all moving contacts,fixed contacts,tripping coil including testing the insulation value of moving and fixed contacts and cleaning the carbon from contact point with petrol etc and greasing oiling the all moving parts including testing all meters/relay such as under voltage relay and servicing,shut trip coil etc including reassembling the ACB including testing after completion of work complete all as specified and directed by Engineer in Charge. Note : Complete servicing and maintenance will be carried out at site only
M& L for Dismantling of old unsv PCC poles of any size /type carefully and removing from site in parts or whole complete all as specified and directed by Engineer in Charge. Note :- All T&P items deemed necessary to carry out dismantling and removing the old PCC pole are included in the overall cost quoted
Supply and fix bracket for street light fitting made out of 40 mm dia GI pipe light grade 1.2 mtr long each bent to required shape & size as directed by EIC & fixed to pole with and including flat iron clamps 02 Nos made out of 32 x 6 mm flat iron including GI nuts, bolts & washer and painting of clamps andstreet light firtting bracket with one coat of red oxide primer, one under coat and one finishiung coat with alumminium paint complete all as specified and directed by Engineer in Charge.
Supply & labour all steel tubular swaged poles type 410-SP-31 (09 mtr long) with mild steel base plate of size 30cmx30cmx6mm thick, welded at bottom and cap finial taper plugs, bolt, nuts and screw as specified and fixed in true vertical position complete.Make of Pole : Riddhi siddhi poles/ Equivalent as approved by GE. Note :- (a) Excavation earth work, foundation concrete shall be measured and paid separately under respective items. (b) Poles shall be painted with two coats of black bituminous paint throughout internally and externally up to planting depth. The remaining portion of the exterior surface shall be painted with two coats of aluminium paint over a coat of red oxide primer (c) Test certificate and purchase vouchers will be submiited .
M & L for earthing with steel earth plate electrode of size 60cm x 60 cm x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less tha 1.5 mtr deep below normal grund level connected to galvanized iron strip size 32 x 6 mm as earthing lead by means of nuts, bolts and washers of steel after wlding of GIstrip to earth electrode to the full length of earht plate, 40mm dia GI tubing lightgrade protection pipe upto test point, 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover ofsize 30x30 cm made of RCC 1:3: with suitable handle, angle iron frame made of angle iron of size 40x40x4m, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetables soil to the remaining 10% removal of surplus soil and retruning filling in all as required at site including test point made outof steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I and directed by Engr-In-Charge.
M&L earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected to and including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed.
Supply and fix only ISI marked self adhesive PVC electrical insulation Tape roll of 25 mm wide, 0.125 mm thick and 25 RM length complete all as specified and directed by Engineer in Charge.
M&L for providing wall mounted LED Display board of size 1m x 1m x1 inch madeup with acrylic sheet with aluminium frame all around the acrylic sheet and back with provision of LED display with all connections,wires etc consisting of description and images as finalized by the Engineer-in-Charge in capital letter at the top complete with fixing arrangements to the wall all as specified and directed by Engineer-in-Charge.
MAINT OF E/M FITTINGS AND FIXTURES
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engineer in Charge.
M&L for concealed point wiring using approved colour codeing as per IS with halogen free flame retardent (HFFR) smoke free non toxic,non corrosive with copper cable 1.5 sqmm confirming to IS : 694 nominal area single core insulated and unsheathed stranded cable 1100 volt grade and including 20 mm dia. ERW stove enameled concealed conduit heavy duty ISI marked and unsheated copper conductor 1.5 sqmm area as earth wire as earth continuity conductor complete all as specified and directed by Engr-in Charge
M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through ERW steel conduit ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site.Note : Two runs of 4 sqmm cable for phase and neutral alongwith one run of 4 Sqmm as earthing wire PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length, complete all as specified and directed by Engr-in Charge
Supply and fix 25 mm stove enamelled Rigid steel conduit, welded at joints suitable to be used as conduit for drawing copper wire all as specified and directed by Engineer-in-Charge
Supply, laying and drawn out in steel conduit 2.5 sqmm single core copper wire HFFR insulated industrial cable conforming to IS 17048 complete all as specified and directed by Engineer-in-charge. Note :- Steel conduit shall be measured and paid seperately in respective item.
S & F flame proof switch socket and plug combined in LM^ cable termination box in LM6 , 16A, 250V, 2 P+Earth complete all as specified and directed by Engr-in Charge
Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engr-in Charge
Supply and fix ceiling rose 240V, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed by Engineer-in-charge.
S& F 90 W LED FLAMEPROOF FLOOD LIGHT. 440VAC PROTECTION.10KVA SURGE PROTECTION DEVICES INBUILT, IP67 Rating (Waterproof), CRI : >80%, Premium quality, LED : 130-140lm/w, CCT - 6000-6500K (Cool White)ENERGY SAVING - This LED light offer high effective lighting with low consumption, save up 60% of energy compared with traditional lighting fixturePREMIUM DESIGN - The light quality combined with an incredible durable fixture makes this product perfect for industrial application. Our 50W flameproof light has an IP67 rating which protects against strong rainfall without causing damaging or corrosion to the fixture.Built to last: Excellent heat management with High quality aluminum Heat Sink and special large shape ensure long life. Low brightness decay, that means the output can remain 5 times longer than traditional MH or HID bulb.PROTECTION AVAILABLE: SHORT CIRCUIT, OPEN CIRCUIT, UNDER VOLTAGE, OVER VOLTAGE, ISOLATION, 10KV - INTERNAL SURGE PROTECTION, BIS APPROVED DRIVER complete all as specified and directed by Engr-in Charge
Supply and fix flame proof exhaust fans of size 380 mm single phase AC supply complete and fixing arrangement etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper cable FRLS of suitable size incl making hole for fixing of exhaust fan of suitable size and making good disturbed surfaces complete all as specified and directed by Engr-in Charge
Supply and fix flame proof Wall mounting fans of size 400 mm single phase AC supply complete and fixing arrangement etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper cable FRLS of suitable size incl making hole for fixing of exhaust fan of suitable size and making good disturbed surfaces complete all as specified and directed by Engr-in Charge
Supply and fix including taking down outdoor decorative LED Post top lantern with LED bulb 7/9/10 watt with spun aluminium die cast Housing cum heat sink PMMA diffuser in IP65 complete all as specified and directed by Engr-in Charge
Supply and fix single phase 220/240 Volt Flameproof Distribution Board 4 way with suitable aluminium bus bar complete with all acessories all as specified and as directed by Engineer -in-Charge.
Supply and fixing LED light fitting 2x 16 watt flame proof ,CMRI certified for gas /vapor group of IIa & IIIB , Zone 1 & 2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver , holders, connectors etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.
Supply and fix 40 Watt white aluminium diecast flameproof bulk head light fitting 230 Volt IP 65 50 Hz Powder coating all as specified and as directed by Engineer in Charge
M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw including necessary cutting and welding work complete all as specified and directed by Engr-in Charge
Dismantling of old air termination rod of any type complete with accessories complete all as specified and directed by Engr-in Charge
Refixing of air termination rod obtained from dismantling after stretching, cleaning all as specified and directed by Engr-in-Charge
S & F air termination copper rod 12 mm dia 300 mm long in replacement complete all as specified and directed by Engr-in-charge
S & F air termination single pointed aluminium rod 12 mm dia 300 mm long in replacement complete all as specified and directed by Engr-in-charge
M&L for Relaying of GI strips obtained from taking down complete after stretching , bent to straight including providing porcelin cleat, brazing , nuts bolts where as required all as specified and directed by Engr-in-charge
M&L for Relaying of copper strips obtained from taking down complete after stretching , bent to straight including providing porcelin cleat, brazing , nuts bolts where as required all as specified and directed by Engr-in-charge
S&F epoxy based insulator of different shape size suitable for fixing GI/ Copper strip complete all as specified and directed by Engr-in Charge
Taking down carefully copper / Aluminium strip including (porcelin cleat, PCC slabs, nuts and bolts complete etc) removing materials from site and making good disturbed surfaces of ground, walls, roofs etc complete all as specified and directed by Engr-in Charge
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 20x3 mm copper strip all as specified and directed by Engr-in-Charge.Note Porcelin cleat and PCC slab deemed tobe included in quoted rate
All as per item No 83 above but for GI strip of size 25x4 mm all specified and directed by Engr-in-Charge
All as per item No 83 above but for Al strip of size 25x3 mm all specified and directed by Engr-in-Charge
All as per item No 83 above but for copper strip of size 32x6 mm all specified and directed by Engr-in-Charge
M&L for earth pit cover bucket type Red or Green all as specified and directed by Engineer-in-charge
M& L for precast earthing RCC pit with cover plate of standard size duly painted in Red or Green all as specified and directed by Engineer-in-charge
M&L for CI plate triangular plate with 500 mm long spike for writing earthing name and value all as specified and directed by Engineer-in-charge
M&L for Providing,PCC 1:3:6 type C-1 using 20 mm graded stone aggreat,for damaged earth pit chamber with fair finish internal surface of concrete chamber of earth complete all as specified and directed by Engineer-in-charge.
M&L for Earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick buried directly in ground(earth) pit not less than 2.25 meter deep below normal ground level) with top edge of earth plate not less than 1.5mtr below normal ground level connected to galvanized earth strip of size 25 mm x 4 mm by means of bolts, nuts check nuts and washers of galvanized iron or steel all as shown in electrical palte No 3 of SSR Pt-I connected earthing test point/panel all as specified including PCC earth chamber using PCC(1:3:6) Type C-2 using, graded stone aggregate,50mm thick cast iron frame with CI cover, funne and wire in esh excavation and earth work complete all as specified and directed by Engr-in-Charge. Note: Pipe/strip upto 7.5 mtrs also included in quoted rate
M&L for Earthing complete with copper plate 60×60cm ×3.15mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 20×3 mm copper strip by means of bolts, nuts check nuts and washers of galvanized iron or steel all as shown in electrical palte No 5 of SSR Pt-I connected earthing test point/panel all as specified including PCC earth chamber using PCC(1:3:6) Type C-2 using, graded stone aggregate,50mm thick cast iron frame with CI cover, funne and wire in esh excavation and earth work complete all as specified and directed by Engr-in-Charge.Note: Pipe/strip upto 7.5 mtrs also included in quoted rate
REYANSH GARG AND COMPANY (BID ID -3093384)
M/s Luxmi Constructions (BID ID -3092468)
Rasvinderpalandco (BID ID -3093197)
M/s Kamal Builders (BID ID -3092399)
M/s Azure Infrastructure Construction Co. (BID ID -3092707)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .