ADDN ALTN TO 1ST FLOOR OF O 19 BLDG UNDER AGE BR II AND SPECIAL REPAIRS TO WATERPROOFING TREATMENT TOILET BLOCKS AND EXTERNAL PLASTER OF BLDG NO O 18 AT NEW NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

M&L Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L 50 mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in sub base complete all as specified and directed

M&L full body vitrified tiles/slabs 14mm to 16mm thick 80 x 240 cm in flooring and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. Make : M/s Kajaria, M/s Somany, M/s Johnson Tiles, M/s Orient Bell

M&L Screed bed or bedding layer of mortar 20mm thick for laying floor finished in CM (1:4) complete all as specified.

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls, etc including racking out joints hacking for key scrubbing down with water etc.

M&L 15 mm thick cement plaster on other than fair face of brick or concrete wall surface finished surface even and fair in CM 1:4 all as specified and directed

M & L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.

Prepration of new plastered surfaces of walls, pillars, cornices, priming plastered and other surfaces and applying two coats of distemper oil emulsion, white or tinted over a coat of 1mm thick wall care putty on walls all as specified

Prepration of new plastered surfaces of ceiling and applying two coats oil bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.

Complete removal of existing treatment, preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces and applying two coats of distemper oil emulsion, white or tinted on walls over a coat of 1mm thick wall care putty all as specified.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each .

All as per Item No 14 above but exc 1.5 sqm but n exc 4 sqm each.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

S&F 100 mm extruded aluminium handles, fabricated type anodised

S&F 100mm aluminium anodised barrel tower bolts of extruded section

S&F 75mm stailess steel medium weight butt hinges all as specified and directed.

S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts

S&F 150 mm Brass handles, cast type, polished brightd

S&F 150mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts

S&F 100mm size cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 all as specified and directed..

S&F floor door stpper 150 mm size of brass body and tongue with hard drawn steel spring

S&F in repair vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs.

S&F in repairs vitreous china wash basin white flat back 550 x 400mm , with fitting of PTMT waste coupling suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc complete all as specified and directed .

S & F in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F in repair Stop valves, cast copper alloy high pressure 15mm bore ISI marked with cruch or butterfly handles screwed down both side for iron pipes complete as specified and directed.

S&F in repair 10litre capacity PVC valveless, syphonic action type, flushing cristern, low level, white, with inlet, ball valve, float and handle including brackets all complete as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm in repairs

S&F in repair 32 mm dia PVC flexible pipe of suitable length for wash hand basin or urinal complete all as specified and directed

S&F in repair vitreous china bowl urinal Urinal Flat Back size 420 x 395 x 635 mm (Make - Cera Model-CARMINA New cat no: S4020102 Old cat no: 5001) with CP urinal Spreader and waste pipe complete all as specified and directed

S&F in repair vitreous china urinal partition half stall complete all as specified and directed

S&F in repairs Bib taps, 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs High density polyethylene pipes (HDPE) 40mm dia of pressure rating 6 kgf/cm2 fixed complete to wall, floors for drain out the waste water in Kitchen Sink/wash basin complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density for low level cistern.

Taking down & S&F GI Tubing medium grade 15mm bore with all fittings, laid in trenches, wall or roof complete all specified and directed.

S&F Stainless Steel curtain rod 25mm dia fixed to brackets complete all as specified and directed

S&F stainless steel fancy type domes and bracket fixed to both ends of 25mm dia curtain rod complete all as specified and directed

S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

M&L powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (80 x 66mm aperture) all complete.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed.

Chipping, removing carefully concrete work by low impact hammer, breakar without damaging the structure & cleaning of roof slabs, chajjas, etc. and disposal of debries out side the MoD Land etc. complete as directed Engr-in-charge.

M&L for clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material, dirt etc. Complete and applying two coats of alkaline rust converting primer FEOVERTASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hours between the coats and applying protective coating IPNET-RB complete all as specified and directed.

M & L Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB as per manufacturer instructions complete all as specified and directed.

M & L for carry out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100/protectsil CIT/ferogard 903 on concrete surface .(This inhibitor shall have migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete as directed by Engr-in-Charge.

M & L for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete all complete as directed by Engr-in-Charge.

M&L for building up the profile of structrual members by using latex B2 modified air cured mortar system (polymer modified mortar) (1:5:15=1 monobond-5 Cement-15 Sand) -in damaged areas in 30mm thickness including leveling profiling etc complete all as specified and directed.

M & L for providing and applying jacketing around columns, beams, slabs, chajjas etc with Micro concrete (molith-MC) M40 including all lifts, shuttering,drilling holes and fixing shear anchor as directed and specified complete .Note: Reinforcement shall be measured and paid separately (Rates including jacketing, formwork and micro concrete)

M&L for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete all as specified and directed

S&F including fabrication framed work in MS iron such as grills, gratings gate fencing , etc with end of bars shouldered and/ or riveted or bolted with nuts and bolts framework conforming to Fe.290. Gde-E-165 complete all as specified and directed.

M&L two coat synthetic enamel paint over a coat of red oxide primer on new steel surfaces including prepration of surface of any description over 10 cm width or girth not otherwise all as specified and directed

Removing excavated soil and demolised material exc 5 Km but n.exc 10 Km out side MoD land complete all as specified and directed

Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/ points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc.

Material and labour for point wiring complete with proper colour coding using, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor conforming to IS-694, part-II, ISI marked and including PVC casing and caping not less than 25 mm size, ISI mark with all accessories on wall/ceiling/floor/roof etc, including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following :- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm.

One light/Exhaust/Ceiling fan point controlled by one switch.

One 3 pin socket outlet, 5 Amps on the same board with other switches

One 3 pin socket outlet, 5 Amps, on the independent board

All as per item No 60.00 above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch.

M & L for replacement of wiring for circuit/submain wiring alongwith earth wire of sizes 2x6.0 sq. mm for phase and neutral and 1x4.0 sq. mm as earth wire 1100 volts grade cable, FRLS, passing through PVC conduit including accessories PVC insulated mulunsheathed single core multi stranded copper conductor complete after taking out old U/S one all as specified.

S & F modular switch piano, 1 module, single pole one way 6 Amp.

S & F modular socket 2/3 pin, 2 module, 6A, ISI marked, 230 volts.

S & F modular switch piano, 1 module, single pole one way 16Amp.

S & F modular socket 6/16A, 6 pin, 2 module, ISI marked, 230 Volts.

S & F in replacement with modular stepped type fan regulator, 2 module, single pole one way ISI marked.

Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S & F in replacement with modular PVC Gang box of 12 module, ISI marked for mounting of modular switches and sockets including blank plate for blank module. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

All as per Item No- 68.00 above but of modular PVC Gang box, 8 module.

All as per Item No- 68.00 above but of modular PVC Gang box, 6 module.

All as per Item No- 68.00 above but of modular PVC Gang box, 3 module.

All as per Item No- 68.00 above but of modular PVC Gang box, 1/2 module.

S&F modular white cover plate with frame, 12 module.

S&F modular white cover plate with frame, 8 module.

S&F modular white cover plate with frame, 6 module.

S&F modular white cover plate with frame, 3 module.

S&F modular white cover plate with frame, 1/2 module.

Taking down unserviceable FTL/batten fittings with supply and fix LED batten fitting 20 Watt, 240V, 4ft CDL/NW comprises of extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose. The contractor shall provide test certificate from authorized lab. Make of Light Fitting : Wipro/Crompton/Philips/Bajaj/Polycab

All as per item above but LED 10 watt , 2 feet .

Taking down old existing unserviceable recessed mounting/hanging light fittings and Supply and fix 1' x 4' LED luminaires CRCA housing, white powder coated, with polymer diffuser complete with all accessories suitable for recessed mounting 36 Watt, 240V, CDL/NW. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings or suspension wire of 1.5 mtr is included (02 nos) for hanging with ceiling surfaces by fastener bolt as per site requirement and as specified and directed by Engr-in-Charge.

S & F ceiling rose surface bakelite 65x50 mm with 3 terminals.

S & F sheet metal enclosures single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amp 240V.

Supply and fix ceiling fan 230V, 50 Hz, AC, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling with all allied accessories connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as sepecified. Note : Old unserviceable exhaust fan will be deposited in MES store.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, frame and louvers including connection as required at site with flexible copper cable all as per specified and directed. Note : Old unserviceable exhaust fan will be deposited in MES store.

M & L for snap-on trunking system with cover, angles, bends and all accessories and fitting of size 50x80mm fixing on wall Complete all as specified and directed . Make- Legrand Cat No-075601 or equivalent in Pressfit/Precision.

M&L for XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 35 sq mm 3.5 core laid on wall/floor or passing through cable trunking complete all as specified.

S & F MCB DB TPN 4 way with 200 amps rated busbar 415 V double door confirming to IP 43-IK complete with din rail, Neutral and Earthing bar complete all as specified.

S&F MCB DB SPN conforming to IP 43 - IK 09 with acrylic door, 8 way double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces by plastering or PCC work inclding distembering to the affetced to walls.

S & F miniature circuit breaker (MCB) TPN, 63 Amp, 415V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as specified.

S & F miniature circuit breaker (MCB) SPN 32 Amp, 240V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as specified.

S & F miniature circuit breaker (MCB) SP, 5 to 32 Amp, 240V, 10KA 'B' curve in the DB complete with connection testing and commissioning complete all as specified.

Cutting hole in existing concrete or brick wall suitable for fixing 230/300/450mm sweep exhaust fan making good the hole including proper internal plaster work and surface finish in side and outside the hole as per site requirement complete all as specified and directed by Engr-in-Charge

Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 20000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 200 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro

Supply & fixing LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 6000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 60 watt, with ingress protection IP 65/66 and SPD of capacity 5 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. Make:Bajaj/Havells/Crompton/Wipro

S&F street light bracket bend to shape made as required of 32 mm dia, length 1.5 mtr GI pipe light grade fixed to pole/ Wall including M&L for fixing with the help of flat iron clamp with the help of nuts and bolts for fixing of street light fitting on the wall complete all as specified and as directed.

M & L for wiring for circuit/submain wiring alongwith earth wire of sizes 2x1.5 sq. mm for phase and neutral and 1x1.5 sq. mm as earth wire 1100 volts grade cable, FRLS, passing through PVC conduit including accessories PVC insulated unsheathed single core multi stranded copper conductor complete all as specified.

M & L for replacement of existing old u/s submain wiring with 2x6.0 sq. mm for phase and neutral and 1x6.0 sq. mm as earth wire PVC insulated unsheathed single core multi stranded copper conductor 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and making good the disturbed wall surfaces to match with existing all as required at site or as directed by Engr in Charge.

SRI RAM CONSTRUCTION

M/s Qureshi Construction Co

BOB ENTERPRISES

SHRI SAI ENTERPRISES

Unitech Enterprises

I.J Enterprises

SHREE JAGDISH FURNITURE CO.