CERTAIN B/R WORK INCL PLUMBING, JOINERY WORK IN JCOS/OR MD ACCN OF SITE-II, SITE-III AND SF MD ACCN AT FATEHGARH CANTT

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed at site.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed at site.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed at site.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed at site.

M&L 50 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregates as in plinth protection finishing cement concrete even and fair without using extra cement making 10mm wide and 30mm deep joints at each corner and at every 3.00 mtr interval filling the same with mastic filling i.e one part of bitumen 85/25 and 3 part of sand complete all as specified and directed at site.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed at site.

M&L for coloured chequred cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floor with white cement and pigment over and including screed bed of 15mm thick in CM 1:6 complete all as specified and directed at site.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm screed bed in CM 1:6 complete all as specified and directed at site.

M&L glazed ceramic coloured tiles of size 300 x 450 x 7-8mm thick of floor tiles as in skirting / dado etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tiles over and including 10 mm screed in CM 1:4 complete all as specified and directed at iste.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) 15 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed at site.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed at site.

M&L 15mm thick cement plastering in CM 1:6 on brick or concrete surfaces and fair finished the surfaces without using extra cement all as specified and directed at site

Ditto All as per item No 12 above but in CM 1: 4 complete all as specified and directed at site.

M&L 5mm thick cement plastering in cm 1:3 on on ceiling and finished surfaces even and smooth without using extra cement complete all as specified and directed at site.

Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter from the frame ) complete all as specified and directed at site.

All as per item No.15 above but exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed at site.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed at site.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails, and guides) and hanging also fasterning and fixing complete all as specified and directed at site.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification as laid down in SSR part-I complete all as specified and directed at site.

M & L for PCC 1 : 3 : 6 type C1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed at site.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed at site.

S&F factory made 2nd class hard wood 35 mm thick factory made plain famed, paneled shutter (Two panels) with lock rail and panel of 12mm BWP commercial ply or 12mm veneered particle board with commercial veneering on bath pans. The size of rail and style as per IS –1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed at site.

S&F factory made 35mm thick Factory made glazed & skelton shutter of 2nd class H.W open rebated and prepare to receive the glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beeds for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed at site.

S&F in repair galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed at site.

S&F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed at site.

S&F aluminium anodized barel tower bolt of extruded section 150mm long complete all as specified and directed at site

S&F aluminium alloy handle cast type anodized of size 150mm long complete all as specified and directed at site.

S&F butt hinges med weight cold rolled mild steel 100mm size complete all as specified and directed at site.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed at site.

S & F 150 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed at site

S & F in repair curtain rod PVC coated anodised aluminium alloy rod 25 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed at site.

M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink wooden primer complete all as specified and directed at site.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed at site.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed at site.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed at site.

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed at site.

S & F 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed at site.

S&F in repair Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC `P’ or `S’ trap and jointed with solvant cement for 100mm pipe (excluding flush pipe and flushing cistern) and making good to floor. complete all as specified and directed at site.

S&F in repair for PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long complete all as specified and directed at site.

S&F in repair 15mm dia stop valve standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed at site

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed at site.

S&F for three layered rotional moulded polyethylene water storage tank vertical with closed top of 500ltrs capacity and fixed in position with and including 20 mm ball brass valve all as specified in SSR Part-I including disconnecting existing tanks and float vslve 20mm (PTMT) complete all as specified and directed at site.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, PTMT waste coupling 32mm dia and PVC waste pipe (excluding supply of pillar tap) complete all as specified and directed at site.

M & L three coat of white wash on new plastered wall or concrete surfaces including preparation of surface complete all as specified and directed at site.

M & L Two coats of Oil bound distemper on new plastered wall / concrete surfaces over a coat of white cement primer over 1mm thick cement based Birla / JK wall care putty including preparation of surface complete all as specified and directed at site.

M & L for two coats of Cement based paint over a coat of white cement primer on new plastered wall surfaces including preparation of surface complete all as specified and directed at site.

M & L three coat of white wash on new plastered Ceiling surfaces including preparation of surface complete all as specified and directed at site.

Dismentaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed at site.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed at site.

M&L Pre painted zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering , fixed with self taping screw all complete as specified and directed at site

M&L for pre-painted zinc coating GI based Plain steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed at site.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed at site.

S&F false ceiling with tiles 600 mm x 600 mm x 16 mm manufactured by M/s Armstrong World Industries using hot dipped GI steel section, exposed surface with pre-coated capping, main tee of size 24 mm x 32 mm x 0.27 at every 1.20 m center to center maximum and rotary stitched cross tee of 24 mm x 27 mm x 0.25 mm thickness at 1.20 m center to center and wall angle of size 19 x 19 x 0.35 mm thickness fixed to periphery of the wall. The above gird is suspended GI wire. The FINE FISSURED TEGUALR EDGE, ceiling tiles shall be manufactured by M/S Arm Strong World Industries of size 600 x 600 x 14 mm thick having NRC 0.55, light reflectance of more than 78% (WT), thermal conductivity K= 0.052 - 0.057 W/m0k, humidity resistance of 90% having fire performance class A, surface having factory applied vinyl latex paint with back side sanded and having one coat of white paint over the formed grid complete all as specified and directed. Make :- Everest / Armstrong / Rajshri

S&F in repair for factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed at site.

S&F in repair for factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified and directed.

S&F in repair for factory made steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed at site.

S & F framed work such as grills, gratings, etc with end of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed at site

M/S WASEEM KHAN CONTRACTOR

M/S SRI JAGDAMBE TRADERS

M/S S P CONSTRUCTION

M/S shree traders

M/S Arvind Electricals