Balance Work of Administrative Building for Krishi Vigyan Kendra Office at Golanthara, Berhampur

C.C Road:-Earthwork in excavation in foundation in all kinds of soil including hard moorum, stony earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from worksite with all leads and lifts including cost of all labour and T&P cess and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.(excluding GST)

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

Cement concrete of proportion (1:2:4) in F&F using 12mm size crusher broken chips of approved quality including cost, conveyance, royalty of all materials and labour with T&P etc. Complete.

R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge. Column base Footing

Grade beam

Column super structure

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge

Providing 12mm thick cement plaster (1:6) on the rough surface/ plumbed surface of masonry racking out of joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge

Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all materials & T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge

Painting two coats with synthetic enamel paint of approved quality and shade over a coat of primer on concrete surface of approved quality etc including cost of painting , all materials, T&P required for the work complete for the finished item of work as per technical specifications as per Section 800 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of Engineer-in-Charge.

Fixing of Vetrified Industrial tiles in floors, Trades of steps & Landing with with cement morter(1:4) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.

Construction of embankment with approved materials deposited at site from road-way cutting and other structures with all lifts and leads graded and compacted to meet requirement as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 305 of MoRT&H Specification for Road & Bridge works (5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

G.F:-Supplying, fitting, fixing of Polished Vitrified floor tiles of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm Coloured / Printed series (Homogeneous) laid on 20mm thick bed of cement mortar (1:4) and filling jointed with white cement of approved quality including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying, fitting, fixing of Polished Vitrified floor tiles of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm Coloured / Printed series (Homogeneous) in Dado on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigments to match the shades of tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying, fitting, fixing of Granite tile of size above 0.10 Sqm and upto 0.4 sqm (10mm thick) laid on 20 mm thick Cement mortar (1:4) in Dado with jointed with neat cement slury mixed with pigment to match the shades of tiles including rubbing and polishing etc complete including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Fixing of Chequred tiles in floors, Trades of steps & Landing with with cement morter(1:1) with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.

Finishing surface of walls with Cement based wall putty (Water based) of approved make and finshed smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials taxes, labour T&P etc. complete.

Providing & fixing Fibre reinforced Gypsum board celling suspanded from roof by adjustable G.I. celling angle with spread at a distance not more than 600mm fixed to roof by Row plug and stiff cleat, Gypsum bard 12.5mm thick held by G.G. perimeter chanel MF-3 & intermidiate chanel MF-7 framing, boarding, jointing & finishing with special type of gypsum compound etc including cost, conveyance & taxes of all materials, labour with T&P etc complete in all respect as per direction of the Engineer-in-charge.

Providing and fixing and fitting of Cornice of Gypsum board celling 4" wide of approved quality and approved make confirming to IS with necessary bends etc. complete fixed to wall with Screw etc as per the direction of Engineer in charge inclding cost of all material with taxes labour T&P etc. complete.

Wall painting two coat with WEATHER COAT of approved shade and approved make over a coat of primer to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Wall painting two coat with PLASTIC EMULSION PAINT over a coat of primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Painting two (2) coats with any approved Enamel paint over a coat of priming to new wood work and iron work including sand papering,polishing the surface smooth with cost,conveyance,taxes of all materials and labour with T&P required for the work etc.complete in all respects

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-Charge.

Supplying fitting of UPVC Sliding window of approved make with 6 mm thick glass of approved quality complete with frame,shutters and all fitting fixtures

Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.

F.F:-Supplying, fitting, fixing of Polished Vitrified floor tiles of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm Coloured / Printed series (Homogeneous) laid on 20mm thick bed of cement mortar (1:4) and filling jointed with white cement of approved quality including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying, fitting, fixing of Polished Vitrified floor tiles of premium grade having thickness 8 mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm Coloured / Printed series (Homogeneous) in Dado on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigments to match the shades of tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge

Supplying, fitting, fixing of Granite tile of size above 0.10 Sqm and upto 0.4 sqm (10mm thick) laid on 20 mm thick Cement mortar (1:4) in Dado with jointed with neat cement slury mixed with pigment to match the shades of tiles including rubbing and polishing etc complete including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Finishing surface of walls with Cement based wall putty (Water based) of approved make and finshed smooth and even surface to receive painting including cost of scafolding staging charges with cost of all materials taxes, labour T&P etc. complete.

Wall painting two coat with WEATHER COAT of approved shade and approved make over a coat of primer to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Wall painting two coat with PLASTIC EMULSION PAINT over a coat of primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Painting two (2) coats with any approved Enamel paint over a coat of priming to new wood work and iron work including sand papering,polishing the surface smooth with cost,conveyance,taxes of all materials and labour with T&P required for the work etc.complete in all respects

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer-in-Charge.

Supplying fitting of UPVC Sliding window of approved make with 6 mm thick glass of approved quality complete with frame,shutters and all fitting fixtures

Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.

HEAD ROOM:-Wall painting two coat with PLASTIC EMULSION PAINT over a coat of primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Wall painting two coat with WEATHER COAT of approved shade and approved make over a coat of primer to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST)

Painting two (2) coats with any approved Enamel paint over a coat of priming to new wood work and iron work including sand papering,polishing the surface smooth with cost,conveyance,taxes of all materials and labour with T&P required for the work etc.complete in all respects

E.I:-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Polycab/Finolex/L&T/Anchor/Havells/V-Guard) Group-A -L.P-30 F.P-25 C.B.P-

Group-B L.P- 41 F.P-25 C.B.P-

Group-C L.P- 26 F.P- 8 C.B.P-2

Supply and fixing of 6Amp socket with 6Amp switch on existing board (Modular type )

Supply and fixing of 16Amp plug with 16Amp switch on existing board (Modular type )

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp socket and 6Amp Modular switches (1x5A S-S)connection (make-Havells/ Anchor/ Legrand /Roma/panasonic)

Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch(3x5A+1x15A S-S) on Modular G.I. Box with Modular Base and cover(make-Havells/ Anchor/ Legrand /Roma/panasonic)

Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Polycab/Finolex/L&T/Anchor/Havells/V-Guard/) 2 X 1.5sq.mm +1 X 1.5sqmm

2 X 2.5sq.mm +1 X 1.5sqmm

2 X 4sq.mm +1 X 1.5sqmm.

2 X 6sq.mm +1 X 2.5sqmm.

2 X 10sq.mm + 1 X 4sqmm.

Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/ steel /pvc conduit as required. 2 X 1.5sqmm(Inverter)

Musical Call bell with battery

Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories

Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.

Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required

Supply and fixing of 5Amp to 32A rating 240V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required. (make-Hager/Havells/Legrand/Anchor/schnider single poles MCB LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 Single pole (SP)

Single pole and Neutral (SP&N)

Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.

Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.

Supply and fixing of porcelain base kitkat MS Frame Base/ Box 415V (Anchor/Havells) 100Amp kit kat

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For PDB/LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A FP RCCB (10KA),30mA Outgoings-32A SP MCB 10KA-12Nos.(Make-Havells/ Hager/ Schneider/Legrand/L&T)

Supply and fixing of different type of fitting with lamp :- 9Watt LED lamp , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k (Philips/ Havells/ AnchorBajaj)

Supply and fixing of 10 Watt LED BH Fitting ( Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years

Supply and fixing of 10 watt Mirrior light with all connections. , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k(Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

S/F of 20W 4' LED fitting Surface LED Light fitting , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k (Make-Havels/Panasonic/ Philips/Crompton)

S/F of 36W 2'X2' Surface/recessed on Ceiling LED fitting , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k (Make-Havels/Panasonic/ Philips)

S/F of 18W 1'X1' Surface/recessed on Ceiling LED fitting , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k(Make-Havels/Panasonic/ Philips)

S/F of 60W LED street light fitting , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k(Make-Havels/Panasonic/ Philips/Bajaj/Crompton)

S/F of G.I. Street light Bracket with M.S. Clamp

Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard) S/F of 1200mm Brush Less Direct Current BLDC Ceiling fan with Low wattage consumption fan , Heavy Duty,durable, copper winding,Aluminium blade(ISI mark) Crompton Grave/Khaitan/Havells/Orient/Polycab/V-Guard

Exhaust fan 300mm

Supply of PVC/XLPE Aluminium armored cables ISI marked. (Make- GLOSTER/Havells 95sqmm 3 1/2 core

Cable laying on wall surface with steel shaddle 25sqmm to 120sqmm

S/I/T&Commissioning of LT indoor 200AMP floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD shall be installed in the incomer. Separate Aluminium Earth bus bar should be installed. 01 number of 200 Amps 4P MCCB 25KA ( Make-LEGRAND/ Siemens/ Schneider). Onload type Changeover-01 number of 200 Amps 4P ( Make-LEGRAND/ Siemens/ Schneider) Busbar- 04 numbers of 200Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 4 no's 100-125 AMP 25KA MCCB ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9) Out going- (ii) 04 nos 40A 4P MCB FOR LIGHT BDB , 63A 4P MCB, 04 NOS FOR AC BDB ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9) Instrument- (i) 3 numbers phase indicating lamp with 2A SP MCB,C,10KA. (ii) 01 set of MFM with RS-485 & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model) providing with Floor Rubber mat 3'X2'X6 mm

Supply & Fixing of 2 ton Ac Machine /units must have a minimum BEE (Bureau of Energy Efficiency) 3-star being Specific ISEER (4.39). values as of 2025 year ,(Not acceptable of sub branding name of parent company make) Make -Daikin/Carrier/ Mitusubish) with warranty of 2 years. capacity- 2 Ton Split

S/F of 5KVA voltage stabiliser (CG/Shakti/V-guard/Autotac) (I/p-130V to 270V, O/P-200V to 240V)(9500-18%+7.5%+7.5%)

S/F of Metal Clad Industrial Type Plug, Socket, Interlocked Switch Socket Unit & Distribution Board. Industrial Socket with 20Amp SP MCB for AC point. make- Havells/ polycab/legrand/schneide

S/F of Copper Pipe 5/8" to 1/4"

S/F of Copper Pipe 1/2" to 1/4"

Supply of Invertor,UPS 2300VA Pure Shine wave (Make Microtech/Su-kam/Luminous/Crompton)

Supply of Invertor Battery 12V 160AH(Make Exide/Amrom/Su-kam/Luminous/Crompton with 48 Month warranty)

Supply of Invertor Stand(Make Microtech/Su-kam/Luminous/)

Please Enable Macros to View BoQ information