Additional Ambernath and Pale Industrial Area - PHASE 3... Providing Cement Concrete Roads for Balance Asphalt Roads

Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material

Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.

Providing and cast-in-situ Cement Concrete Pavement in M-40 grade of 300mm thickness including 150mm thick Dry Lean Concrete(DLC) in grade M-15. Item includes all expansion joints at 40mt c/c, MS bars at every 4 m C/C joints,runner RCC beams, providing cuts at 4mt c/c, ezy additive-additive to make concrete curing free and achieve high early strength, including geo polymer and all material, labour, transportation, taxes, royalty, octrai etc. complete.(Rate Excluding GST)

Providing and cast-in-situ Cement Concrete Pavement in M-60 grade of 250mm thickness including 150mm thick Dry Lean Concrete(DLC) in grade M-15. Item including cutting at every 1m c/c in both directions, filling joints , runner RCC beams etc, ezy additive-additive to make concrete curing free and achieve high early strength, including geo polymer and all material, labour, transportation, taxes, royalty, octrai etc. complete.(Rate Excluding GST)

Flexible pavement on edge/side of Concrete Pavement:- Providing and constructing flexible pavement by 75 mm DBM and 40 mm AC mm thick, etc. including all material, labour, transportation, taxes, royalty, octrai etc. complete. (Rate Excluding GST)

Providing half portion of 7.5 m carriage way road in motorable condition during execution of CC road including filling potholes with WMM 75 m thick, 75 mm thk semigrout and 20 mm thk pss . (Rate Excluding GST)

Providing half portion of 5.5 m carriage way road in motorable condition during execution of CC road including filling potholes with WMM 75 m thick, 75 mm thk semigrout and 20 mm thk pss . (Rate Excluding GST)

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 100MM thick in M-50 grade of approved size and shape for City streets and roads with high volume/ heavy traffice as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.

Providing and laying 40mm thick masticasphalt having bitumen content 10% by weight as per IS code no. 5317/2002.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 900mm diameter in proper line, level and slope etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-4 class of 1200mm diameter in proper line, level and slope etc. complete.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.

Providing and casting in situ or precast tapering R.C.C. M-20 Mountable type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015.

Numbery3.02-A) Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015)./3.04-A) 4mm aluminum composite material Class B:3.06-A) 900 mm made out of 4mm aluminum composite material>3.08-A) 600 mm dia made out of 3mm aluminum composite material&3.10-A) For providing two side boards.%3.10-B) For providing one side board.ŠBASIC TEST OF CEMENT: Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.YBASIC TEST OF AGGREGATE: Water Absorption, Specific Gravity,Impact Value, Crushing Value.(BASIC TEST OF AGGREGATE: Sieve Analysis.<BASIC TEST OF AGGREGATE: Flakiness Index

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 sq.km made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

瑡潩湉敤⹸;䴀塉䐠卅䝉㩎䜠䉓䴠硩䐠獥杩⹮䌯浥湥⁴牔慥整⁤畓⁢慂敳⠠䌠協⥂'䴀塉䐠卅䝉㩎圠瑥䴠硩䴠捡摡浡䴠硩䐠獥杩⹮G䘀义⁅䝁則䝅呁㩅䘠湩湥獥⁳潍畤畬⁳ 楓癥⁥湁污獹獩⤠匬汩⁴…汃祡䌠湯整瑮=䌀乏剃呅㩅䌠浯牰獥楳敶匠牴湥瑧⁨䙏䌠䌮‮畃敢⠠敓⁴景㌠挠扵獥⸩A䌀乏剃呅㩅䌠湯牣瑥⁥楍⁸敄楳湧⠠楗桴愠汬吠獥獴漠慢楳⁣慭整楲污⥳Q䌀乏剃呅⁅䅐䥖䝎䈠佌䭃㩓䌠浯牰獥楳敶匠牴湥瑧⁨‬慗整⁲扁潳灲楴湯⠬敓⁴景㠠䈠潬正⥳2匀䥏⁌ 啍啒㩍䌠浯慰瑣潩敔瑳⠠倠潲瑣牯䐠湥楳祴⤠䬮䥂啔䕍㩎倠湥瑥慲楴湯‬潓瑦湥湩⁧潐湩ⱴ䘠慬桳☠䘠物⁥潐湩ⱴ匠数楣楦⁣片癡瑩፹䥂啔䕍㩎嘠獩潣楳祴␮䥂啔䕍㩎䐠捵汩瑩⁹ 汅獡楴⁣敒潣敶祲)䈀呉䵕久›硅牴捡楴湯吠獥⹴䈨瑩浵湩畯⁳業⥸¥䈀呉䵕久›潊⁢楍⁸敄楳湧眠瑩⁨污敔瑳⁳湯愠杧敲慧整⠠硅汣摵湩⁧楢畴敭⥮映牯䐠䵂匯䉄⽃䍁匯䅍⠠瑓湯⁥慍瑳捩䄠桳桰污⥴⠠吠獥楴杮漠⁦楂畴敭桳污敢猠灥牥瑡汥⁹桃牡敧⥤-匀䕔䱅䈠剁吠卅䥔䝎›灕潴ㄠ‶浭⠠敓⁴景㌠䈠牡⥳’匀䕔䱅䈠剁吠卅䥔䝎›扁癯⁥㘱洠匨瑥漠⁦″慂獲 吨湥楳敬猠牴湥瑧ⱨ┠‬汅湯慧楴湯‬楙汥⁤瑓敲獳圬楥桧⵴敐⁲敍整Ⱳ䈠湥⁤ 敒敢摮吠獥ⱴ倠潲景匠牴獥⹳ة‱敔瑳 ㄀䴠硩䐠獥杩㱮
楄浳湡汴湩⁧景挠浥湥⁴潣据敲整瀠癡浥湥⁴祢洠捥慨楮慣敭湡⁳獵湩⁧湰略慭楴⁣潴汯ⱳ戠敲歡湩⁧潴瀠敩散⁳潮⁴硥散摥湩⁧⸰㈰挠浵椠潶畬敭愠摮猠潴正瀠汩湩⁧瑡搠獥杩慮整⁤潬慣楴湯⁳湡⁤楤灳獯污漠⁦楤浳湡汴摥洠瑡牥慩獬甠⁰潴愠氠慥⁤景ㄠ〰‰敭牴獥‬瑳捡楫杮猠牥楶散扡敬愠摮甠獮牥楶散扡敬洠瑡牥慩獬猠灥牡瑡汥⁹瑥⹣挠浯汰瑥⹥倀潲楶楤杮‬慌楹杮愠摮䨠楯瑮湩⁧䑈䕐瀠灩獥漠⁦䕐㠭‰牧摡⁥湡⁤乐㘭挠慬獳眠瑩⁨畢瑴樠楯瑮⁳瑥⹣潣灭敬整愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮〴‰浭搠慩⠠䑏逩牐癯摩湩Ⱨ䰠祡湩⁧湡⁤潊湩楴杮䠠偄⁅楰数⁳景倠ⵅ〸朠慲敤愠摮倠ⵎ‶汣獡⁳楷桴戠瑵⁴潪湩獴攠捴挮浯汰瑥⁥獡猠数楣楦摥愠摮搠物捥整⹤㈠〰洠楤⁡伨⥄ϋ倀潲楶楤杮愠摮挠湯瑳畲瑣湩⁧䍒⁃牴灡穥楯慤慭桮汯⁥档浡敢⁲景猠穩⁥⸱‵⁸⸱‵⁸″敤灥愠⁳数⁲敤慴汩摥搠慲楷杮愠摮搠獥杩湩汣摵湩⁧敲湩潦捲浥湥ⱴ映牯潷歲‬䍐ⱃ爠晡ⱴ猠整汥猠整獰‬畣楲杮‬慢正楦汬湩⁧瑥⹣椠据畬楤杮愠汬氠扡畯⁲湡⁤慭整楲污攠捴‮潣灭敬整‮桔⁥瑩浥琠湩汣摵⁥業楮畭㔱‰浭琠楨正䴠㈭〰倠䍃‮桔⁥慲瑦猠慨汬戠⁥景㌠〰洠桴捩湫獥⁳湩䴠㌭‵牧摡⁥湡⁤慷汬⁳景琠敨挠慨扭牥猠慨汬戠⁥景洠湩浩浵琠楨正敮獳漠⁦㔲‰浭椠ⵍ㔲朠慲敤漠⁦䍒⹃吠敨爠楥普牯散敭瑮猠慨汬戠⁥牴慥整⁤楷桴䄠瑮⁩潣牲獯癩⁥牴慥浴湥ⱴ朠潥瀠汯浹牥爠灡摩栠牡敤楮杮挠湯牣瑥⁥湡⁤敇歯敲整䌠⁒潃据敲整删獥牵慦楣杮䴠牯慴⹲吠敨椠湮牥愠摮攠瑸牥慮畳晲捡⁥景挠慨扭牥猠慨汬戠⁥汰獡整敲⁤楷桴㈠‰浭琠楨正猠湩汧⁥潣瑡愠摮ㄠ‵浭琠楨正戠獡⁥潣瑡爠獥数瑣癩汥⁹湡⁤湩敮⁲楳敤漠⁦档浡敢⁲桳污敢瀠楡瑮摥眠瑩⁨潣瑡漠⁦⁡慷整⁲慢敳⁤噕爠獥獩慴瑮䔠敶捲敲整吠灯匠慥敳污湡⹴吠敨挠慨扭牥猠慨汬戠⁥牰癯摩摥眠瑩⁨楆敢⁲敒湩潦捲摥倠汯浹牥䌠癯牥愠摮映慲敭‮汁獡瀠牥搠物捥楴湯⁳景䔠杮湩敥⵲湩挭慨杲⁥瑥⹣挠浯汰瑥⹥倀牥丠ᝯ
瑓楡汮獥⁳瑓敥䄨卉ⵉㄳ⤶䠠杩⁨敐晲牯慭据⁥慔灭牥倠潲景䐠畯汢⁥捁楴杮䄠剉删汥慥敳嘠污敶⁳潃普物業杮琠坁䅗䌠㔭㈱圠瑩⁨慴灭牥瀠潲景䄠物瘠湥⁴湡⁤卓›ㄳ‶汆瑯‬楗桴畯⁴獩汯瑡潩慖癬⁥湐ㄠ〮‮佈呓䙁佌⁎湡⁤慧歳瑥⁳湡⁤敳污⁳景䔠䑐⁍景朠慲敤圠㈠〷䘠慬杮摥搠楲汬摥愠⁳数⁲卉›㔱㠳༮⸸‷楄浳湡汴湩๧楄浳湡汴湩⁧䵈匀慴正湩ꉧ敒攭敲瑣湩⁧桴⁥潰敬⁳瑡瀠潲楶敤⁤䍃映畯摮瑡潩楷桴䨠戠汯獴‬牢捡敫ⱴ瀠潲楶敤⁤䕌⁄楦瑴湩Ⱨ挠湯敮瑣牯⁳瑥⹣椠慡牰癯摥洠湡敮⁲獡搠物捥整⁤祢䔠杮湩敥⵲湩挭慨杲⹥刀ⵥ牥捥楴杮琠敨䠠⽍潈⁴楄灰摥䜠污慶楮敺⁤潐敬⁳…楈桧䴭獡⁴伨ⵈ䵈Щ慥档䌀䌮‮潆湵慤楴湯đ䴀歡湩⁧ⵍ〲挠浥湥⁴潣据敲整映畯摮瑡潩祢挠湯楳敤楲杮琠敨猠晡⁥潳汩戠慥楲杮挠灡捡瑩⁹瑡猠瑩⁥獡ㄠ‰⽔煳洮愠⁴洲搠灥桴椠据畬楤杮攠捸癡瑡潩湡⁤楦楸杮瀠潲楶敤⁤畮⁴潢瑬⁳楷桴琠敨栠汥⁰景琠浥汰瑡ⱥ搠汵⁹汰獡整敲⁤獡瀠牥搠獥杩潣灭敬整⠠潦⁲㈱㔮慲獩湩⁧潬敷楲杮栠杩⁨慭瑳⸩伀瑵潤牯䘠瑩楴杮⁳䘨ⵇ䑏⥆䈀湵档漠⁦楗敲⁳在ⵇ䅍䈯⥗䴀瑥牥䰀⁔慃汢獥⠠汁浵湩浵 䌨ⵂ呌䄯⥌ē匀灵汰楹杮‬牥捥楴杮☠琠牥業慮楴杮䘠⁒䱘䕐椠獮汵瑡摥‬慧癬湡獩摥猠整汥映牯敭⁤楷敲愠浲畯敲⁤猨牴灩 慣汢ⱥㄠ〱‰⁖‴潣敲ㄠ‰煳‮浭‮污浵湩畩潣摮捵潴⁲潣灭敬整攠敲瑣摥眠瑩⁨汧湡獤☠氠杵⁳湯眠污⽬琠畲獳獥瀯汯⁥牯氠楡⁤湩瀠潲楶敤⁤牴湥档 楰数愠⁳数⁲灳捥晩捩瑡潩潮‮䉃䰭⽔䱁䌀扡敬䔠据潬畳敲⁳䌨ⵂ䕃⨩呌ⴠ䴠䉃⽳䴠䉃䌠慨杮⁥癏牥匠楷捴⁨匨ⵗ䍍⥂Ȗ匀灵汰楹杮☠攠敲瑣湩⁧桴敲⁥桰獡ⱥ㐠㔱ⱖ猠牴敥⁴楬桧⁴潣瑮潲慰敮灵潴琠敨洠硡氠慯⁤景ㄠ欲ⱗ吠乐䴠䉃㘠䄳‬潰摷牥挠慯整⁤剃䅃ㄠ‴坓⁇桳敥ⱴ漠瑵潤牯琠灹ⱥ栠癡湩⁧偉㐵‬䭉〱瀠潲整瑣潩畳瑩扡敬爠瑡湩⁧潣瑮捡潴Ⱳ㈠‴牨⹳愠瑳潲潮業慣楴敭猠楷捴⁨楷桴洠湩浩浵㔠礠慥獲戠瑡整祲戠捡灵‬畡潴洯湡慵敳敬瑣牯猠楷捴ⱨ传⽎䙏⁆異桳戠瑵潴獮‬湩楤慣潴⁲慬灭ⱳ挠湯牴汯眠物湩Ⱨ洠瑥牥湩⁧敤楶散‬瑥⹣映牯愠瑵浯瑡捩漠数慲楴湯眠瑩⁨癯牥畣牲湥ⱴ猠潨瑲挠物畣瑩‬慥瑲⁨慦汵⁴牰瑯捥楴湯漠牰癯摩摥椠潲牦浡⁥ 䍃映畯摮瑡潩獡瀠牥猠数楣楦慣楴湯匠ⵗ呓偃℮汐瑡ⱥ倠灩⁥祴数䔠牡桴湩⁧䔨ⵁ偅옩畓灰祬湩Ⱨ椠獮慴汬湩⁧湡⁤整瑳湩⁧慥瑲楨杮眠瑩⁨慧癬湡獩摥椠潲慥瑲⁨汰瑡⁥楳敺㘠‰⁸〶砠〠㘮挠潣灭敬整眠瑩⁨污捡散獳牯敩⁳景䜠⁉慭整楲污⁳…敲潣摲湩⁧桴⁥敲畳瑬⁳獡瀠牥猠数楣楦慣楴湯丠⹯䔠ⵁ偅 䄀捣獥潳楲獥欀汩杯慲䅭敒慢整映牯漠摬瀠汯獥眠瑩⁨牢捡敫⁴湡⁤慣汢獥‬敦摥牥瀠汩慬獲攠捴�硅慣慶楴湯映牯挠瑡档⼠猠摩⁥慷整⁲畧瑴牥椠污潳瑲⁳景猠楯獬琠桴⁥灳捥晩敩⁤敳瑣潩湩汣摵湩⁧瑳捡楫杮琠敨攠捸癡瑡摥猠畴晦椠⁡敲畧慬⁲畢摮愠摮搠獩潰楳杮漠⁦湵畳瑩扡敬漠⁲硥散獳猠畴晦愠⁳楤敲瑣摥愠汬猠牯獴漠⁦潳汩⹳Ç䔀捸癡瑡潩潦⁲慣捴⁨ 楳敤眠瑡牥朠瑵整⁲湩匠景⁴潲正猠牴瑡⁡潴琠敨猠数楣楦摥猠捥楴湯椠据畬楤杮猠慴正湩⁧桴⁥硥慣慶整⁤瑳晵⁦湩愠爠来汵牡戠湵⁤湡⁤楤灳獯湩⁧景甠獮極慴汢⁥牯攠捸獥⁳瑳晵⁦獡搠物捥整⹤â䔀捸癡瑡潩潦⁲慣捴⁨ 楳敤眠瑡牥朠瑵整獲椠慈摲爠捯瑳慲慴琠桴⁥灳捥晩敩⁤敳瑣潩湩汣摵湩⁧瑳捡楫杮琠敨攠捸癡瑡摥猠畴晦椠⁡敲畧慬⁲畢摮戠⁹档獩汥楬杮愠摮眠摥楧杮愠摮搠獩潰楳杮漠⁦湵畳瑩扡敬漠⁲硥散獳猠畴晦愠⁳楤敲瑣摥餮牐癯摩湩⁧⹄⹉瀠灩獥⠠異桳漠潪湩獴瀠敲獳牵⁥楰数⁳景䐠‮⹉漠⁦潦汬睯湩⁧汣獡⁳湡⁤楤浡瑥牥⁳潣普物業杮琠桴⁥⹉匠‮灳捥晩捩瑡潩湩汣獵癩⁥潣瑳漠⁦潪湩楴杮洠瑡牥慩獬⠠畒扢牥朠獡敫⁴景䔠䑐⁍畑污瑩⁹ 硥汣摵湩⁧升⁔敬楶摥戠⁹佇⁉…佇⁍湩愠汬爠獥数瑣椠据畬楤杮吠楨摲瀠牡祴椠獮数瑣潩档牡敧⁳景吠䥐䄠敧据⁹灡牰癯摥戠⁹䩍⁐湩汣摵湩⁧牔湡楳⁴湩畳慲据ⱥ删楡睬祡䘠敲杩瑨‬湕潬摡湩⁧牦浯爠楡睬祡眠条湯‬潌摡湩⁧湩潴吠畲正‬牔湡灳牯慴楴湯琠敤慰瑲敭瑮污猠潴敲‬湵潬摡湩Ⱨ猠慴正湩⁧瑥⹣挠浯汰瑥摥愠⁳楤敲瑣摥戠⁹湅楧敮牥椠档牡敧⁳䤨⁓㔱㘳㈯〰‱潦⁲楰数⁳湡⁤卉ㄠ㠵ㄯ㘹‹湡⁤卉ㄠ㠲〲ㄯ㠹‹牯氠瑡獥⁴摥ɩ楴湯爯癥獩潩楷桴愠敭摮敭瑮⁳潦⁲畒扢牥䜠獡敫獴∮ㄠ〰洠楤浡瑥牥鰮倢潲楶楤杮䐠䤮‮楰数⁳瀨獵⁨湯樠楯瑮⁳牰獥畳敲瀠灩獥漠⁦⹄䤠‮景映汯潬楷杮挠慬獳愠摮搠慩敭整獲挠湯楦浲湩⁧潴琠敨䤠‮⹓猠数楣楦慣楴湯椠据畬楳敶挠獯⁴景樠楯瑮湩⁧慭整楲污⁳刨扵敢⁲慧歳瑥漠⁦偅䵄儠慵楬祴⤠攠捸畬楤杮䜠呓氠癥敩⁤祢䜠䥏☠䜠䵏椠污敲灳捥⁴湩汣摵湩⁧桔物⁤慰瑲⁹湩灳捥楴湯挠慨杲獥漠⁦偔⁉杁湥祣愠灰潲敶⁤祢䴠偊椠据畬楤杮吠慲獮瑩椠獮牵湡散‬慒汩慷⁹牆楥桧ⱴ唠汮慯楤杮映潲慲

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of ____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

lway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/revision with amendments for Rubber Gaskets." - 150 mm diameter.]
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. - 100mm]
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour etc. complete. - 150mmÍ
Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc (Rate excluding GST)ëCutting of cast iron and CI/DI pipes of all classes with cutting tools, cutting machine and chamfering the edges etc complete in all respect and as directed by Engineer in Charge and for following diameters (Rate excluding GST) - 100mmëCutting of cast iron and CI/DI pipes of all classes with cutting tools, cutting machine and chamfering the edges etc complete in all respect and as directed by Engineer in Charge and for following diameters (Rate excluding GST) - 150mmk
Supplying, transporting and fixing S.P. fire hydrants including mouth piece, duck foot bend, S.V. as per specifications & drawing, fixing flanged socket, supplying and laying C.I./ M.S. pipe up to 2 mtrs. length and jointing the same with spun yarn, molten lead, including caulking etc. complete as directed & as specified by Engineer In Charge. (as per IS : 908)5
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. - 100mm5
Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. - 150mm
Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) - 100mm
Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) - 150mmProviding and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nut s, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by GolandGoMinallrespectetc.complete. - 100mmProviding and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nut s, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation and excluding all statutary duties and taxes such as GST levied by GolandGoMinallrespectetc.complete. - 150mmProviding and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables 12 to table 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM gaskets, Nut s, Bolts, Washers and Ductile iron follower glands. Fittings should be with internally Ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coatin

Providing and fixing Mandatory/Regulatory sign boards in circular shape of ___mm dia made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

扭牥慮桴⠠䌠 楄楶楳湯✮潃瑮慲瑣丠㩯†䔠乔丠⹏㌵䘠剏㈠㈰ⴵ〲㘲㠠䕓䤭ⵉ倠潲楶楤杮䌠⁄潷歲ⱳ䜠瑵整獲‬灁牰慯档獥映牯爠慯獤JȈ匀ⵅ噉‭敔瑳湩⁧桃牡敧⁳䘨塉䑅删呁⥅映牯删瑡⁥汐慥敳删晥牥吠湥敤⁲潄畣敭瑮ᜠ㐀⌀㄀

Providing and fixing standard size MIDC name board or layout board, 3.66 m x 2.44 m made from MS angle frame 40 x 40 x 6 mm and 25 x 25 x 5 mm and MS flats 25 mm x 3 mm as per drawings, 16 gauge GI sheets including MS stand posts 5.5 m high made out of 75 x 75 x 6mm MS angle diagonal braces of 75 x 75 x 6 mm angles and horizontal braces of 40 x 40 x 6 mm angles including excavation of pits of size 0.61 m x 1.3 m x 0.7 m and 1:2:4 cement concrete of size 0.61 x 1.3 x 0.92 m welding, bolting, erecting in position, transporting and painting to complete structure with synthetic enamel paint two coats over anti-

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)

corrosive primer in 3 coats as per approved colour scheme with painting of lettering of required size and design etc. as per drawings. (Rates excluding GST)