SPECIAL REPAIRS TO BLDG NO T28 NEAR AUDITORIUM IN RA AT CAD PULGAON

Amount

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheets complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheets complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) qualityA complete all as specified and as directed.

Supply & Fixing Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-410W Gde-E-250 complete all as specified & directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed .

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing old painted surfaces, of steel and iron work of any description not otherwise described exc 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Dismantling ceiling boards/insulation boards as in ceiling of any description or size including cover fillets complete all as specified.

M&L 8 mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 22x22mm of white colour all as per instruction complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed.

S&F powder coated Aluminium frame work in partition/doors/windows with shutter all a round and including aluminium beading,glazing cleats fixed in frames, Neoprene rubber beading/packing including 150 mm door handle and 200 mm tower bolt etc complete all as specified and as directed.

S&F in repairs 12 mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S& F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S & F in repair decorative aluminium grill,weight not less than 3.131 kg/sqm (with frame of size 20x20mm aluminium cleat screwed to main frame) and fixed to wall/window/ventilator with screws complete all as specified and as directed.

S&F cast iron body Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140mm long complete all as specified and as directed.

S&F Mortice lock, vertical type, size 100 mmMild Steel 4 levers complete all as specified and as directed

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and directed .

M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection , finished fair and even, without using extra cement.complete all as specifed and as directed

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement including Taking down complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement including Taking down complete all as specified and as directed.

M & L to apply 3 mm thick or two coat wall care putty over on plastered surfaces for even & smooth finishing complete all as specified and directed .

M&L for preparing surfaces of plastered or unplastered wall and applying two coat of OBD over a coat of alkali resistance primer complete all as specified and as directed.

M&L for preparing surfaces of plastered or unplastered wall and applying two coat of cement base paint over a coat of alkali resistance primer complete all as specified and as directed.

M&L for Complete removal of existing treatment on old surfaces on walls and applying two coats of oil bound distermper on walls over a coat wall care putty complete all as specified and as directed.

M & L for Complete removal of existing treatment on old surfaces on walls and applying two coat of cement base paint over a coat of alkali resistance primer including preparation of old surfaces complete all as specified and as directed.

M&L point wiring complete with 1.5sqmm single core sheathed PVC insulated FRLS cable 1100 V grade multistranded copper conductor of different code of ISI marked drawn through and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly including provision of PVC box of suitable size for mounting switches / sockets and fan regulators etc including taking down carefully of existing old unserviceable wiring complete all as specified and directed for the following:

One light point controlled by one switch one way

One ceiling fan / exhaust fan / wall mounting fan point controlled by one switch one way

One socket outlet three pin 5/6 Amps controlled by one switch on the same board.

One switch socket outlet three pin 5 /6 Amps controlled by one switch on independent board.

M&L for point wiring with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLS , PVC insulated and sheathed cabel 1100 volts grade, ISI marked drawn in and incl PVC casing caping of suitable size with accessories ISI marked incl PVC insulated copper cable for earth of same type and sized connected to earth dolly complete all as specified and directed.

M&L in replacement switch piano flush type single pole,one way, 5 Amps, 240 V complete all as specified and directed.

S&F in replacement socket outlet 5/6 pin type,5 Amps, 240 V complete all as specified and directed.

Supply & fix switch socket combination flush type 2 and 3 pin, 5 Amps, 250 volts, AC, multipurpose all as specified and as directed.

S&F in replacement switch socket combination flush type (multipurpose type) but 5A/16A, 5 in 1 15 Amps, 240V complete all as specified and directed. Make : Anchor/Havells/cona

S&F in replacement ceiling rose surface type with 3 terminals complete including taking down old U/S one .Make : Havells/SSK/Cona

S&F fan regulator electronic step type AC 240 Volts,50 Hz complete including taking down old U/S one . Make : Anchor/Cona/Havells

S&F lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. Make: PLAZA/SSK/Cona.

S&F in replacement LED Batten suitable for LED -T8 Retrofit 1x 18/20W all as specified and directed. Make:- Crompton/Havells /Philips.

S&F in replacement LED Retrofit tube 1 x 18/20 watt (single / double side connection) all as specified and directed. Make:- Crompton/Havells /Philips.

Supply and fix in replacement of LED recessed mounted 2' X 2' 36 Watt light along with fixture including taking down old unserviceable FTL any type complete all as specified and as directed.

Supply and Fix in replacement to wall / pole of any height LED bldg security light 36 watt including GI pipe sutaible dia bracket not less than 1 mtr bend to shape with 2 clamps, nuts, bolts, washers and PVC 3 core ISI mark flexible wire from ceiling rose to fitting complete including taking down old one all as specified and directed.

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall, ceiling and making good surfaces to match with original status as specified and directed

M&L for sub main wiring alongwith 2 run of 4sqmm PVC FRLS copper cable and 1run of 4 sqmm PVC FRLS copper cable for earth wire insulated copper cable conductor, single core cable in PVC casing caping of suitable size with accessories ISI marked on wall/ceiling complete all as specified and as directed Note:- 2 runs of wire and 1 run of earth wire will be measured as one unit i.e RM

All as per item No 43.00 above but for 2 run of 6sqmm PVC FRLS copper cable and 1run of 6 sqmm PVC FRLS copper cable for earth wire complete all as specified and as directed.

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 8 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete including taking down old one complete all as specified and as directed Make : Havells/legrand/Schneider

S&F in replacement of sheet steel enclosure with double door flush mounting ,MCB, DB, SPN, 4 ways,240 volt factory fitted rated bus bars,earth bar,neutral links complete incl. blanking plates as required & making good the disturbed surfaces complete including taking down old one complete all as specified and as directed Make : Havells/legrand/Schneider

S&F in replacement of MCB SPN 40-63 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series complete including taking down old one all as specified and directed. Make:Havells/Legrand/Schneider

S&F in replacement of MCB SPN 32 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series complete including taking down old one all as specified and directed. Make:Havells/Legrand/Schneider

S&F in replacement of MCB SP 06-32 Amps 240V ,50 Hz, breaking capacity 10 KA," C " series complete including taking down old one all as specified and directed. Make:Havells/Legrand/Schneider

Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation, laying of cable or pipe and getting out in soft/loose soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and as directed.

Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, wtering, and well ramming complete all as specified and as directed.

Removing surplus excavated soil to a distance n.exc. 50 metre and depositing where directed at a level n.exc.1.5 metre high from the starting point complete all as specified and as directed.

M & L for sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection incliding levellling and consolidation complete all as specified and as directed. Note Punned thickness shall be measured.

Supply and laying brick sub class "B" having minimum compressive strength 75 kg/sqcm laid in trenches for cable protection etc complete all as specified and as directed.

Taking out LT XLPE/PVC insulated armoured cable alongwith all joints of any size from trenches wall/roof including taking out of brick layer and sand from trenches complete all as specified and as directed

Supply, laying and testing 16 Sq mm 4 core LT XLPE insuated cable PVC bedded galvanised steel strip or wire armoured earthed electric power cable with aluminium conductor 1100 volts grade, heavy duty in trenches/along pole or wall complete all as specified and as directed . Note:- 1. Excavation and earth work, sand cushioning, brick pipes, clamps, and cable joint shall be measured and paid separetely under respective items :

All as per item No 56.00 above but for 10 Sq mm 2 core

Supply and lay pipe galvanized, “light grade”, including fittings 40 mm dia for Cable Protection Pipe.

Supply and fix exhaust fan AC single phase 230/240 V of size 300mm sweep with louver complete all as specified and as directed. Make- Havells,Bajaj, Crompton

Material and Labour for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground earth bit not less than 2.25m deep below ground level with top edge of plate not less than 1.5m below normal ground level connected to 4.00mm dia by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, medium grade 7.5m long as applicable and as per plate No. 3 of SSR Part-I 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover or reinforcement with 8mm TMT bars at 100mm c/c bothways with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 15mm nominal bore medium grade GI protection pipe upto 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

Chhabra Enterprises

M/s Prakash Agencies

Ankit Construction

SHRI RANI SATI TRADERS

Bidder Name

Ankit Construction

SHRI RANI SATI TRADERS

M/s Prakash Agencies

Chhabra Enterprises

Krishana electronics