REPAIR REPLACEMENT OF GI CI DI PIPE LINE AND MISC WORKS OF CHARARI JK COLONY NARENDRA GROUND RAMADEVI COLONY IN DOMESTIC AREA AT AF STN CHAKERI KANPUR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling,including spreading levelling watering and well ramming in layers not exceeding 25cm thick in solf/loose soil after pipes are laid and tested complete all as specified and directed .

Removing of excavated material (soils) not exc 50 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

S&F in replacement of ISI Marked Gun metal Gate valve with iron wheel head, screwed both ends for iron pipe of the following size 15 mm bore pipe complete all as specified and directed. Make-Zoloto/Sant/Leader

All as per item No 04 but size 20 mm bore .

All as per item No 04 but size 25 mm bore.

All as per item No 04 but size 40 mm bore.

All as per item No 04 but size 50 mm bore.

S&F in replacement bib tap 15 mm size standard of PTMT any colour high pressure screwed for iron pipes complete all as specified and directed. Make- Prayag/Jaguar/Polytuff

S&F in replacement of float valve (ball valves) high pressure of PTMT with epoxy coated alluminium rod & high density plastic ball screwed for iron pipe of the Size 20 mm bore complete all as specified and directed. Make-Prayag/Polytuff

Taking up or down steel water tubing and connections including cleaning for re-fixing or removal of sizes 15 mm bore complete all as specified and directed. Note :- Excavation work shall be measured and paid separately under respective item of BOQ.

All as per item No 11 but size 20 mm bore.

All as per item No 11 but size 25 mm bore.

All as per item No 11 but size 40 mm bore.

All as per item No 11 but size 50 mm bore.

Re-fixing old steel tubing obtained from item No 11 above and connection in new or old position in trenches/wall/ ceiling/ floors etc with using all new GI fittings complete including making good the disturbed portion for the size 15 mm bore complete all as specified and directed.

All as per item No 16 but size 20 mm bore. Note:- Old GI pipe 20 mm bore shall be taken from item No 12 of BOQ.

All as per item No 16 but size 25 mm bore. Note:- Old GI pipe 25 mm bore shall be taken from item No 13 of BOQ.

All as per item No 16 but size 40 mm bore. Note:- Old GI pipe 40 mm bore shall be taken from item No 14 of BOQ.

All as per item No 16 but size 50 mm bore. Note:- Old GI pipe 50 mm bore shall be taken from item No 15 of BOQ.

Supply,Laying, jointing and leakage testing GI Pipe medium grade size 15mm bore pipe including supply and fixing of all GI fittings such as bend, tee, elbow, union, reducer etc, laid in trenches / floor/ walls etc complete all as specified and directed Notes : (i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a purticular quarter, building block or a group of blocks.) (ii) Excavation & earth work shall be measured & paid seperately. Make :-Jindal/Tata/Zenith/Prakash Surya

All as per item No 21 but size 20 mm bore.

All as per item No 21 but size 25 mm bore.

All as per item No 21 but size 40 mm bore.

All as per item No 21 but size 50 mm bore.

Supply & fixing in replacement sluice valves 200 mm dia class PN-1.0 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as specified and directed. Make Kirloskar /Upadhaya /Leader

All as per item No 26 but size 150 mm dia bore.

All as per item No 26 but size 100 mm dia bore.

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

M & L for providing PCC 1:2:4 type B1 using 20mm graded aggregate as in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars complete all as specified and directed.

Attending of day to day complaints of water supply of all nature i.e. leakage in water GI pipe lines ,fittings /fixture , no water supply including all type of complaint noted in complaint register all complaints slips received from the complaint cell and deposit the complaint slip after reactification and obtained signature of users with necessary T & P with experianced one pipe fitter and one helper and GI fittings i.e. elbow,tee,reducer,union,long screw socket ,nipple ,plug etc including necessary excavation ,returning filling work complete all as directed . Note : The complaint shall be attended and defect shall be rectified with in 24 hrs commencing from the date and time of notifying the complaint failing which a penalty @ Rs 100 per complaint per day shall be recovered from fianl bill/ RAR.

M&L for centrifugally cast (spun) ductile iron pressure pipes 100 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed ..Make Electro steel/Jindal / TaTa/Jai Balaji Note :- Rubber gasket joint will be measured and paid seperately under respective item.

M&L for centrifugally cast (spun) ductile iron pressure pipes 150 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed. Make:- Electro steel/Jindal / TATA/Jai Balaji Note :- Rubber gasket joint will be measured and paid seperately under respective item.

Taking up cast iron water mains 100 mm bore including all fittings with spigot and socketed ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron water mains 150 mm bore including all fittings with spigot and socketed ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

M & L in replacement of rubber gasket joint of the size 100 mm size for CI/DI flanged type pipe including nut, bolt, washer complete all as specified and directed .

M & L in replacement of rubber gasket joint of the size 150 mm size for CI/DI flanged type pipe including nut, bolt, washer complete all as specified and directed .

M&L in replacement for CI/DI fittings such as bends , collars, caps, plugs, connecting pieces any type upto 150mm dia complete all as specified and directed.

M&L in replacement for cast iron detachable joints ( D Joint), suitable for CI pipe line 100mm dia complte with full thread 12 mm dia nut and bolts and washers incl two Nos rubber rings complete all as specified and directed.

M&L in replacement for cast iron detachable joints (D Joint) suitable for CI pipe line 150mm dia complte with full thread 12 mm dia nut and bolts and washers incl two Nos rubber rings complete all as specified and directed.

M & L for construction of valve chamber in replacement 1000 mm x 1000 mm x 1000 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 using 40 mm graded stone aggregate 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M & L for construction of valve chamber in replacement 1200 mm x 1200 mm x 1200 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 40 mm graded stone aggregate 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M & L for construction of valve chamber in replacement 900 mm x900 mm x900 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 40 mm graded stone aggregate 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M & L for construction of valve chamber in replacement 600 mm x 600 mm x 600 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 40 mm graded stone aggregate 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed.

M&L in replacement of flat iron Clamp 50 mm x 6 mm welded with 20 mm GI socket including necessary nut and bolts complete all as specified for the Size 100 mm bore.

All as per item No 45 but size 150 mm bore.

M&L overhauling of sluice valve and replacement of minor items such as spindle,plares,nut bolt if required at site of size 150/100mm complete all as specified and directed.

H S ENTERPRISES

PAWAN COOL CORPORATION