Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹32.9 L+₹4.3 L (15.0%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹33.8 L+₹5.2 L (18.2%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹37.2 L+₹8.6 L (30.2%)Rejected-Finance 1331 GENERAL GANJ OPP WATER TANK MATHURA 281001 | MATHURA | UTTAR PRADESH | 281001 | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹38.0 L+₹9.4 L (33.0%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST MATHURA
Garrison Engineer East Military Engineer Services Mathura Cantt Mathura 281001
REPAIR WOODEN ALUMINIUM STEEL JOINERY AND MISC CONNECTED WORKS IN ZONE B AREA UNDER GE (EAST) MATHURA
2024_MES_649984_1
8200-1415/E8
Open Tender
Civil Works
Item Rate
180 days
GE EAST MATHURA
AS PER TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
GE EAST MATHURA
₹90,000
29 Jun 2024
12 Apr 2024
13 May 2024
12 Apr 2024
4 May 2024
27 Apr 2024
12 Apr 2024 - 4 May 2024
Amount
Taking down chowkhats or frames with shutter (without taking off shutter from the frames) area not exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutter (without taking off shutters from the frames) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description n exc 1 sq.m each complete all as specified and as directed.
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.
S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.with one shop coat of red oxide primer complete as specified and as directed.
S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.
M&L for cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of steel frame complete all as specified and as directed.
Cutting holes in existing wall built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick complete all as specified and as directed.
S&F 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel commercial type on both sides complete all as specified and as directed.
S&F 35 mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick one side prelam colour PVC sheet reinforced with M.S. Square tube & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed.
S&F But hinges 100 mm size of mild steel, medium weight, cold rolled complete all as specified and as directed.
S&F But hinges 100 mm size of extruded aluminium alloy with anodized and fixed type B-21 complete all as specified and as directed.
S&F floor door stopper of aluminium anodised body and tengue, anodised with hard drwan steel spring overall length of cover plate 150 mm complete all as specfied and as directed.
S&F Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded fixed to wall including one shop coat of primer complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded fixed to wall including one shop coat of primer complete all as specified and directed.
M&L mild steel ventilator with top hung shutter including hinges, steel peg stay including one coat of zink chromate primer complete all as specified and as directed directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as spicified and as directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as spicified and as directed.
S&F 5.5 mm thick tinted glass, including glazing with necessary beads area exc. 0.5 square metre in each pane etc complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete all as specified and as directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/rubber/steel beading etc n.exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F 4 mm thick figured glass, pin head type ordinary quality and glazing with oil putty/rubber/steel beading etc n.exc 0.50 Sqm in each pane complete all as specified and as directed
S&F 4 mm thick pin head type sheet glass ordinary quality and glazing with oil putty/rubber/steel beading etc exc 0.50 Sqm in each pane complete all as specified and as directed.
M&l for preparation of new primed steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M&l for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide chromate primer complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and as directed.
Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed.
S&F 18 mm thick Hybrid WPC board in cupboard shutter/ shelves/kitchen cabinet decorative choice laminated on one side and other side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt, design and colour as approved by GE complete all as specified and as directed.
S&F 18 mm thick Hybrid WPC board in cupboard shutter/ shelves/kitchen cabinet with both side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt, design and colour as approved by GE complete all as specified and as directed.
S&F 19/20 mm thick Prelaminated particle board, interior grade, prelaminated one sides with decorative choice laminations and other side balancing white lamination fixed with screws for timber frame work complete all as specified and as directed.
S&F 12 mm thick Hybrid WPC board in cupboard shutter/ shelves/kitchen cabinet with both side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt, alongwith modular handles, design and colour as approved by GE complete all as specified and as directed.
S & F Magnatic catcher of size 20mm x 50mm suitable for cup board/kitchen cabinet shutter complete all as specified and as directed.
S&F clean sawn timber frame second class hard wood in scantlings complete all as specified and as directed.
S&F 100 mm long stainless steel handles, cast type complete all as specified and as directed.
S&F ball bearing runners 450mm Telescopic (KTS-20) full extension load carring capacity 50 Kgs complete all as specified and as directed.
S&F Continuous (piano) hinges width of flaps 40 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed,
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F anodised aluminium snap grid frame of size 605 mm x 605 mm for false ceiling including providing hangers of 6mm GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.
M&L for 4 mm thick designer non-asbestos fibre cement building board fixed or laid/inserted in timber/GI/aluminium frame work with screw complete all as specified and as directed.
S&F powder coated anodised Aluminium frame for doors, windows (two track sliding/openable window), ventilators, partitions etc (Thickness of powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
M&L for powder coated aluminium door shutters (Thickness or powder coating not less than 50 micron) anodised aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed.
S&F 4 mm thick ACP sheet interior grade, prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed in aluminium shutters, frame complete all as specified and as directed.
S&F 75mm size powder coated aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/rubber/steel beading etc exc 0.50 Sqm in each pane complete all as specified and as directed.
S&F 5 mm thick figured glass, pin head type ordinary quality and glazing with oil putty/rubber/steel beading etc n.exc 0.50 Sqm in each pane complete all as specified and as directed
S&F 6mm thick aluminium deco grill mesh made out mesh size n exc 50mm x 50mm fixed with F channel/U channel complete all as specified and as directed.
S&F in repairs Aluminium (die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S&F mild steel mortice lock vertical type100 mm size 4-lever with two keys complete all as specified and as directed.
Taking down existing aluminium door frame including glazed shutter & builders hardware complete of area exc 1.5 sqm and not exc 4 sqm each of any description and refixing in the same opening after carying out necessary repair & replacement of unserviceable components/hardware to make if fully functional complete all as specified and as directed. Note : (i) Cost of new jointing cleat, aluminium beading, glazing clips, rubber packing stays including cutting of old style etc and adjusting the same appropriately deemed to included in the unit rate of this itmes nothing extra shall be paid on this account. (ii) Glazing, new aluminium section for frame/shutter, builders hardware such as handles, hinges door closures floor door spring shall be measured & paid for separately. (iii) Loose corner joints of frame & shutter shall be tightned by providing suitable cleats made out of aluminium angle of appropriates size fixed with nut & bolts to make joints at 90 degree.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
M&L for 12 mm thick plain/Frosted tuffened glass on opening and shelves/Partition including cutting and grooving on wall with or without aluminium frame, rail, handle lock etc including floor machine ,roller. stainless steel lock fixed to toughen glass door shutter, horizontal type, 4 levers, complete all as specified and as directed.
Taking down 12mm thick toughen glass of size exc 1.5 Sqm but n'exc 4 Sqm each for repairing of hardware fittings such as Handle, Lock, floor spring, bottom &Top pivot, etc and refixing in same opening complete all as specified and as directed.
S&F in repair mild steel mortice lock vertical type100 mm size 4-lever complete all as specified and as directed.
S&F in repair stainless steel lock fixed to toughen glass door shutter, horizontal type, 4 levers, complete all as specified and as directed.
S&F in repair 25mm dia stainless steel tubular curtain rod with brackets, stops, roller etc complete all as specified and as directed.
S&F in repair Door Seal fixed to door bottom rail with screws complete all as specified and as directed.
M&L for spot welding in repair n exc 2.5 cm in length thickness of metal to be welded not exc 6mm for fixing hinges, handle, bolts, helical door spring to iron surfaces etc. complete all as specified and as directed.
Taking down old unserviceable cooler stand/ladders/frame of any size & any type fixed on external face of walls at cill level of windows at ground floor and first floor of building including cutting holes and making good the disturbed portion with cement mortar or PCC after refixing new cooler stand complete all as specified and as directed.
S&F in repair stainless steel handles 125 mm size for kitchen cabinet shutters complete all as specified and as directed.
S&F in repair Floor door stopper of overall length of cover plate 140mm Aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.
S&F teak wood lipping, 6mm thick fixed with nails to 18/19mm thick block board or veneered particle board complete all as specified and as directed.
S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts 250mm long of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F in repair 100 mm size Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.
S&F in repair 150mm Aluminium handles, fabricated type, anodised complete all as specified and as directed.
S&F in repair 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F in repair 300mm, Mild steel ordinary rat tail rod pattern door springs ISI marked including roller and roller plate complete all as specified and as directed.
M&L resecuring or easing & adjusting without taking down door shutter of any description not exc 1 sqm each complete all as specified and as directed.
M&L resecuring or easing & adjusting without taking down door shutter of any description exc 1 sqm but not exc 2.00 sqm each complete all as specified and directed.
S&F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F solid PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed..
S&F 5mm thick PVC Sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.
Taking down cement plaster on brick walls and concrete surface including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar 1:3 finished even & smooth (without using extra cement) complete all as specified and as directed.
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L preparation of newly plastered surfaces of walls providing 1mm wall care putty to achieve smooth surface and applying two coats of oil bound distemper over and including a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower complete all as specified and as directed.
M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:3 complete all as specified and as directed.
M&L for coloured joint free Non Skid ceramic coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 complete all as specified and as directed.
Demolition of stone slabs of any description or thickness in floors/apron etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20mm thick black granite (of any type) work (table rubbed and polished) single piece in steps Jabms pillar, window cills, cooking platform and like laid over and including 15mm thick screed bed in cement mortar 1:6 and pointing in white cement (1:2) using marble, dust with admixture of pigment to match the shade of granite complete all as specified and as directed.
S&F in repair plate rack made of stainless steel sheet 1mm thick for kitchen overall size 900mm x 750mm x 255 mm complete all as specified and as directed.
M/s RCC
M/S CHAUDHARY CONSTRUCTION
JWALA ELECTRIC CONTRACTORS
R N AGRAWAL
Ahmed constructions
M/S United Builders
M/s Singh Engineering Corporation
M/s Orient Traders
M/s Hoti Lal Contractor
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .