Providing Pipeline and road facilities to the internal streets of Vadukuppam Village

Amount

Code No. 2.3.1A :Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness - by manual means in area of light jungle.

Code No. 2.27C.1 :Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods , watering , rolling each layer with 1/2 tonne roller ,or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (Payment will be made based on level measurement)

Code No. 4.91B:- Providing, laying, spreading and compacting bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth three wheeled steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum / gravel for screening and gravel for binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-I with Gravel screening. (As per MoRTH specification, 4th Revision)

Code No. 4.92.C :Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth 3 wheeld steel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite Crushable type such as moorum or gravel for screening and gravelfor binding to fill up the interstices of coarse aggregate, watering and compacting to the required density - by manual means - Water bound macadam Gr-II with moorum or gravel screening. (As per MoRTH specification, 4th Revision)

Code No. 6.1.MO: Cleaning the existing W.B.M. road surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bag and/or compressed air to receive bituminous treatment. As per clause no 502.4.2 and 503.3.1 of MOST specification.

Code No. 6.5F.1.MO :Providing and applying tack coat on the prepared surface, heating bitumen in boiler and spraying the bitumen with sprayset fitted on bitumen boiler - on granular base such as WBM and WMM surfaces not bitumen primed. Rate of application 10kg/10sqm.

Code No. 6.11B.MO :Providing and laying open graded premix carpet 20mm thick on prepared surface in a single course as wearing course composed of specified size of stone aggregates premix with a bituminous binder in mini hot mix plant 6 to 10 tonne laying manually and rolling with power roller 8 to 10 tonne but excluding cost of primer/tack coat. As per clause no 509 of MOST specification.

Code No. 6.17.MO : Providing and applying premixed seal coat type `B' comprising of thin application of fine aggregate premix with bitumen binder in mini hot mix lant,carriage manually of mixed material and laying and rolling with power roller 8 to 10 tonne. As per clause no 513 of MOST specification

Code No. 2.10.1.2 :Excavation trenches of required width for pipes, cables, etc including exvation for sockets,and dressing of sides, ramming of bottoms, lift pto 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m - hard rock (blasting prohibited)

Code No.31.161.1F : : Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore /Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 110mm dia.

Code No. 31.161.1G :- Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 140mm dia.

Code No. 31.136.1K :- Providing, laying and jointing G.I pipes of medium class (blue)(TATA,TNT,Nezone,Apollo,Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,excluding GI specials such as bends,tees, elbow,coupling,reducer etc.,complete all as per IS and CPWD specification. -150mm dia

Code No. 31.136.1I:- Providing, laying and jointing G.I pipes of medium class (blue)(TATA,TNT,Nezone,Apollo,Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,excluding GI specials such as bends,tees, elbow,coupling,reducer etc.,complete all as per IS and CPWD specification. -100mm dia

Code No. 31.164.1L : Providing and fixing in position UPVC moulded equal Tee (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 110mm dia

Code No. 31.168.1M :- Providing and fixing in position UPVC moulded elbow (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 110mm dia

Code No. 31.171.1I : Providing and fixing in position UPVC moulded endcap (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia

Code No. 31.164.1M :- Providing and fixing in position UPVC moulded equal Tee (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 140mm dia

Code No. 31.168.1N: Providing and fixing in position UPVC no moulded elbow (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 140mm dia

Code No. 31.171.1J : Providing and fixing in position UPVC moulded endcap (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete 140mm dia

Code No. 31.141.1G :Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc , complete 80 mm dia.

Code No. 31.137.1H : Providing and fixing in position G.I. equal Tee (UNIQUE/R Brand/HB Brand/UI Brand)conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete- 80mm dia.

Code No. 31.273.1D :Supplying,fixing and lowering into the borewell the GI pipes of medium class (TATA,TNT,Nezone,Apollo,Zenith) which are to be connected to the submersible pump,including labour charges,jointing materials etc.,complete.-100 mm dia

Code No. 31.167.1K: Providing and fixing in position UPVC moulded reducer coupler (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110 x 90mm dia

Code No. 31.131.1B :Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 100 mm dia.

Code No. 31.170.1F :Providing and fixing in position Upvc moulded female threaded adopter (Finolex / jain) (0.6 Mpa conforming to IS 7834 part II and ISI marked labour charges for jointing, jointing materials etc, complete -90 x 75mm dia

Code No. 31.256.1D :Supplying and fixing of fully automatic air break star-dalta starter range for 20A to 33A F.A.S.D ( Bharat Culter Hammer / L6T / Siemens make) with suitable M.S. angle frame etc., complete. - 30HP pumsets.

Code No. 31.48.2A :Providing and fixing C.I. sluice valve (PN 1) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 80 mm dia.

Code No. 31.48.2D :Providing and fixing C.I. sluice valve (PN 1) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 150 mm dia.

Code No. 31.48.7C:Providing and fixing C.I. non return valve (PN 1.6) conforming to IS 5312 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 80 mm dia

Code No. 31.5.1B: Making connection of UPVC distribution branch with Upvc main of following sizes by providing and fixing tee including cutting the pipe etc., complete, - 110 mm dia to 160 mm dia nominal bore

Code No.31.250.1J :Supplying of electrically operated wettype submersible motor and umpset(Texmo/KSB/Taro/Kirloskar make) , AC 3 Phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages having outlet size of 2" /2.5" /3"/4" dia, to suit the borewell (150/200mm dia)., complete. The rate include , all taxes Puducherry. the pumpset shall be guranteed for a perod of one year from the date of commissioning .(20 HP submersibe motor and pumpset)

Krishna kumar

M Dhanasekar

S Palanivel

M SARAVANAN