Providing electrification works at 1st floor of Staff Recreation Club building in NITK

Amount

Open Conduit system: Supplying heavy gauge PVC conduit pipe of 25mm dia. 2 mm thick PVC conduit conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. Make: Finolex/ Universal/ VIP/ Bajaj Plast/ Polycab/ Nelco/ equivalent other makes.

Supplying of LT UG Cable – 16Sqmm 4Core (11 GI Strips – 4x0.8mm) : Supplying of LT UG Cable – 16Sqmm 4Core (11GI Strips – 4x0.8mm) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.

Laying UG cable: Labour charges for laying of 2.5 to 25Sqmm size 1.1 kV class UG cable in existing trench / on wall. using Wooden / Aluminum Rollers as directed by the Engineer in charge – 4 C X 16 Sq.mm.

Point wiring using copper wire without switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm(P&N) & 1x1.0sqmm (E ) copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. - Long point above 6mtr up to 10mtr from tapping point to outlet via switch

Supply and fixing 16Amps Socket on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing 16Amps Switch on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing 6Amps SP Switch on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing 5Amps Socket on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Wiring for Lighting / Power Circuit: Wiring for Light/power circuit using 4 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Lighting / Power Circuit: Wiring for Light/power circuit using 2.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Lighting / Power Circuit: Wiring for Light/power circuit using 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

15” Sweep(450mm) Copper winding Exhaust fan: Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete and as per the direction of the Engineer In-charge.

Flush mount teak wooden box of 4”x4”x3”: Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.

Polished wooden board 12”x10”x1.5”: Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2pieces and fixing the same to the wall using tapered inverted wooden plugs screws.

Fixing of Ceiling / Wall mounting fan: Fixing of ceiling / wall mounting fan of all capacities and all types with necessary clamps, angular, / to the existing S hook, with fan regulator, together with supplying and fixing a 5 ampere ceiling rose, necessary length of 23 / 0.0076” PVC insulated twin twisted copper wire and wiring complete.

63A TPN MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 63A TPN MCB

20A SP MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 20A SP MCB

LED Batten fitting 0.60mtr (2feet)-36W - Supplying of LED light batten fitting with integrated LED high quality diffuser with life of 25000 burning hours and 70% lumen maintenance with CRI> 80. Power input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved 2 years warranty against any manufacturing defect working under standard electrical condition. And as per the direction of the Engineer In-Charge

8Way SP&N double door DB: Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.

Chemical Earthing: Supplying & Fixing Chemical earthing for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to per missible limits, superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm - Using 6ft. Copper bonded rod with backfill compound

GI Strips: Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip.

SUDHIR ELECTRICALS (BID ID -3153435)

Raaj power solutions and facilities (BID ID -3153633)