Construction of New ICDS centre building at kennadi Hospital campus Balarengapuram D2D2 Road in ward no 44

Amount

Charges for putting bore hole of size 23 cm of pile foundation up to hard stage of sand clay other bulb rate to fix all labour charges for boxing hire charges for boring set and all other T&P employed etc, complete.

Earth work excavation for foundation in Hard stiffclay, stiff black cotton, hard red earth, shales murram,gravel,stoney earth and earth mixed with small sizeboulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil,sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete 10 cum. The Rate inclusive of all charges such as Earth work and remove the same away from the site etc, complete as per standard specifications.

Sand filling for fountations & basement in layers of not more than15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plaint Cement concrete 1:4:8 (one cement four sand and eight aggregates) Using 40mm gauge hard broken granite jelly for foundation inc. consolidation and dewatering for foundation wherever necessary etc.complete.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Brick work in CM 1:3 (one cement & five sand) using III class country bricks of size 8 3/4"X41/4"X 2 1/4 " including finishing, curing, etc., complete complyingwith standard specification - 100CFT (For foundation & basement)

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X23/4" including finishing, curing, etc.,complete complying with standard specification - 100CFT (For G.F.)

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides) Si No.82

Supplying, erecting with necessary supports for plain surface such as RCC Boxing side slab and silmilar RCC slab with all cross bracing etc., complete in all floors of any height ( the retrived materials ) should be taken back by the contractor the payment for cenetering shall be given after the concrete is laid ( Vertical portion ) 10m² etc., complete..Si No.325

Supplying, erecting STEEL CENTERING for sides andsoffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualarbeams tee or el beams lintels , bed blocks staircase inall floors of any height (the retrived materials should be taken back by the contractor) the payment forcenetering shall be given by the concrete is laid .SI No.307

Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in F&B

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also). Below 16mm Dia

Plastering with CM1:5 (one cement and five sand) 12mm thick10m2. SI.NO.27

Plastering with CM1:3 (one cement and three sand) 10mm thick10m2.SI.NO.51

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supply andand Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangemets using 20mm squre MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles,plates,sheets,fabrication charges, cost of hold fast and transportation charges etc.,complete Fully Panelled Double Leaf-Door Size- (1.00m x 2.10 m)

Fully Panelled Single Leaf-Door Size- (0.90m x 2.10 m)

Fully panelled Double leaf - Window (without Ventilator) (1.20m x 0.90 m)

Wiring with 2x1.50 sq.mm PVC unheated SC Aluminium cable of 1100 V grade in suitable PVC rigid pipes in wall or ceiling with PVC accessories with TW switch box in flush with wall covered by hylum sheet3mm thick and painting with suitable colour of 14 SWG TC wire for light point.

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set TWAD-DATA-P- 56" Ceiling Fan High Speed (Without regulator) Higher End Each

Supply and Fixing for 20W 4 Feet LED fitting with LED including labour Charges Etc Complete

White washing two coats with best lime stone including gum and cungee water etc. complete 10m2 SI No.338 rate for 10m2.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat , including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc,complete as per standard specification. - 10 sq.m

Add GST 18%

S SANJAY GANDHI (BID ID -1416783)