REPAIR TO LEAKAGE/SEEPAGE IN ROOF, CHAJJA, BALCONIES, PLUMBING ETC AND CERTAIN B/R WORKS, REPAIRS TO JOINERY AND ALLIED WORKS AT OMQ AND 10 AFH AND REPAIR/REPLACEMENT OF STREET LIGHT IN LIVING OUT AREA OF OMQ AND KV AREA UNDER GE (AF) HASIMARA

Amount

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Refixing shutters of any description exc 1 sqm but n.exc 2 sqm each in the same opening after necessary repair complete as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

Demolition of un-reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 including provision of 2 Nos 8mm dia, TMT bar at every fourth course complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 5 mm thick on fair faces of brick work or concrete surfaces as in ceiling (sunshade, chajja etc) in cement mortar 1:3, and finished the surface even and smooth without using extra cement complete all as specified and directed.

Cleaning the surface of sunken floor by using brush, brooming and washing down with water to remove dust and brushing with neat cement slurry @ 0.50 kg/sqm with acrylic based polymer modified cemented composite (Pidifine 2 K) @ 0.50 kg/sqm complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:3, mixed with liquid water proofing compound by weight of cement as per manufacturer's instructions as in sunken floor complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for plain cement concrete 1:5:10, type E-2 (using 40mm graded stone aggregate) as in sunken floor complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sunken floor complete all as specified and directed.

Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet used instead of plain colour PVC sheets. Stile and rails, feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel ventilators, with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F Steel ventilators, fixed type with glazing bars complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties,flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick, figured glass, pin headed type, in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm/350mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of flooring etc, finishing cement concrete surface even and fair without using extra cement complete all as specified and directed.

M & L for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in roof kerb or mud stop, rounded or chamfered on edges incuding necessary form works etc complete all as specified and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer's instruction including dismantling of unserviceable sheets complete all as specified and directed.

S & F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws as per manufacturer's instruction including dismantling of unserviceable sheets complete all as specified and directed.

S & F 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 including dismantling of unserviceable sheets complete all as specified and directed.

M & L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F in repair aluminium anodised snap grid frame work of size 605mm x 605mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC, designer fixed to frame complete all as specified and directed by the Engr-in-Charge.

M & L for preparing old decorated surfaces of walls, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed.

M & L for preparing old decorated surfaces of ceiling, etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed.

M & L for preparing old decorated surfaces of walls, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of white wash complete all as specified and directed.

M & L for preparing old decorated surfaces of ceiling, etc by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of white wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer complete all as specified and directed.

M & L for preparation old decorated external surfaces of wall, chajja, facia etc after complete removal of existing treatment and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparing old decorated surfaces of wall/chajja, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of cement base paint complete all as specified and directed.

M & L for Complete removal of existing treatment from walls including preparation of surface complete all as specified and directed.

M & L for applying one or more coat of wall care putty to achieve a smooth surface after preparation of surface complete all as specified and directed.

M & L for preparing old decorated surfaces of wall, etc including cornices by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparing old decorated surfaces of ceiling, etc including bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparing newly plastered surfaces of ceiling etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

M & L for Preparation of newly steel & iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description, not otherwise described, n. exc.10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and directed.

M & L for Preparation of newly wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old painted wood and wood based surfaces of any description, n. exc. 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M & L Water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed:- (a) Taking down existing old tarfelt, bituminous compound including cleaning, picking, sweeping and washing down with water and brushing with neat cement slurry & 3 Kg per Sqm & removing debris to a distance exc 100m & n.exc.250m. (b) 15 mm thick plastering in cement mortar 1:3 mixed with water proofing compound (to be measured seperately) as per manufacturer instructions finished even & smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 300 ml per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm

M & L for Cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S & F TMT steel bars 10mm dia and over, and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F TMT steel bars 6mm to 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M & L for use & waste form work to fins, louvers, fascia and the like including edges for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste form work to chullah hoods, chajjas, troughs and similar items including edges for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (Using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed. (Note : Reinforcement shall be measured & paid seperately)

Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 74 above)

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

S & F 15mm bore, concealed Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors and making good surfaces with cement morter 1:3 exc 10 cm girth, complete all as specified and directed.

M & L for 15mm bore, Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning for re-fixing or removing from site, complete all as specied and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 79 above)

S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed.

S & F in repairs, Vitreous China wash basin, white, flat back , of size 550 x 400 mm excluding taps but including CP waste coupling, chain, plug & porcelain stopper, bracket complete all as specified and directed.

Fixing only in repairs, Vitreous China wash basin, flat back or angle back type, any size, including cutting and pinning ends of brackets or erecting stand complete all as specified and directed.

S & F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including 20mm nipple suitable for tank and 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) after taking down old unserviceable one as specified in SSR Part I and directed.

S & F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including 20mm nipple suitable for tank and 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) after taking down old unserviceable one as specified in SSR Part I and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capapcity exc 500 & n.exc 1000 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in position including writing date of cleaning with white synthetic enamel paint as "CLEANDED ON" complete all as specified and directed.

S & F PTMT Nipple, 20mm, suitable for HDPE water tank. (Minimum weight 20mm-45gms) complete all as specified and directed.

S & F in repairs, 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

S & F in repair PVC over head tank cover suitable for 500/1000 Litres capacity tank complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs, 32mm dia flexible PVC waste pipe for wash basin/sink etc complete all as specified and directed

S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

Fixing only in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, 15mm bore, bib taps of PTMT, any colour high pressure, screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S & F in repair 125 mm Swivel shower rose of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed.

S & F in repair 15 mm bore, two way angular stop cock, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repair 15 mm bore, health faucet ABS body with wall hook and 1 m long SS braided rubber hose pipe with all accessories complete all as specified and directed.

S & F in repairs, plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs, Toilet paper holder, stainless steel fixed to wall with screw complete all as specified and directed.

Dismantling cast iron, PVC or reinforced concrete drain pipes, etc upto 110mm bore, with fittings jointed in cement mortar and taking out of trenches, floor or walls if required complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

S & F 75 mm bore, PVC (SWR), Soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with access door complete all as specified and directed.

S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repair 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S & F in repair 20 mm bore, gun metal globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and directed.

Removal of vegetation/grass etc including Cutting holes into or through brick walls/concrete and removal of small trees/woods etc and making good disturbed surfaces with cement concrete 1:2:4, type B-0 (Using 12.5mm graded aggregate) complete all as specified and directed.

Cleaning/Uprooting of vegetation/small trees, muds, garbages, waste etc growth on inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet, valley gutter and shaft portion of wall surfaces, back side of toilet portion and above chajja portion etc complete all as specified and directed.

M & L for repair to broken/damaged RCC chajja by making good with PCC 1:2:4, type B-1 (using 20mm graded aggregate) or with cement mortar 1:3, rendering 15mm thick in cement mortar 1:4 mixed with and including water proofing compound as per manufacturer's instructions to top and sides of chajja including necessary form work including demolition of loose PCC complete all as specified and directed.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Dismantling unframed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

Taking down steel window/ventilators shutter of any size and description and refixed in the same opening after minor repairs/welding and necessary minor accessories as required complete all as directed. (Note: Box type hinge, stay, handle etc shall be measured and paid sperately as supply only)

Supply only mild steel handle for steel window for left/right shutter complete all as specified and directed.

Supply only mild steel peg stay including nuts & bolts etc suitable for steel window and ventilator complete all as specified and directed.

Supply only mild steel box type hinge suitable for steel window and ventilator complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M & L in repair for 6mm thick Cover fillets of tempered hard board, 50mm wide and fixing with screws in ceiling flat or sloping complete all as specified and directed.

M & L in repair 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S & F in repair PVC insulation panels 7 to 8mm thick with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S & F 150mm width & 12mm thick, designer gypsum cornice alongwith the perimeter of room complete all as specified and directed.

M & L for Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for Pressed steel frames 75mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F Factory made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side having one side feathered edge and other side 10mm, 90 degree bent edge & as gap insert for top rail & bottom rail, panel shall be of wire gauzed, The wire gauzed shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tube, the wire gauge shall be stretched to tighten firmly complete as per specification and drawing and as directed.

S & F 40 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick, factory made, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a).

S & F 150 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S & F 100mm, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F 75mm, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours and 50mm MS butt hinges; articles n exc 200 cu. cm each complete all as specified and directed.

S & F in repair fancy type stainless steel magic eye for doors complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

S & F 18mm thick, prelaminated wooden finish, PVC celuka board for shelves of cupboard etc including all necessary accessories and builders hardware, complete all as specified and directed.

S & F 12mm thick, prelaminated wooden finish, PVC celuka board for shelves of cupboard etc including all necessary accessories and builder hardware, complete all as specified and directed.

M & L for Extra over rates of block board or veneered particle board(18/19mm thick) for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

M & L for Extra over rates of block board or veneered particle board(12mm thick) for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.

S & F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F Brass knobs 35-40mm dia, complete all as specified and directed.

S & F mild steel continuous piano hinges, bright finishes, width of flaps 30mm(when open) complete all as specified and directed.

S & F 125 mm size, D shaped handles, stainless steel complete all as specified and directed.

S & F Internal, auto closing, concealed aluminium hinge (dia of hinge 35 mm, cup hole distance 48mm for 18-22 mm thick door), complete all as specified and directed.

S & F good quality stainless steel, telescopic channel set for drawer of grocery basket, heavy duty drawer, multi-tech high capacity, 500mm long (min) for cutlery plain and thali basket, complete all as specified and directed.

S & F magnetic push type glass door closer fixed with glass shutter of cup board complete all as specified and directed.

S & F in repair 20 mm dia, curtain rod mild steel chromium plated decorative type, complete all as specified and directed.

S & F in repair mild steel chromium plated bracket for curtain of 20 mm dia, fancy type fixed to wall fixed type, complete all as specified and directed.

S & F in repairs, 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.

S & F in repair Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed.

M & L for Makrana Adanga Marble work 16 to18mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm.)

S & F Anodised aluminium door shutters, powder coating of any colour (Thickness or powder coating not less than 50 micron)aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 5mm thick Aluminium Composite Panel (ACP) sheet fixed in aluminium door in panels, exc 0.50 sqm in each panel, with rubber beading complete all as specified and directed.

S&F Aluminium Mortice lock with 4 lever, vertical type, size 75 mm complete all as specified and directed.

S & F 5.5 mm thick, tinted sheet glass, ordinary quality and glazing with neoprene rubber beading for aluminium door/window etc in square not exceeding 0.5 Sqm in each pane with Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed.

S & F 5.5 mm thick, tinted sheet glass, ordinary quality and glazing with neoprene rubber beading for aluminium door/window etc in square exceeding 0.5 Sqm and n.exc 1Sqm in each pane complete all as specified and directed.

S & F in repairs, Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

Taking down steel rolling shutter n. exc 7 sqm, of any description and refixing in the same opening after necessary repair work to existing shutter by welding in position, oiling, greasing of rollers including replacement of minor accessories to make shutter smooth functioning/movement complete all as directed by the Engr-in-Charge.

Supply only ball bearing for rolling shutter, suitable for 32 to 40mm suspention shaft complete all as specified and directed.

Supply only tension spring for rolling shutter, suitable for 32 to 40mm suspention shaft complete all as specified and directed.

Supply only 40mm, mild steel pipe, heavy duty for shaft of rolling shutters, complete all as specified and directed.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S & F in repair,1mm thick lath, Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S & F Energy efficient LED Street / Roadway Luminaire, high PF, 45W, energy saving and environmental friendly long life versatile pressure die cast aluminium housing IP 66 protection, 240V, complete using 4 Sqmm, PVC insulated (unsheathed) two core armoured cable, 1100V grade with aluminium conductor (upto 8.0 RM), from junction box to light fittings, suitable size of clamps- 03 Nos, nuts, bolts and washers and testing including taking down old unserviceable light fittings complete all as specified and directed. (Make:Surya Cat Part No SLEUL45WIP66 LXN or equivalent of Philips, C&S CP No LTESSI45WLED).

S & F Energy efficient LED Flood light Luminaire, high PF, 60W, energy saving and environmental friendly long life versatile pressure die cast housing IP 66 protection, 240V, complete using 4 Sqmm, PVC insulated (Unsheathed) two core armoured cable, 1100V grade with aluminium conductor (Upto 3.0 RM), from junction box to light fitting, suitable size of clamps- 03 Nos, nuts, bolts and washers and testing including taking down old unserviceable light fittings complete all as specified and directed. (Make: SURYA Cat Part No SLEFL60WLUMOS or equivalent of Philips, C&S CP No LTEF80WHPLED).

S & F Energy efficient LED flood light Luminaire, high PF,120W, energy saving and environmental friendly long life versatile pressure die cast aluminium IP 65 protection, 240V, complete with pre-wired using 1.5 Sqmm, FRLS PVC insulated (Unsheathed) three core cable, 1100V grade with multistranded copper conductor (upto 8.0 RM), from junction box to light fitting and testing including taking down old unserviceable light fittings complete all as specified and directed. (Make: SURYACat Part No SLEFL120W IP 66LUMOS or equivalent of Philips, C&S CP No LTEF120WHPLED).

S & F Energy efficient LED flood light Luminaire, high PF,100W, energy saving and environmental friendly long life versatile pressure die cast aluminium IP 65 protection, 240V, complete with pre-wired using 1.5 Sqmm, FRLS PVC insulated (unsheathed) three core cable, 1100V grade with multistranded copper conductor (Upto 8.0 RM), from junction box to light fitting and testing including taking down old unserviceable light fittings complete all as specified and directed. (Make: SURYACat Part No SLEFL100W IP 66LUMOS or equivalent of Philips, C&S CP No LTEF100WHPLED).

S & F post top, 35 W LED lamp, opal diffuser with spigot made up of cast aluminium and wired with all accessories, 240V, complete , pre-wired using 1.5 Sqmm, FRLS PVC insulated (unsheathed) three core cable, 1100V grade with multistranded copper conductor (upto 5.0 RM), from junction box to light fitting and testing including taking down old unserviceable light fittings complete all as specified and directed. (Make: Havells Cat Part No VICTORIAPT35WLED730PSYMTOTG or equivalent model of make as specified in list of manufacturer).

S & F post top, 12W LED lamp, opal diffuser with spigot made up of cast aluminium and wired with all accessories, 240V, complete with LED lamp 12 W, Holder, pre-wired using 1.5 Sqmm, FRLS PVC insulated (Unsheathed) three core cable, 1100V grade with multistranded copper conductor (Upto 5.0 RM), from junction box to light fitting and testing including taking down old unserviceable light fittings complete all as specified and directed. (Make: Surya Cat Part No SPM 18 CF OP or equivalent of Philips, C&S, Havells)

S & F in repair Street light bracket arm of length not less than 1.2 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

S & F PVC weather proof, hinged door, junction box with, 240V, Neutral link and 1No MCB SP of 6 Amps, including necessary fixing arrangement such as clamps, nut, bolts, etc after dismantling of old unserviceable junction box complete all as specified and directed. (Make : Sintex, Cat No. GSJB 2014 or equivalent make of Hensel)

M & L in repair Semi integrated 18 W LED, solar street light, with inbuilt Li-PO4 Battery, automatic dusk to dawn operation, high efficient charge controller, battery over charging and deep discharge protection, LED driver efficiency >92%, indication for battery charging, lumen output not less than 120 Lm per watt complete all as specified and directed. (Make: Vision Solar, Systeller, Starline)

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 Sqmm 2 core including taking out old one complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)

All as per serial item No. 195 above but for 10 Sqmm 2 core cable complete all as specified and directed.

All as per serial item No. 195 above but for 16 Sqmm 2 core cable complete all as specified and directed.

Supply and laying 50mm dia, High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches for cable protection at road crossing etc including making good the disturbed surface or fixing on wall / poles of any type, secured with clamps complete all as specified and as directed.

M & L for steel tubular swaged poles, 8.5 mtr long 410 SP-22 with MS base plate of 6mm thick of size 450mm x 450mm, finial taper plug pole cap, bolts, nut and screw, pole made out of ERW MS tubing confirming to IS 2713 Part II, of swan neck type including drilling of holes of required size and nos for fixing of cross arms bracing support/ taking out of cables etc, with inbuilt junction box for 3 phase 4 wire AC supply and painting with one coat of red oxide primer over two coats of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concrete complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, (Below or above ground level) and disposal of debris and rubbish to a distance n.exc 100m complete all as directed by the Engr-in-Charge

M & L for Plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed.

M & L for plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in benching, coping, bed plate, lintel upto 1.5m span cast in situ including necessary form work complete all as specified and directed.

S & F LED aviation light fitting with comprising of aluminium housing with polycarbonate enclosure, with 302 Nos LED, IP 66 protection complete all as specified and directed. (Make - Bajaj CP No BGAV 302 LED or equivalent of Surya/ Havells/ Philips). Note: An amount of Rs. 47923.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S SARDAR MAL NAHATA

M/S. NARENDRA KUMAR GARG

SHRI SURAJIT SIKDER

JOGINDER KUMAR GOYEL

M/S BIJAY KUMAR SHIVA

M/S RATHIN ENTERPRISES

SHRI D P AGARWAL