ADDN/ALTERATION TO OR LIVING LINES OF HQ ENGR BDE CAMP AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH

Amount

M&L for fly ash brick old size straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate as in chajjas complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

All as per item No 04.00 mentioned above but in columns, complete all as specified and as directed.

All as per item No 04.00 mentioned above but in slabs supported on walls, beams and columns, in roofs and in shelves and the like, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed.

All as per item No 7.00 mentioned above but for columns for fair finishes, complete all as specified and as directed.

All as per item No 7.00 mentioned above but for sides and soffits of beams and lintels, complete all as specified and as directed.

All as per item No 7.00 mentioned above but for soffits of slab, complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished surface of concreted complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for fair finished surface of concrete complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick (in two layer) on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in CM (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth on walls in CM (1:4) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for two coats of oil bound distemper over a coat of alkali resistant primer including preparion of new plastered surfaces of walls over a coat of 3mm thick wall care putty complete all as specified and directed. Make: Asian Tractor/Berger Bison/Shalimar Premium Acrylic

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer including preparion of old plastered surfaces of walls complete all as specified and directed. Make: Asian Tractor/Berger Bison/Shalimar Premium Acrylic

M&L for preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

M&L for complete removal of existing surface preparation of old plastered surface of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

Mild steel TMT bars 10 mm dia & over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 21.00 mentioned above but 5 mm to 10 mm dia, as in stripps, spacers complete all as specified and directed

Dismantling of framed work timber scantlings 40 sqcm and over in section, in any position fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W(Gde- E-250) quality-B complete all as specified and directed.

M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed

Dismantling (corrugated, semi corrugated) sheet in roof covering complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating @ 150 GSM GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws complete all as specified and directed.

Taking down window chowkhats or frame n.exc 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative panelled decorative flush door shutter one side plain on other side of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk Stainless steel screws, all as per direction of Engineer-In-Charge. (Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately)

S&F factory made single extruded WPC (Wood Polymer Composite) wire gauzed i.e. panel will be wire mesh in lieu WPC, the wire gauze shall be warped on additional square 8mm MS Solid tube and this tube shall be welded to MS frame complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at nctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.Pbrass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all.complete as per architectural drawings and the directions of Engr-in-Charge.

S&F 4mm thick figured sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed

S&F butt hinges, extruded alluminium, with mild steel hinge pin, bright polished and fixed, type 100 mm size B21 complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed

S&F Aluminium alloy, anodised, 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for PCC (1:3:6) type C1 as in bed blocks for hold fast including necesssary formwork complete all as specified and directed

Demolition of cement concrete as in ground floors and pavings n.exc 15 cm thick below or above ground level (unreinforced) complete all as specified and directed.

M&L for cement concrete 75mm thick 1:4:8, Type D-2 (using 40 mm graded stone aggregates) as in sub base for flooring etc complete all as specified and directed.

M&L for 25 mm cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) 40 mm thick as in receiving floor finished complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of floor hearth or wall tiling incl cement martar bedding complete all as specified and directed (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

S&F Anodised aluminium snap grid 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc including dismantling wall and ceiling boards (firbre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.

S&F for 6 mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-1 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement, incl making joints 10mm wide to the full depth of PCC at every 3 meters and at every change of direction and complete all as specified and directed.

M&L for cement concrete 1:3:6, Type C-2 (using 20 mm graded stone aggregates) in surface channlels and drains complete all as specified and directed

M&L for hardcore of broken stone of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation and all as specified and directed.

S&F Drapery rod (conduit) of dia not less than 25 mm having a corrugated virgin PVC extrusion on it & finials of approved shade with standard MS powder coated/ brackets, fixed to walls with rawl plugs and steel screws complete all as specified and directed

M&L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following typesnt with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick Screed bed or backing coat for laying floor finishes in CM (1:6) complete all as specified and directed.

Demolition of cement concrete as in ground floors and pavings n.exc 15 cm thick below or above ground level (unreinforced) complete all as specified and directed.

M&L for cement concrete 75mm thick 1:4:8, Type D-2 (using 40 mm graded stone aggregates) as in sub base for flooring etc complete all as specified and directed.

M&L for cement concrete type B1 (1:2:4) using 20mm graded aggregate 40 mm thick as in floor complete all as specified and directed.

M&L for Chequered Cement concrete pre-polished coloured tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM (1:6) with grey cement and pigment complete all as specified and directed

M&L for PCC (1:3:6) type B1 as in kerbs incl necessary form work (cast in situ) etc complete all as specified and directed

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed

All as per item No 63.00 mentioned above but depth exc 1.5m and n.exc 3.0m, complete all as specified and as directed.

M&L for 400mm thick mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (i.e. 10% fly ash, 30% clinker and 60% stone dust) laying in layers n. exc 30cm thick watering, ramming and compacted with vibratory/power roller 8 to 12 ton to required camber and gradient, complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, all as specified and as directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, all as specified and as directed.

M&L for rendering 5mm thick on fair faces of ceiling/ chajja concrete surface in CM (1:3) complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered Ceiling surfaces and applying three coat of white wash complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing, all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, all as specified and as directed.

S&F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

M&L for glazed ceramic colour joint free tiles in vertical surface 350x250x7mm thick set and jointed in neat cement slurry over 10mm thick 1:4 cement mortar plaster and pointed in coloured cement to match complete all as specified and as directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 25mm thick as in floors for receiving screed bed of floor tiling complete all as specified and as directed.

S&F for 3mm thick figured glass, pin headed type, and glazing with oil putty in square n.exc 0.5 sqm in each plane, all as specified and as directed

S&F Stop valves 15mm dia CP fancy type, screwed down high presure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supplying and laying of CPVC pipes 20mm bore SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including plain/brass threaded fittings complete all as specified and as directed.

M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and as directed.

S&F vitreous China wash basin white flat back size 580x450 mm including cutting for pinning in ends of brackets, complete all as specified and as directed.

S&F CP Swivel shower & arm 15mm size, 195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm), complete all as specified and as directed.

S&F 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure with or without lettered 'HOT' or 'COLD' with long screwed sunk and fly nuts complete all as specified and as directed.

S&F CP Bib taps 15 mm dia with fancy handle, screwed down, screwed for iron pipe or for brass ferrule, fancy type and fixed complete all as specified and as directed.

S&F wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polyethylene of low or density of PVC 32 mm dia for low level flushing cistern, complete all as specified and as directed.

S&F Glass shelf assembly below WHB fixed SS screws of 450mm long complete all as specified and as directed.

S&F 10 litre capacity two way flush PVC low level flushing cistern with all accessories complete fixed with WC including syphon pipe, PVC flushing pipe of size complete all as specified and as directed.

S&F Health faucet (ABS body) mild steel chromium plated, suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60 cm long between flanges complete all as specified and as directed.

M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge (Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height.

M&L for liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats, (Minumum weight 105gms) complete all as specified and as directed.

M&L for 10mm thick in cement plaster CM 1:4 on brick or concrete surfaces finished even and fair without using extra cement and using water proofing compound, all as specified and as directed.

S&F PVC connection pipe 15mm size & 600 mm long with chromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and as directed.

M&L for Plain cement concrete type C2 1:3:6 (usinh 40 mm graded stone aggregate) as in foundation and mass filling complete all as specified and as directed.

M&L for brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius built in CM 1:4, all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping, benching, haunching etc, finished even and smooth complete all as specified and as directed.

M&L for PCC 1:3:6 Type C2 Concrete bed to drain pipes 160mm bore including packing under,and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

S&F UPVC Eco Drain pipe drainage sewer system pipe bearing 160mm dia minimum 4mm thick including jointing with coupler, bend, tee as per site requirement complete laid in trenches or floors complete all as specified and as directed. Note : PCC haunching will be measured and paid seperately.

M&L RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in precast manhole cover slabs set in CM (1:6) complete all as specified and as directed.

Cutting into existing manholes for connecting new drains 160mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and as directed.

E/M PORTION Taking down carefully aluminium conductor point wiring (light, fan, socket or powr) complete including fittings such as switches, ceiling rose, pendents, regulators sockets etc and removing (except those to be reused shall be kept in safe custody at the site) andmaking good disturbed surfaces of walls, floors etc tomatch with the existing completeall as specified and directed.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface) Make :Plaza/Polycab/Havells

All as per item No 106.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed.

All as per item No 106.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.

M&L for wiring for socket outlet on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor, PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, single pole, 5/6 Amps, one way complete all as specified and directed.

S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed.

S&F socket outlets 2 in 1, 5 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed.

S&F switch socket combination 5 in 1, 6 pin, (5/16 Amps) flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F type electronic fan regulator flush type 240 Volts, 120 watt, ISI marked complete all as specified and directed.

S&F lamp holder, PVC/polycarbomate type with back plate straoght of angle suitable for LED lamp complete all as specified and directed

S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification)

S&F submain two single core 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed. (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necessary chasing, cutting and making good as per existing specification)

S&F wall LED security light fittings 35 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed.

S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative boxype 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed. Make : Bajaj/Havells/Jaquar/CG

S&F recessed mounted 2' x 2' LED lminaire 36 watt for grid ceiling minimum lumen output 100 lumen/watt pre-treated CRCA frame powder coated with difused profied including necessary connection complete all as specified and directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 8 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider

S&F MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. Make :Havells/ABB/Legrand.

S&F MCB SPN 6-32 Amps, 'C' series 10 kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. Make :Havells/ABB/Legrand.

S&F MCB SP 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. Make :Havells/ABB/Legrand.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

S&F D clamp of strip size 25x6 mm with suitable washer,nuts, bolts in any shape or size as indicated or directed including making hook for hanging ceiling fan and inclusive of one primer coat ,one under coat, one finish coat of paint complete for hanging of ceiling fan all as specified and as directed.

M&L for taking down of ceiling fans of any sweep and transportation to work shop including dismantling for repair/overhauling, oiling, greasing, vernishing including replacement of unserviceable accessories like capacitor, connector etc. After repair re-assembling fan, testing for efficient functioning including hanging it back in position and provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan, complete all as specified and as directed by Engr-in-Charge.

M&L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as specified and as directed by Engr-in-Charge.

S&F LED battern mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed. Make : CC/Crompton/ Havells/Jaguar/Bajaj

S&F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and directed.

S&F electric water heater, storage type seel boby with copper inner tank and heating element upto 2KW capacity 25 Ltrs, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.

S&F Pipes galvanized, 25 mm bore “Medium grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified complete all as specified and directed..

S&F gun metal, gate valve, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.

S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks minimum three layer (Cylindrical, vertical with closed top) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engr-in- Charge Make: Sintex/Vectus/Prayag

S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 20 mm dia with fly nut complete all as specified and directed.

M&L for cutting existing steel tubing for alternation or addition of size 40 to 50 mm dia GI pipe complete all as specified and directed.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed Make :Havells/ABB/Legrand.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmmx2core laying properly in treanche all as directed by Engr-in-charge Make: Havells/Polycab/KEI.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmmx2core laying properly in treanche all as directed by Engr-in-Charge Make: Havells/Polycab/KEI.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and as directed.

S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc. complete all as specified and as directed.

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

S.P.S. SUPPLIERS

ANIMA ENTERPRISE

UNIQUE ENTERPRISE

ROY ENTERPRISE

BISWAS ENTERPRISE

M/S SEHGAL CONSTRUCTION

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION