Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹33.7 LAccepted-AOC | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹42.5 L+₹6.1 L (16.9%)Rejected-AOC 201 GANAPATI SANKUL AGASHIVNAGAR MALKAPUR KARAD SATARA MAHARASHTRA 415539 | SATARA | MAHARASHTRA | 415539 | 2 | Rejected-AOC OTHER THAN L1 BIDDER | |
| 3 | 3₹42.7 L+₹6.4 L (17.5%)Rejected-AOC | 3 | Rejected-AOC OTHER THAN L1 BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
14 Apr 2020, 6:00 pmClosed
GE SATWARI
GE SATWARI
Comprehensive Maint of Internal Electrification, Ceiling fan, exhaust fan, re-wiring and allied works at Y Stn, Digiana, BWR, Ridge area under GE Satwari
2020_MES_334280_1
GEJM-13/20-21
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE SATWARI
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹500
GE SATWARI
₹80,000
Yes
1 May 2020
17 Mar 2020
16 Apr 2020
17 Mar 2020
14 Apr 2020
31 Mar 2020
Amount
Receiving/recording complaints lodged by the occupants of all Md accn including MAP Qtrs at 'Y' Stn and defence colony under GE Satwari of electrification nature, rectification of the fault / complaints as per the complaint lodged by the user or as given by MES onward KWH meter in respect of main distribution board having switch fuses, MCB distribution board in sheet metal enclosure, point wiring, fixture for light/ Fan/bell/light or power sockets complete repairs to the extent by removing connections from the system, removing faults in wires, batten, conduit, sunk boxes, junction boxes, main switches, MCBs/DBs utility light fittings, FTL light fitting any wattage lamp, holders, AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as insulation wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tape, screws, nuts as required to rectify the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engineer-in-Charge/users.
NOTE: (i) The new items provided shall be measured and paid for separately under relevant items of Sch ‘A’. (ii) If contractor fails to attend the complaints in reasonable time a recovery of Rs 300 shall recovered per complaint. (iii) Contractor shall employee minimum of two electrician and two helper having adequate experience with ITI certification course in the said field.
Receiving/recording complaints lodged by the occupants of all Md Accn of BWR area and ridge area under GE Satwari of electrification nature, rectification of the fault / complaints as per the complaint lodged by the user or as given by MES onward KWH meter in respect of main distribution board having switch fuses, MCB distribution board in sheet metal enclosure, point wiring, fixture for light/ Fan/bell/light or power sockets complete repairs to the extent by removing connections from the system, removing faults in wires, batten, conduit, sunk boxes, junction boxes, main switches, MCBs/DBs utility light fittings, FTL light fitting any wattage lamp, holders, AC ceiling/exhaust fans and other connected fixtures of the internal electrification including providing of petty stores such as insulation wires of appropriate size and conductor matching to existing one upto the length of 1 mtr including insulation tape, screws, nuts as required to rectify the fault with regard to the complaint lodged and refixing of fittings, fixture to their position as dismantled complete all as directed at site to the entire satisfaction of Engineer-in-Charge/users.
NOTE: (i) The new items provided shall be measured and paid for separately under relevant items of Sch ‘A’. (ii) If contractor fails to attend the complaints in reasonable time a recovery of Rs 300 shall recovered per complaint. (iii) Contractor shall employee minimum of two electrician and two helper having adequate experience with ITI certification course in the said field.
Supply only in replacement of switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V. Make: Anchor PC Penta or Havells Reo/Legrand
Supply only in replacement of switch piano modular made of polycarbonate flush button single pole single module , 6 Amps, 240 V. Make: Elvira Indoasian or equivalent in Havells, Legrand.
Supply only in replacement Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V . Make: Anchor PC Penta or equivalent in Havells Reo, Legrand
Supply only in replacement Switch piano Modular made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V . Make: Elvira Indoasian or equivalent in Havells, Legrand.
Supply only in replacement Switch piano made of Polycarbonate flush button single pole two way 6 Amps, 240 V.Make: Anchor PC Penta or equivalent in Havells Reo,Legrand.
Supply only in replacement Switch piano Modular made of polycarbonate flush button single pole two way, 6 Amps, 240 V . Make: Elvira Indoasian or equivalent in Havells, Legrand.
Supply only in replacement Bell push made of polycarbonate piano flush type 6 amps, 240 V. Make: Anchor PC Penta or equivalent in Havells Reo, Legrand.
Supply only in replacement Bell push modular made of polycarbonate piano flush type 6 amps , 240 V. Make: Elvira Indoasian or equivalent in Havells, Legrand.
Supply only in replacement Ding Dong door belL,AC 230 volts Single Phase.
Supply only in replacement Buzzer, AC 230 volts Single Phase.
Supply only in replacement Socket outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed. Make: Anchor PC Penta or equivalent in Havells Reo,Legrand
Supply only in replacement Socket outlet Modular 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed. Make: Elvira Indoasian or equivalent in Havells, Legrand.
Supply only in replacement Switch socket combination 2-in-1 5 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed. Make: Anchor PC Penta or equivalent in Havells Reo,Legrand
Supply only in replacement Socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed. Make: Anchor PC Penta or Havells Reo, REO.
Supply only in replacement Socket outlet Modular 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed. Make: Elvira Indoasian or equivalent in Havells, Legrand.
Supply only in replacement Switch socket combination 5 in 1, 6 and 16 Amps flush type made of polycarbonate universal controlled by one switch. Make: Anchor PC Penta or equivalent in Havells Reo,Legrand
Supply only in replacement Fan regulator 2 Module stepped type (electronic ) made of polycarbonate for 1200/1400mm sweep AC ceiling fan.Make: Anchor PC Penta or equivalent in Havells Reo,Legrand
Supply only in replacement Modular type Fan regulator 2 Module stepped type (electronic ) made of polycarbonate for 1200/1400mm sweep AC ceiling fan.Make: Elvira Indoasian or equivalent in Havells, Legrand.
Supply only in replacement LED tubelight fitting 18-20 W LED, 230V, Box type complete in all respect . Cat part No DMLN1LT8-16 of Crompton or Cat Part Nio WIO921208 of Wipro alongwith LED tubeRod Polycarbonate with superior aesthetic anmd heat dissipation capability suitable for G-13 base tube lights base fluorescent T8/T12 luminaries, 18-20 watt LED wattage with colour temp of 6000 K 1800 lumens and with surge arrestor complete in all respect. Cat Part No LTT8-20 of Crompton or LL13-181-650 of Wipro or equivalent in Jaquar . Note:- The LED batten and LED tube rod shall be of same make.
Supply only in replacement LED wall mounted tube fitting 10W LED for mirror complete fitting Make: Havells Cat Part No LHEXBTP7IN1W009 or equivalent in Jaquar/Crompton/Wipro.
Supply only in replacement energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalant in Crompton/ Philips/ Wipro
Supply only in replacement lamp holder, PVC/Polycarbonate type with back plate for batten fitting.
Supply only in replacement Capacitor 2.5 mfd, 220 volts AC, 50 Hz all as specified and as directed by the Engr-in-charge
Supply only in replacement Capacitor 3.15 mfd, 220 volts AC, 50 Hz all as specified and as directed by the Engr-in-charge
Supply and fixing in replacement MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL
Supply and fixing in replacement MCB SPN complete 40 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/ C&S Electric/HPL
Supply and fixing in replacement MCB SPN complete 63 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL
Supply and fixing in replacement single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL
Supply only in replacement 9'' x 5'' size Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed.
Supply only in replacement 5'' x 5'' size Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed.
Supply only in replacement 12'' x 10'' size Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed.
Supply only in replacement Laminated sheet cover hylam brand ISI marked 3mm thick round sheet for fixing on junction boxes as required at site incl suitable size screws - 01 Nos complete all as specified and directed.
Supply only in replacement Choke electronic ballast in ABS housing with lead in wires suitable for FTL fitting 1x36 watt 240 volts.Make : Havells/Crompton/Anchor/Surya.
Supply only in replacement FTL lamps 36 (Rod) watt suitable for FTL 1 x 36 watt fitting Make: Havells/Bajaj/Surya/Crompton
Supply only in replacement wire of size 1.5 Sqmm with PVC insulated FRLSH multistranded copper conductor for working Voltage 1100 Volts.
Supply only in replacement wire of size 2.5 Sqmm with PVC insulated FRLSH multistranded copper conductor for working Voltage 1100 Volts.
Supply only in replacement wire of size 4 Sqmm with PVC insulated FRLSH multistranded copper conductor for working Voltage 1100 Volts.
Supply only in replacement wire of size 6 Sqmm with PVC insulated FRLSH multistranded copper conductor for working Voltage 1100 Volts.
Supply only in replacement PVC gang box suitable for 6 Amp Socket and 6 amp switch.
Supply only in replacement PVC gang box suitable for 16 Amp Socket and 16 amp switch.
Supply only in replacement PVC enclosure suitable for MCB complete all as specified and directed,Make: Anchor/Indoasian/HPL.
Supply only in replacement PVC casing and caping ISI marked of size 20mm.
Supply only in replacement PVC casing and caping ISI marked of size 25mm.
Supply only in replacement LED tubelight fitting with aluminium heat sink and polycarbonate diffuser with high efficacy suitable for installation in existing T5 tube light with G5 lamp holders to give glare free light 18 watt along with LED driver. Make : cropmton cat part No LT5RT1-18-CDL or equivalent in Wipro, Havells, Jaquar.
Supply only in replacement single pole enclosure with a two pin and earth plug and socket complete with one single pole MCB 32/40 Amp 240 Volts complete all as specified and directed.
Supply only in replacement die cast aluminium frosted PC diffuser, IP65 gate light. Make Jaquar module "ORBISS" Cat part No. LGTP01X012XW suitable for retrofit LED bulb 10 Watt complete all as specified and directed or equivalent in crompton,Bajaj,Havells.
Supply only in replacement LED post top latern with die cast aluminium spigot,spun aluminium powder coated top cover, aluminium PDC heat sink, opal PC diifuser and clear acrylic IP65, Post top lantern 30 Watt. Make-Halonix cat part no. HLPT-04-30-CW or equivalent in crompton, Bajaj, Havells, Jaquar Including LED 30 Watt complete complete all as specified and directed
Supply only in replacement Vertical Distribution Board (TP&N), double door suitable for FP MCCB 100 Amps as incomer and outgoing MCBs 4 ways and should be IP 43 protected with Copper insulated BusBar assembly ,Isolated Neutral Bar ,Earthing bar ,door earthing. Makes: Legrand/IndoAsian Optipro/Schnider Note: (i) Rate includes MCCB 4 pole 100 Amp, 16KA, 415 V with adjustable thermal settings. (ii) MCCB,MCB & DB shall have the same make.
Supply only in replacement Distribution Board (SPN) double door 12 Way and should be IP 43 protected with Copper Bus bar, Earth Bar , neutral Bar Door Earthing. Make: IndoAsian Optipro or equivalent in Havells/ Legrand
Supply only in replacement Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar, Earth Bar , neutral Bar Door Earthing. Make: IndoAsian Optipro or equivalent in Havells/ Legrand
Supply only in replacement Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar, Earth Bar , neutral Bar Door Earthing. Make: IndoAsian Optipro or equivalent in Havells/ Legrand
Repair of fans: Material and labour for Rewinding of AC ceiling fan single phase 230 volts, 50 c/s 1200mm sweep, any make and type with appropriate gauge super enamelled copper winding wire with allied insulation winding material, varnishing with air drying insulation varnish including fixing of any item found damaged/unserviceable i.e capacitor of appropriate capacity, PVC connector, rubber pads, PVC strip steel clamps and testing complete after rewinding and assembling Note: Capacitor, PVC connector, rubber pads, PVC strip clamps, if any replaced, shall be measured separately under respective items.
Description all as per srl item No 56 here-in-before but fan of 1400 mm sweep.
Description all as per Srl item No 56 here-in before but exhaust fan 300mm sweep complete all as specified
Description all as per Srl item No 56 here-in-before but exhaust fan upto 380mm sweep complete all as specified
Description all as per Srl item No 56 here-in-before but wall mounting fan upto 450mm sweep complete all as specified
Description all as per srl item No 56 here-in-before but for bracket/cabin fan of size upto 400mm sweep AC 230/240 volts.
Description all as per srl item No 56 here-in-before but for bracket/cabin fan/Pedestral Fan of size of size 450mm sweep.
Supply & fixing in replacement ball bearing suitable for AC ceiling fan 1200/1400mm sweep to replace the unserviceable ball bearing of fan motor complete all as specified and directed.
Supply & fixing in replacement ball bearing suitable for AC exhaust fan/Bkt Fan/Pedestral of size 300 to 380mm sweep to replace the unserviceable ball bearing of fan motor complete all as specified and directed. .
Supply & fixing in replacement ball bearing suitable for AC exhaust fan/Bkt Fan/Pedestral of size 400 to 450mm sweep to replace the unserviceable ball bearing of fan motor complete all as specified and directed. .
Supply only in replacemennt Gun metal bush of any type as suitable for ceiling fans 1200/1400 mm sweep, exhaust fans of any make and size complete all as specified and as directed by the Engr-in-charge.
Supply only in replacement rubber pads for packing capacitors of AC ceiling fan in down rod bracket suitable for fan of any size and make, as approved by Engr-in-Charge.
Supply only in replacement steel strip clamp with fixing screws for holding capacitors of ceiling fan and fixing to MS socket of fan motor complete all as specified and as directed by the Engr-in-charge
M & L for electric cable PVC insulated with copper conductor (flexible cable) of size 23/0.0076 twin core for connecting fan to electric system, complete all as specified & directed.
Supply and fixing in replacement fan blades made of aluminium material for AC ceiling fans 1200mm as per sample including fixing screw and washer complete suitable for fans of old model all as directed and specified by the Engr-in-charge
Supply and fixing in replacement fan blades made of aluminium material for AC ceiling fans 1400mm as per sample including fixing screw and washer complete suitable for fans of old model all as directed and specified by the Engr-in-charge
M&L for Spray painting to AC ceiling fan 1200/1400 mm sweep any make complete to motor assy, down rods, blades with ISI marked white synthetic enamel paint after preparation of surface including filing cavities with filler, complete all as directed and specified by the Engr-in-charge.
M&L for Spray painting to AC ceiling fan exceeding 300mm and upto 450mm sweep any make complete to motor assy, down rods, blades with ISI marked white synthetic enamel paint after preparation of surface including filing cavities with filler, complete all as directed and specified by the Engr-in-charge.
M & L for Canopies for AC ceiling fan of size 1200/1400mm sweep for any make of fan.
M&L for hanging clamp suitable for ceiling fan of size 1200/1400mm of any make complete with nuts, bolts, rubber reel and locking pin complete all as directed by Engr-in-Charge.
Supply and fixing in replacement down rod (hanging rod) made of GI tubing 20mm bore for length upto 90cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified.
Supply and fixing in replacement down rod (hanging rod) made of GI tubing 20mm bore for length 120cm suitable for AC ceiling fan of size 1200mm /1400mm sweep including provision of hole for fixing of nut and bolt all as specified.
Repair to Internal wiring : Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good disturbed surface of walls and roofs complete all as specified and as directed.
Material and labour for point wiring one light/fan point controlled by one way switch 6 Amp complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into suitable module Modular metal flush Boxes of Make : Elvira Indoasian or equivalent in Havells, Legrand including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified.
Description all as per srl item No 79 here-in-before but one 3 pin socket outlet 6 amp independent
Description all as per srl item No 79 here-in-before but one 3 pin socket outlet 6 amp same board
Description all as per srl item No 79 here-in-before but one bell/ buzzer point controlled by one switch complete all as specified and directed.
Description all as per srl item No 79 here-in-before but for one 2 way light point controlled by two 2 way switch.
Description all as per srl item No 79 here-in-before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 sqmm for point wiring and 2.5 Sqmm as in continous earth wire.
Description all as per srl item No 79 here-in-before but for one AC plug in socket independent with cable of size 4 Sqmm for point wiring and 4 Sqmm as in continous earth wire.
Material and labour for complete point wiring for One light/fan point controlled by one, one way switch complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in existing conduit terminated into suitable module modular metal flush boxes of Make : Elvira indoasian or equivalent in Havells ,Legrand including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and directed Note: suitable Module flush boxes as specified to be provided in replacement of MS/Galvanised sunken boxes and measured seperately..
Description all as per srl item No 86 here-in-before but One 3 pin socket outlet 6 amps independent complete all as specified and directed.
Description all as per srl item No 86 here-in-before but One 3 pin socket outlet 6 amps on same board complete all as specified and directed.
Description all as per srl item No 86 here-in-before but One bell/buzzer point controlled by one, complete all as specified and directed.
Description all as per srl item No 86 here-in-before but for one 2 way light point controlled by two 2 way switch.
Description all as per srl item No 86 here-in-before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 sqmm for point wiring and 2.5 Sqmm as in continous earth wire.
Supply and fixing in replacement modular type switch, one way one module 6 Amps, 1 module, ISI marked complete all as specified and directed. Make: Indoasian or equivalent in Havells, Legrand.
Supply and fixing in replacement modular switch Polycarbonate material ISI marked two way, 1 module, 6 Amps, 240 V. Make: Indoasian or equivalent in Havells, Legrand.
Supply and fixing in replacement modular bell push with indicator Polycarbonate material ISI marked 1 module, 6 Amps, 240 V. Make: Cat ref 800110 Elvira Indoasian or equivalent in Havells, Legrand.
Supply and fixing in replacement Ding Dong, AC 230 volts Single Phase.
Supply and fixing in replacement of modular type socket 5 pin, 6 Amps combined 2 module complete all as specified and directed. Make:Indoasian or equivalent in Havells, Legrand.
Supply and fixing in replacement of modular type socket 5 pin, 6 A/16 Amps combined 2 module complete all as specified and directed and having pencil free operation & child safety shutter. Make: Indoasian or equivalent in Havells, Legrand
Supply and fixing in replacement of modular type switch Polycarbonate material ISI marked, 16 Amps, 1 module complete all as specified and directed. Make: Indoasian or equivalent in Havells, Legrand.
Supply and fixing in replacement modular Fan regulator 2 Module stepped type (electronic ) made of polycarbonate for 1200/1400mm sweep AC ceiling fan.Make: Indoasian or equivalent in Havells, Legrand.
Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.
Supply and fixing LED tubelight fitting 18-20 W LED, 230V, Box type complete in all respect . Cat part No DMLN1LT8-16 of Crompton or equivalent in Havells, Wipro alongwith LED tubeRod with heat dissipation capability suitable for G-13 base tube lights base fluorescent T8/T12 luminaries, 20 watt LED wattage with colour temp of 5700 K 1800 lumens and with surge arrestor complete in all respect. Cat Part No LTT8-20 of Crompton/Cat Part No LL13-181-650 of Wipro or equivalent in Havells, Jaquar. Note:- The LED batten and LED tube rod shall be of same make.
Supply and fixing in replacement LED wall mounted tube fitting 10W LED for mirror complete fitting Make: Havells Cat Part No LHEXBTP7IN1W009 or equivalent in Jaquar/Crompton/Wipro.
Supply and fixing in replacement down lighter fitting with LED light fitting 18 W LED 6000K, 230 V suitable for Recess mounted downlighter with pressure die-cast Al. heat sink & high brightness LED, with diffuser to give glare free light suitable for existing ceiling cutout Ø 160 mm complete all as specified and as directed. MakeCG cat part No LSCRM-18W-CDL/NW/WW or equivelent Make /C&S/Havells/wipro/Jaquar
Supply and fixing in replacement LED ceiling light fitting recess mounting 2'X2' white powder coated CRCA housing with LED's seamless front frame with flat white high transmission acrylic cover complete all as specified and directed. Cat part No SkyLux BZRSQL 36W XL NW or equivalent in Havells/Crompton/Philips/ Wipro/Jaquar
Supply and fixing in replacement of decorative wall light fitting made up of high grade engineering plastic material including suitable retrofit CFL 20W/LED bulb 7 Watt complete all as specified and directed. Make : Havells Cat part No LHFHCHE1TL1W020 or equivalent in Wipro, Crompton, Jaquar
Supply and fixing in replacement of Decorative, wall mounting fixture, in durable plastic body and designer mesh in gold finish suitable for and including 14 Watt retrofit LED complete all as specified and directed along with CFL lamp 14 Watt. Make : Havells Cat part No LHFOECE1TZ1B014 or equivalent in Wipro, Crompton, Jaquar
Supply and fixing in replacement of Decorative, wall mounting fixture, SS finish fixture with opal diffuser suitable for 5 Watt LED complete all as specified and directed along with LED lamp 5 Watt.Make : Havells Cat part No LHJC02108499 or equivalent in Wipro, Crompton, Jaquar
Supply and fixing in replacement energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalent in Crompton/ Philips/ Wipro/Jaquar.
Supply and fixing in replacement lamp holder, PVC/Polycarbonate type with back plate for batten fitting.
Supply and fixing LED lamp suitable for B22 holder of capacity 7watt. Make : Havell's/bajaj/Philips/Wipro/Jaquar
Supply and fixing in replacement Vertical Distribution Board (TP&N), double door suitable for FP MCCB 100 Amps as incomer and outgoing MCBs 4 ways and should be IP 43 protected with Copper insulated Bus Bar assembly, Isolated Neutral Bar, Earthing bar all as specified and directed including taking down old UNSV DB/MCB any type. Make: Legrand/IndoAsian Optipro/Schnider Note: (i) Rate includes MCCB 4 pole 100 Amp, 16KA, 415 V with adjustable thermal settings. (ii) TPN DB and MCCB shoould be of same make.
Supply and fixing in replacement of Distribution Board (SPN) double door 12 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar Door Earthing including taking down old UNSV DB/MCB any type all as specified and directed. Make: IndoAsian Optipro Cat Part No 811808 or equivalent in Havells/ Legrand
Supply and fixing in replacement Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar, Earth Bar, neutral Bar Door Earthing. Make: IndoAsian Optipro Cat Part No 811807 or or equivalent in Havells/ Legrand inluding taking down old UNSV DB/MCB any type.
Supply and fixing in replacement MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL
Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, ISI Marked complete all as specified and directed. Make:- IndoAsian Optipro or equivalent in Havells/C&S Electric/HPL
Supply and fixing sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.
Description all as per srl item no 116 here-in-before but of size 2 x 6 Sqmm with earth wire of size 6.0 Sqmm drawn through existing PVC/steel surface/concealed conduit.
Description all as per srl item no 116 here-in-before but of size 2 x 10 Sqmm FRLSH with earth wire of size 10.0 Sqmm.
Description all as per srl item no 116 here-in-before but submain of size 2 x 10 FRLSH Sqmm with earth wire of size 10.0 Sqmm drawn through existing PVC/steel surface/concealed conduit.
Material and labour in replacement for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.
Supply and fixing Modular GI Metal Flush Box 12 module Make havells crabtree catpart no. ACTXMIIX12 or equivalent in Legrand complete all as specified and directed
Supply and fixing Modular GI Metal Flush Box 8 module complete all as specified and directed. Make havells crabtree catpart no. ACTXMIIX08 or equivalent in Legrand
Supply and fixing Modular GI Metal Flush Box 6 module complete all as specified and directed. Make havells crabtree cat part no ACTXMIIX06 or equivalent in Legrand
Supply and fixing Modular GI Metal Flush Box 4 module complete all as specified and directed. Make havells crabtree catpart no. ACTXMIIX04 or equivalent in Legrand
Supply and fixing Modular GI Metal Flush Box 3 module complete all as specified and directed. Make havells crabtree catpartno. ACTXMIIX03 or equivalent in Legrand.
Supply and fixing Modular GI Metal Flush Box 2 module complete all as specified and directed. Make: havells crabtree catpartno. ACTXMIIX02 or equivalent in Legrand.
Supply and fixing White Cover Plate with Frame 12 module Complete all as specified and directed. Make: havells crabtree model athena catpart no.ACAPNCWV12 or equivalent in Legrand.
Supply and fixing White Cover Plate with Frame 8 module Complete all as specified and directed. Make: havells crabtree model athena catpart no.ACAPNCWV08 or equivalent in Legrand.
Supply and fixing White Cover Plate with Frame 6 module Complete all as specified and directed.Make: havells crabtree model athena catpart no.ACAPNCWV06 or equivalent in Legrand.
Supply and fixing White Cover Plate with Frame 04 module Complete all as specified and directed. Make:havells crabtree model athena catpart no.ACAPNCWV04 or equivalent in Legrand.
Supply and fixing White Cover Plate with Frame 03 module Complete all as specified and directed. Make havells crabtree model athena catpart no.ACAPNCWV03 or equivalent in Legrand.
Supply and fixing White Cover Plate with Frame 02 module Complete all as specified and directed. Make: havells crabtree model athena catpart no.ACAPNCWV02 or equivalent in Legrand.
Supply and fixing in replacement of AC single phase 240 Volt 50 Hz antic type ceiling fan of size 1320mm sweep complete with canopy and hanging rod with all accessories including nuts, bolts, clamps etc complete all as specified and directed. Make Havells Model Cedar U/L 1320 mm (Antique Brass) or equivalent in Crompton, Khaitan, Bajaj.
Supply only for replacement of 2 x 18W Indoor decorative LED Rod extruded Aluminium (powder coated) with opal diffuser, 2G11 pimn IP20. Make HALONIX Cat Part No HLL-01-18-CW or equivalent in Jaquar/Crompton/Wipro.
Supply only in replacement of LED Tube Rod Polycarbonate with superior aesthetic and heat dissipation capability suitable for G-13 base tube lights base fluorescent T8-T12 luminaire, 18-20 watt LED wattage with colour temp of 6000K 1800 lumens and with surge arrestor complete in all respect suitable for installation in existing T8 tubelight with G13 lamp holders to give glare free light 18/20 watt. Make : Model LHEXCEP7UN1W020 of Havells or Cat part NO LTT 8-20 of Crompton or LL13-181-650 of Wipro, or equivalent in Jaquar
Prakash Trading Corporation
LAL CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .