Civil and MEP work for Clinical Scientist Laboratory at 6th floor in RRU Building at ACTREC

Amount

Part A Civil

Providing & fixing in position full height partly glass panelled & partly solid partition out of aluminium frame work of size 65 x 38 mm tubular frame, 18 gauge having grid spacing at 600 x 600 mm c/c both ways & covered with 12 mm thick marine BWP (boiling water proof) plywood on both sides of framework & finished with 1 mm thick laminate of approved color & texture. The framework shall be properly screwed to the walls, ceiling & floor in order to keep partion stable & firm all as required as per site condition. Plywood shall be screwed to the framework. The space between the framework grid shall be filled with rigid board glass wool / rockwool/open cell nitrile rubber having 50 mm thickness with density equivalent to 48 kg/cum for sound insulation. The partition will have an opening as per the height specified in the drawing. Clear plain glass of thickness 12 mm with etching pattern (as per design) will be fixed in the opening with second class indian teakwood beading of size 40 mm x 12 mm on both side. Wood beading will be finished in two or three coats of french polish (glossy/mat) matching to partition laminate required finish is achieved. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. Provision shall be made for wire management to take care of basic wiring requirement for providing power data voice switches on a modular switch plate. All material will be of approved make. All works shall be completed as per the drawing, specification & direction of the EIC.

Flush door with vision panel (fixed on hinges with mortise lock) (Size 900 mm L X 2400 MM h Providing & fixing in position door with frame of second class indian teak wood of size 100 x 50 mm & solid core waterproof flush door shutter of 35 mm thick & finished with 1 mm thick laminate of approved colour & texture on both sides & second class teak wood lipping of size 35 x 12 mm on edges of shutter. The shutter shall be provided with a vision panel of size 450 x 450mm using glass of 8 mm thick ( plain with option of etchng) fixed with second class indian teak wood beading of size 19 x 12 mm on both sides. Door shall be fixed using SS brush finish brass butt hinges of size 100 x 75 mm x 3 mm & provided with a surface mounted hydralic door closer, SS matt finish concealed mortise lock case with lever handle, 1 no 450 mm tower bolt, pvc door buffer & SS brush finish door stopper. All exposed second class indian teak wood lipping & frame shall be finished with 2 to 3 coats of french polish (matt/gloss) to match the colour / shade of the laminate till the require finish is achieved. All material shall be of approved make. All works shall be completed as per the drawing, specification & direction of EIC.

S.S. SINK: - Providing and fixing in position Stainless Steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. WITH DRAIN BOARD (ELEGANCE 1.00MM THICK) 1145mm x 510mm large x 200mm

GRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Providing and fixing 18mm thick

CUDDAPAH Providing & laying 20-35mm thick cuddaph stone slabs in platforms/sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces.

C.P.V.C. PIPE- CONCELEDproviding, laying , jointing, fitting & testing C PVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (prince, fiNoslex, supreme, liason, Astral make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings etc. complete all as per specified and directed by Engineer in Charge. CPVC Pipe 15 mm including all fittings.

P.V.C. PIPES: Providing, laying, jointing, fitting, testing heavy quality P.V.C. pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by Engineer-In-Charge: PVC Pipe 40 mm

Providing & laying poly vinyl chloride (PVC) rolls flooring manufactured of approved make and approved pattern for flooring, skirting/dado laid on existing cement tile or concrete of plastered floor finish with suitable adhesive as per manufacturers specifications close jointed and finished to proper bends, slopes and plumbs as directed etc. complete generally as per manufacturer’s specifications. 1.3 mm thck PVC flooring.

Providing & fixing Roller blinds (Premium quality) of approved make with heavy duty roller brackets & necessary fixtures. Warranty for roller mechanism & others accessaries shall be for One year from date of installation. [AS PER SAMPLE AVAILABLE AT SITE] [Payment will be made on actual Mesurement basis. Windows mesurement to be taken before installation of roller blinds for achieving one piece work. ]

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm [Armstrong make] in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of Aluminum sheet having electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Removing of Existing false ceiling & Existing AC duct (if any) and stacking the serviceable material as directed by EIC.

Providing & fixing black film for room glass complete job as directed by EIC.

Part B HVAC

Supply, Installation, Testing and Commissioning of chilled water Cassette fan coil unit complete with decorative panel, drain pump cordless remote control etc Unit shall have 3 Row Deep cooling coil with coper tube diameter is 9.52 mm and thickness 0.33 mm with hydrophilic Aluminium fins. Complete coil must be designed for standard working pressure is 1.6 MPa(16bar) and the test pressure is 3.3MPa(33bar). Unit to be provided with SS drain pan with 7mm PE insulation and +200 mm extended. Direct driven fan (three speed) motor, operated on 230 volts, single phase, 50Hz, AC supply. Unit to be provided with Wireless remote. It shall also have RS485 Modbus communication function for BMS control. ESP for the Fan Coil Unit be 80 Pa Minimum( In case of 3 Tr, 4 Tr and 5 Tr) or Else Specified. Units need to BIS/Eurovent Certified. The unit complete with valve assembly with modulating actuator.The piping as recommanded by the OEM connect tot the main chilled water line is also included. The Cut outs to be made in ceiling as per the Machine for the Servicing purpose should be included in the price. Each Unit to be provided with Cordless Remote with Tempearture dsiplay. It has to based on microprocessor operations which can realize intelligent control of room temperature. It shall also have RS485 Modbus communication function or Bacnet for BMS control. Minimum Capacity should be as follows:

3.75 TR (1500 CFM) 4 way chilled water cassette

3.0TR (1200CFM) 4 way chilled water cassette

Supplying, fixing, testing and commissioning of Chilled water pipes (Pre-Insulated) of following sizes of MS ‘C’ class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.The pipes should be insulated with closed cell puf of density 36±2 Kg/Cum of below mentioned thickness. The Pipe should be workable in the temp. range of -50 Degree Celcius to 120 Degreec Celcius. Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

80 mm with 50 mm PUF thicknes and 26 Gauge AL Cladding

65 mm with 36 mm PUF thicknes and 26 Gauge AL Cladding

50 mm with 36 mm PUF thicknes and 26 Gauge AL Cladding

40 mm with 36 mm PUF thicknes and 26 Gauge AL Cladding

Supply, Installation, Testing amd commissioning of PVC (minimum 15kg/sqcm pressure rated) drain water piping complete with fittings(elbows,tees, reducers,sockets,u trap etc.) supports, jointing insulated with XLPE class O tubular insulation and any other item required to make the system compelete. Nominal diameters of pipe in mms as inducated below:

25 mm dia pipe, Insulation thickness - 19 mm

32 mm dia pipe, Insulation thickness - 19 mm

40 mm dia pipe, Insulation thickness - 19 mm

GI DUCT: Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications and as per SMACNA standard of following sheet thickness complete as required.

Thickness 0.63 mm sheet ( 24 SWG)

Supply and fixing of 25 mm thickness duly laminated aluminium foil (minimum 60 micron) of mat finish closed cell Nitrile rubeer (Class O) insulation on the existing duct after applyng suitable adhesive for Nitrile Rubber. The joint shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specification and as required.

Supply, installation, testing and commissioning of GI volume control duct damper/Non Return damper 18 guage GI. frame & 20 guage GI blades complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

SITC of Extruded aluminium powder coated diffuser with volume control damper with all necessary supports as per directed and as instructed by OIC-ES

SITC of Extruded aluminium powder coated diffuser/ Grill without volume control damper with all necessary supports as per directed and as instructed by OIC-ES

SITC Control cables/power cable to the unit. All Exposed Cable should be laid in GI tray.

Dismatling existing ducting, diffuser,damper, grill, piping etc as per instructed as directed by OIC-ES

Part C Electrical

Supply, installation, testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, Aluminium stranded conductor, armoured, 1100 V class

3.5Cx50 Sq.mm A2XFY Aluminium Conductor for VTPN DB incomer from Gr floor to 6th floor

3.5Cx25 Sq.mm A2XFY Aluminium Conductor for Power DB Incomer

Supplying & erecting heavy duty flange type brass cable glands for end jointing of various sizes for PVC armoured cable with brass washers, rubber rings complete with cable ends & leads connected, with gland double earthing, work completed in all respect all as per instructions and as directed by E-I-C, ES

Gland for 3.5core x 50sqmm cable

Gland for 3.5core x 25sqmm cable

Supplying & erecting crimping type copper lugs confirming to IS suitable for various core sizes evenly crimped with high pressure tools & connected to switch gear terminals with brass/ cadmium plated nut bolts in an approved manners along with lug crimping pest etc all as directed by E-I-C, ES.

Lug for 50sqmm cable

Lug for 25sqmm cable

Lug for 16sqmm cable

DISTRIBUTION BOARDS Supply, installation, testing & commissioning of 500V Distribution Boards as speci- fied , 'i) Copper busbars together with tapped neutral bar for individual phases. , copper earth strip with tapping for EEC , Interconnections and earthing. Sheet steel enclosure suitable for recessed or surface mounting with hinged lockable doors interlocked. Thikness of 1.6mm , Phase to phase barriers in case of 3Ph boards. , 'vii) Necessary MS support frame & painting, labelling, phase indicating lamps with fuses etc. complete.

Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 8 Way VTPN DB 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of Incoming 100 amps TP + Neutral 16 KA MCCB and Outgoing , 63 A TPN MCB Qty 02 Nos and 40 A TPN MCB Qty 06 Nos , interconnection between incomer MCCB and bus bars as required and outgoing MCB . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

SITC of Power Distribution Boards as per specifications in tender 12 Way TPN DB power Distribution Board comprising of Incomer : i) 63 Amp TPN MCB+4P TYP-2 SPD 12KA ii) 3Nos, 32Amp DP ELCB(100 mA) Outgoing : i)36Nos 16 Amp SPMCB

Supply ,Installation,Testing & Commisioning of LED shaped 18 Watt Premium Range Recessed Downlighter having pressure die-cast aluminimum housing with white front bottom frame suitable to following features. - Luminaires suitable to Aluminium metal grid ceiling or Gypsum or POP, -Minimum System Lumen output 1800 lumens -In built electronic LED pre wired driver, -Luminaire shall be with special translucent --High Surge Protection:-2.5kV. -High diffuser>85%, -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Poly Carbonate reflector. -CRI>80,THD<10%. -High Efficacy gretaer than or equal to 100 lm/watt, -Provide Uniform low glare lighting non yellowing/PMMA lens for better light distribution, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 4800K.

SITC of UV Light fixture 30 W , 4 feet witn mounting bracket 45Deg. Ceiling rose as required with complete fixing accessories

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS rate is for one circuit per meter ( i.e 2 X 4 sq. mm + 1 X 4 sq. mm earth wire)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box , and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Secondary point wiring light to light looping with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

3 Module

6 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Modular switch 6A/16A

Modular Socket 6A/16A

SITC of 20 Amps DP MCB C Curve + Earth including metal enclosure box and required fixing accessories.

SITC of 32 Amps DP MCB C Curve + Earth including metal enclosure box and required fixing accessories.

SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

SITC of CAT 6 LAN cable for DATA including 25mm PVC Conduit Supply,Installation, Testing & Commissioning of UTP 23 AWG 4 pair CAT 6 LAN Cable to TIA/ EIA 568 B.2.1.in the surface/ recessed steel/ PVC conduit as required.

NIKHIL CONSTRUCTIONS CO