Construction Of Warehouse 260 Mt And Processing Shed 114.50 Sqm

Amount

Processing Shed 114.50 SQM

Item No.1 :-Excavation for foundation in earth, soils of all types, sand,gravel and soft murum,including removing the excavatedmaterial upto a distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation andnecessarybackfilling, ramming,watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Item No.2 :-Providing dry trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick, including hand packing and compacting, etc. complete.

Item No.3 :-Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap / granite / quartzite / gneiss metal for foundation and bedding / steps, including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, etc. complete.The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, etc. (Wooden centering will not be allowed), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer), etc. complete.With fine aggregate (Crushed sand VSI Grade).

Item No.4 :- Providing and laying in situ /ReadyMix cement concrete M-20 of trap / granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations,grillage andfootings of R.C.C. columns and steel stanchions etc. including bailing out water, Steelcentering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel)etc. complete,withfully automatic microprocessor based PLC with SCADA enabled reversible DrumTypemixer/concreteBatchmixplant (Panmixer)etc.complete. With fine aggregate (Crushed sand VSI Grade)

Item No.5 :- Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks, laying / pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided, and curing, etc. complete. (Excluding reinforcement and structural steel), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer), etc. complete.With fine aggregate (Crushed sand VSI Grade).

Item No.6:- Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed, including steel centering, formwork, cover blocks, laying / pumping, compaction, and roughening the surface if special finish is to be provided, and curing, etc. complete. (Excluding reinforcement and structural steel), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer), etc. complete.With fine aggregate (Crushed sand VSI Grade).

Item No.7:- Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls, including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces, and watering, etc. complete.

Item No.8 :-Filling in plinth and floors with contractor's material / brought from outside and approved by Engineer-in-charge, in layers of 15 cm to 20 cm, including watering and compaction, etc. complete.

Item No. 9 :-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Item No.10 :-Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches, etc. as per detailed designs, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding, and supporting as required, complete.

Item No.11 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed designs and drawings or as directed, including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections, and one coat of anticorrosive paint and over it 2 coats of oil painting of approved quality and shade, etc. complete.

Item No.12:- PProviding and fixing colour coated Zincalume® AZ150 (min. 150 gms/sq.m total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), high-strength steel with minimum 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium, 43.4% zinc, 1.6% ilicon),withCOLORBOND® steel quality super durable polyester paint coat (with inorganic pigment).The paint shall have a total coating thickness of nominal 35 µm, comprising of nominal 25 µm exterior coat on top surface and nominal 10 µm reverse coat on back surface. Profile sheet shall have nominal 950–1050 mm effective cover width and nominal 25–30 mm deep ribs with subtle square fluting in the five pan at nominal 180–250 mm center-to-center. The end rib shall be designed for anti-capillary groove and return legThe feed material should have coil manufacturer’s product details marked at regular intervals. Including fasteners with minimum 25 µm Zinc-Tin alloy coated, Hex head, self-drilling screw, etc. complete. (Weight of profile: 4.52 kilograms per square metre)

Item No.13 :-Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248 1979) (Without mechanical gear)

Royalty Charges

For hard murum and otherminerals

Material Lab Tests

Coarse Agreegate

Concrete mix design M20

Concrete cube tests

Construction Of Warehouse 260 MT

Item No.1 :-Excavation for foundation in earth, soils of all types, sand,gravel and soft murum,including removing the excavatedmaterial upto a distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation andnecessarybackfilling, ramming,watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Item No.2 :-Providing dry trap / granite / quartzite / gneiss rubble stone soling 15 cm to 20 cm thick, including hand packing and compacting, etc. complete.

Item No.3 :-Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap / granite / quartzite / gneiss metal for foundation and bedding / steps, including steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, etc. complete.The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, etc. (Wooden centering will not be allowed), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer), etc. complete.With fine aggregate (Crushed sand VSI Grade).

Item No.4 :- Providing and laying in situ /ReadyMix cement concrete M-20 of trap / granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations,grillage andfootings of R.C.C. columns and steel stanchions etc. including bailing out water, Steelcentering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel)etc. complete,withfully automatic microprocessor based PLC with SCADA enabled reversible DrumTypemixer/concreteBatchmixplant (Panmixer)etc.complete. With fine aggregate (Crushed sand VSI Grade)

Item No.5 :- Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks, laying / pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided, and curing, etc. complete. (Excluding reinforcement and structural steel), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer), etc. complete.With fine aggregate (Crushed sand VSI Grade).

Item No.6:- Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed, including steel centering, formwork, cover blocks, laying / pumping, compaction, and roughening the surface if special finish is to be provided, and curing, etc. complete. (Excluding reinforcement and structural steel), with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer), etc. complete.With fine aggregate (Crushed sand VSI Grade).

Item No.7:- Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls, including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces, and watering, etc. complete.

Item No.8 :-Filling in plinth and floors with contractor's material / brought from outside and approved by Engineer-in-charge, in layers of 15 cm to 20 cm, including watering and compaction, etc. complete.

Item No.9 :-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Item No. 10 :-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm. thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Item No. 11 :-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Item No.12 :-Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches, etc. as per detailed designs, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding, and supporting as required, complete.

Item No.13 :-Providing and laying in situ cement concrete M20 with tremix treatment for 100mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete

Item No.14 :-Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans 5 mm thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete.

Item No.15 :- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed designs and drawings or as directed, including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections, and one coat of anticorrosive paint and over it 2 coats of oil painting of approved quality and shade, etc. complete.

Item No.16:- Providing and fixing colour coated Zincalume® AZ150 (min. 150 gms/sq.m total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), high-strength steel with minimum 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium, 43.4% zinc, 1.6% ilicon),withCOLORBOND® steel quality super durable polyester paint coat (with inorganic pigment).The paint shall have a total coating thickness of nominal 35 µm, comprising of nominal 25 µm exterior coat on top surface and nominal 10 µm reverse coat on back surface. Profile sheet shall have nominal 950–1050 mm effective cover width and nominal 25–30 mm deep ribs with subtle square fluting in the five pan at nominal 180–250 mm center-to-center. The end rib shall be designed for anti-capillary groove and return legThe feed material should have coil manufacturer’s product details marked at regular intervals. Including fasteners with minimum 25 µm Zinc-Tin alloy coated, Hex head, self-drilling screw, etc. complete. (Weight of profile: 4.52 kilograms per square metre)

Item No.17 :-Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248 1979) (Without mechanical gear)

Item No.18 :-Providing and applying plastic emulsion paint of approved quality,colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete.

Royalty Charges

For hard murum and otherminerals

Material Lab Tests

Concrete mix design M20

TMT steel bars (All dia.)

Concrete cube tests

Burnt Bricks

Hard murum

ESHS Compliance

Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct

M/s VIRA INFRASTRUCTURE (BID ID -6814977)

SOMESH JAGADISH KAYASTH (BID ID -6814993)