Loading…
Loading…
Tender Value
₹6.3 L
EMD Value
₹12,620
Closing Date
8 Jun 2026, 12:00 pmDue tomorrow
Exe. Engineer Roads Division No 3 MC Chandigarh
Exe. Engineer Roads Division No 3 MC Chandigarh
RAISING PLATFORM FOR BETTER SITTING ARRANGEMENT AT PRESS and OFFICERS GALLERY AT 6TH FLOOR MC BUILDING SECTOR-17 CHANDIGARH.
2026_MCC_92545_2
MCC/2026/ROADS-III/04-14
Open Tender
Civil Works - Others
60 days
Work
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
₹12,620
29 May 2026
29 May 2026
8 Jun 2026
29 May 2026
8 Jun 2026
29 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and fixing wooden paneling with 19mm waterproof ply fixed with each other to form a platform i/c the cost of adhesive, cutting shapes, screws complete in all respect to the entire satisfaction of Engineer-in-Charge. | - | Sqm | - | - | BI01010001010000000000000515BI0100001111 |
| 2 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick (DSR 9.127.2) | 1 | Sqm | - | - | BI01010001010000000000000515BI0100001112 |
| 3 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 20X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the ply board as per direction of Engineer-in-charge. | - | Rmt | - | - | BI01010001010000000000000515BI0100001113 |
| 4 | Providing and fixing acoustic floor mats of approved make and thickness minimum 10 mm made of recycled rubber / EPDM / sound insulating material, having impact sound reduction properties, over existing plywood board, fixed with approved adhesive as per manufacturer’s specification, including surface preparation, cutting to required size, edge finishing, joint sealing (if required), complete as per direction of Engineer-in-Charge | 1 | Sqm | - | - | BI01010001010000000000000515BI0100001114 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.07 MB
BOQ_113632.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid