Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹47.5 L+₹7.0 L (17.1%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L2 | Rejected-Finance Higher Bid value. | |
| 3 | L3₹47.8 L+₹7.2 L (17.8%)Rejected-Finance | L3 | Rejected-Finance Higher Bid value. | |
| 4 | L4₹48.6 L+₹8.0 L (19.7%)Rejected-Finance | L4 | Rejected-Finance Higher Bid value. | |
| 5 | L5₹49.6 L+₹9.0 L (22.2%)Rejected-Finance | L5 | Rejected-Finance Higher Bid value. |
Tender Value
Refer Docs
EMD Value
₹87,000
Closing Date
7 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
SPL REPAIR TO BLDG NO P 220 SINGLE JCOs ACCN OF 17 MDSR PROVN OF TILLING IN BLDG NO MAP 17 06 X BLOCK OR MD ACCN VEH PARKING COVERSHED IN FRONT OF BLDG NO P170 OF HQ 17 MTN DIV CAMP UNDER GE GANGTOK
2023_MES_618875_1
8138/A/E8
Open Tender
Civil Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹87,000
Yes
20 Oct 2023
14 Sept 2023
9 Oct 2023
15 Sept 2023
7 Oct 2023
23 Sept 2023
Amount
Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.
Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets compelete all as specified and directed.
Dismantling old PGI/CGI sheeting of any gauge thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete.
Roughening surfaces of old concrete floor or wall surface by picking, sweeping clean and washing down with water to remove dust, etc complete.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of dismantled materials/rubbish from site complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar complete all as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm nut n.exc 4Sqm all as specified and as directed.
S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.
S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed.
M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/hardstanding finished the concrete surfaces even and fair without using extra cement etc complete all as specified and directed.
M&L for hardcore of gauge n.exc.63mm (using broken stone or boulders) deposited, spread and levelled in layers not exc. 15cm thick, watered and rolled/rammed to a true surface complete all as directed.
M & L for Plain Cement concrete 100mm thick type B- 2, 1:2:4 (40mm graded aggregate) as in hard stand /path etc including finish the surface even and fair without using extra cement etc complete all as specified and directed.
M&L for pre cast cement concrete block masonry with solid blocks, exc. 10 cm in width and settting in cement mortar 1:6 type C1. (1:3:6) (using 20 mm graded stone aggregate) as per IS 383 complete all as specified and as directed
M & L for 20mm thick rendering in cement plaster in CM (1:4) in two layer and top layer shall be mixed with WPC @ 3% wt of cement on fair faces of stone masonry wall incl finish the surface even and fair without using extra cement complete all as directed and specified (WPC shall be measured and paid separatly)
M&L for 15 mm thick rendering plaster on fair faces of conc faces/ brick wall faces of smooth without extra cement in CM 1:6 complete all as specified and as directed.
M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and smooth (without using extra cement) etc including applying three coats of white wash and after preparation of plastered surfaces complete all as specified and directed.
M&L for applying two coats of white wash on old plastered wall surface including preparation and previously untreated surfaces of ceiling all complete all as specified and directed.
M&L for for applying two coat of exterior acrylic emulsion weather proof paint over a coat of primer on new /old plasterd surface including preparation of new/old plasterd surface etc complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over new wall suface on a coat wall care putty 1mm thick after priming coat complete all as specified and directed.
M&L for preparation of complete removal of existing treatement on old plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over old wall surface on a coat of 1mm thick wall care putty over primer complete all as specified and directed.
S&F powder coated grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600m size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mm x 23mm x 0.3mm thick, cross tee shall be 24mm x 23mm x 0.3mm thick and wall angle shall be 20mm x 20mm x 0.3mm thick complete all as specified and as directed.
M&L 4 mm thick E-board for insulation and accoustic purposes, 595 x 595 mm in size, fixed with staple on snap gird as in ceiling with and including dusting of surface complete all as specified and as directed.
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and directed.
S&F Plain framed, panelled shutter (two panel) 35mm thick with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part 1), kiln seasoned and chemically pressure treated all as specified and directed.
S&F 2nd class hardwood Glazed and skeleton shutters, 30mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8,all as directed and specified.
S&F PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing.
S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
M&L for 2nd class Plain fillets, square, rectangular or triangular in section, clean sawn, of sec area exc 6 & n.exc 13 Sqcm secured with nails or brads complete all as specified and directed.
S&F MS butt hinges 100mm long complete
All as per item No. 32 above but 75mm long complete
S & F 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified.
All as per item No. 34 above but 100mm long complete all as specified.
S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.
All as per item No. 36 above but 100mm long complete all as specified.
S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.
M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
All as per item No. 40 above but openable/fix type window/ventilator complete all as specified and directed.
S&F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & as directed incl taking down old scrap iron grill.
M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamal paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of old or previously treated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamal paint over one coat of red oxide primer on old steel surface complete all as specified and directed.
S&F stain less steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
M&L preparation of old or previously treated wooden surfaces of any description over 10 cm width or grith and applying one coat of synthetic enamel paint over one coat of pink primer on wooden surface complete all as specified and directed.
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel complete all as specified and directed.
M/L for non skid ceramic coloured tiles 7mm to 8 mm thick (square / rectangular) area of each tile exceeding 0.11Sqm, but not exceeding 0.36 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square / rectangular) area of each tile exceeding 0.18Sqm, but not exceeding 0.36 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and as directed.
Ditto all as item No. 49 above but on vertical surface of wall like skerting/dadoi etc on 15mm thick (1:4) rendering etc complete all as specified and directed.
M&L for glazed coloured (300 x 450 mm) x 7 mm th as in skirting/dado over & including 10 mm th rendering in CM 1:4 set & jointed in neat cement sullry & pointed in white or coloured cement to match complete all as spfd & directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing ccomplete all as specified.
M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar etc including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified abd directed.
M&L for lacquer coated precast chequered cement concrete tiles floor of size 300x300x25mm thick set and jointed in neat cement slurry to match over 15mm thick scleed in CM (1:6) complete all as specified and directed
M&L for RCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, cover slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified & as directed. NOTE: Re-inforcement shall be measured and paid separately.
M&L mild steel TMT bars 10 mm dia & over cut to length bent to shape required, including cracking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia or securing with clip complete all as specifid and directed
All as per item No. 56 above but TMT Bar 5 mm dia and over upto and including 10 mm dia in stirrups complete all as specified and directed.
Use and Waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick etc complete all as specified and directed.
Use and Waste for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as spfd and directed.
Dismantling water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing to store complete all as specified and directed.
Supply & fix in replacement Rotational moulded polyethylene water storage tank, 500 litres capacity, ISI marked multi layer constriction (cylindrical vertical with closed top) ISI Marked, hoisted & fixed in position including supply and fixing of 25mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 142/210/455 gms including connection complete all as specified and as directed.
S&F in repairs Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Excavation in trenches inot exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/loose soil for foundation etc complete all as directed.
M&L for PCC 1:3:6 type C2 (40 mm gradede aggregate) as in foundation and mass concrete complete all as directed.
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement moratar (1:6) complete all as directed.
M&L for 15 mm thick rendering plaster on stone masonary other than fair faces of finishes smooth without extra cement in CM 1:4 complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 (20 mm gradede aggregate) as in coping, bed plates parepet, plinth course including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.
Returning, filling in soil/ Back filling of retaining walls using approved earth obtained from excavation incl watering, well ramming, etc complete all as directed.
Removing excavated soil to a dist n.exc 50m complete all as directed.
S&F PVC coated chain link fencing of 50mmx50mm mesh size and made out of 3.15mm dia (2.15mm dia Gl wire and 1mm thick PVC coating) conforming to IS fixed to any type of standard rails, straining bolt etc complete all as specified and directed
M&L mild steel round bars 10 mm dia & over cut to length bent to shape required. including cracking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as spfd and directed
M&L Joist, channel, angle, or tee sections, fillets fixed independently, without connecting plates, etc confirming to Fe-290 (Gde E165) etc complete all as specified and directed.
Taking down 15mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed.
Taking down 20mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed.
Refixing of old 15mm bore steel tubing and connections in new or old position (wall, ceiling or floor, etc) complete all as directed.
S&F galvanised steel water tubing 15 mm bore, medium grade with all fittings and fixed complete to walls / ceiling or laid in floors complete all as directed by the Engr-in- Charge
S&F galvanised steel water tubing 20 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as specified and directed.
Supply and fixing white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520 x 360 x 390 mm with 'P' or 'S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed.
S&F 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.
S&F in repairs vitreous china, white colour, flat back, wash hand basin of size 55 x 40 x 79cm fixed with brackets, including providing 32 mm dia PVC waste pipe, 32 mm bore CP waste coupling and making all necessary connections complete as directed.
S&F in repair 15 mm bore dia angular Stop cocks, cast copper, fancy type, chromium plated, with wall flange screwed down, screwed fro iron pipe or union and complete all specified.
S&F two way Bib tap, cast copper alloy, chromium plated with crutch or butterfly handle with healthfuceset, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one.
S&F in repair Bib tap, long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one.
S&F stainless steel towel rail 600mm long complete all as specified and directed.
S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union Complete.
S&F cromium plated single lever basin mixer with 305mm(12") extended body and 600mm braided connection pipe (without pop-up) complete all as specified and directed.
S&F in repair cromium plated wall mixer 15mm bore with 115mm long bend pipe for connection to over head shower (with Bush & piston diverter fittings) with aerator screwed down for 15mm bore GI Pipe or for brass ferrule. Make Essco ACT PART No SQT-517BKN or equivalent
S&F PVC connections 15 mm size with PTMT nuts of length 450mm Complete
S&F 110mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors, fixed on walls with necessary clips complete all as specified and as directed.
S&F in repairs 110 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as directed.
S&F 110 mm bore PVC (SWR) junction single. (Single T) equal or unequal complete all as directed.
S&F in repair 110 mm bore PVC (SWR) vent cowl fixed in position complete all as specified and directed.
S&F PVC (SWR) floor trap, 75mm plain with grating including jointing with solvent cement complete all as specified and directed.
S&F decorative type curtain rod chromium plated 25mm dia with fixing blackets stops and complete fittings including making good the surface were damaged complete all as specified and directed.
Supply only Integral waterproofing compound
S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw as in cup boards shelves etc complete all as specified and directed.
S&F Extruded brass handles, 100mm fabricated type polished complete all as specified and directed.
S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm flap complete all as specified and directed.
S&F Brass barrel tower bolts, 75mm with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and ditected.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store etc complete.
Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
M&L for 10mm thick rendering plaster in CM (1:4) on fair faces of conc faces/brick wall faces finished even and smooth (without using extra lime or cement) with neeru finish to plastering surfaces complete all as specified and as directed.
S&F 150mm dia PVC half round eve gutter including all fittings like end closer PVC bend, PVC tee etc all as directed by Engr-In-Charge
M&L for 25mm thick PCC (1:2:4) type B1 (20mm graded stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified and directed.
Taking dwon shutters and refixing in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (20mm graded aggregate) as in coping, bed plates, parepet, plinth course including weathering, slightly rounded or chamfered angles and throating all as specified and directed.
Excavationg in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified.
M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:6) including brought up to courses complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 all as specified and as directed.
S&F rolled section as in main and cross beams hip, jack rafters, hollow section purlins, where connected to common rafters and running rails and guides for slidding doors fixed with angle cleats or other connecting plates of grade Fe-410 complete all as specified and directed.
E/M Portion Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, inlcuding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials for taking credit and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
M & L for point wiring with 1.5 Sqmm, single core PVC insulated unsheathed FRLS cable 110 Volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metalic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall / fixed to roof, ceiling etc. and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60mm thick sheet steel duly painted concealed in walls, with 3mm thick Bakelite / PVC sheet ISI marked top cover with brass / chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc., all as specified and as directed.
All as per item No. 116 one light point controlled by one, one way switch.
All as per item No. 116 one 3 pin 5 amps switch socket outlet point on independent board.
All as per item No. 116 one 3 pin socket outlet 5 amps on the same board with other switches
All as per item No. 116 one bell/buzzer point controlled by one push button on the same board with other switches or independent.
All as per item No. 116 one ligh point controlled two way switches.
All as per item No. 116 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 2.5 Sqmm multistandard copper conductor wire FRLS PVC insulated and 2.5 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as spcified and directed by Engineer-in-Charge
All as per item No. 116 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4 Sqmm multistandard copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as spcified and directed by Engineer-in-Charge
Supply and fix switch piano flush type single pole, one way 6 Amp 230 Volts, 50Hz, ISI marked all as specified and directed.
Supply and fix switch outlet 2 in 1, 3 pin, 6A 230 Volts, 50Hz, ISI marked all as specified and directed.
Supply and fix socket, outlet 2 in 1, 3 pin, 6 Amp and 16 amp flush type 230V 50 Hz, ISI marked all as specified and as directed.
Supply and fix switch piano flush type single pole, one way 16 Amp 230 Volts, 50Hz, ISI marked all as specified and directed.
Supply and fix switch piano flush type single pole, two way 16 Amp 230 Volts, 50Hz, ISI marked all as specified and directed.
Supply & fixing buzzer Ding Dong AC 230 volts single pole with suitable fixing arrangement complete with all as accessories all as specified.
S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI marked) complete all as specified and directed.
S&F in repairs LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply and fixing LEDZ inverter batten 1x20 watt 220 V, AC decorative box type with backup time up to 3 hrs, auto cut off after full battery charging, LED tube light connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
S&F only decorative 2 feet LED tube light fittings 1x10W, 220V, AC mirror type including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F in repairs lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as directed.
S&F LED light fitting 1x 9W/ 1x10W bulk head luminairies including LED light driver holder connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.
S&F Exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50Hz copper winding of sweep 150mm complete all as specified and directed by Engr-in-Charge.
Taking down and refixing of Geysers storage type after complition of civil work 25/50 ltrs capacity complete with grounding/drilling in wall and provn of Zinc coated fastner 12mm dia 150mm long x 04 Nos including replace hot & cold PVC pipe complete including nuts/bolts, painting and complete testing all as specified and directed.
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB C curve of 20 amps all as specified.
S&F for MCB DB SPN 8 ways double door 240 volt with 200 Amp rated bus bar, IP-42, IK-09, metal door, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall/ other surface complete all as specified and as directed.
S&F MCB single pole & neutral SPN 32 Amps, 240 Volts, 10 KA rapturing capacity, C curve complete all as directed.
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
Taking down submain wiring of aluminium/copper with PVC/Steel conduit
M&L for concealed sub-main wiring along with earth wire of size e 2x06 sqmm with 1x6 sqmm earth wire,ISI marked FRLS,PVC insulated,multi stranded, copper conductor,single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduit & sinking for sunken boxes & making good to walls, floors etc complete all as specified and directed
M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DBS including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed by Engineer-in-Charge including testing on completion.
M/S S. S CHETTRI AND SONS
M/S ANIL KUMAR THAKUR
KAMLESH ENTERPRISE
SANJAY KAUSHIK
KARMA TSETEN BHUTIA
RAAJ BANGAR
M/S MANOJ VERMA
KARMA SHERPA
MAHENDRA KHAWAS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .