PROVN OF SUB STATION BLDG NEAR GATE NO 4 AT AWC UNDER GE AWC MHOW.

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose Soil all as specified and as directed.

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed.

Excavating over areas, not exceeding 1.5 m deep and getting out Soft / loose soil all as specified and as directed.

Excavating over areas, exc 1.5 m but not exceeding 3 m deep and getting out Soft / loose soil all as specified and as directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exceeding 1.5m above the starting point Soils all as specified and as directed.

Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point Soils all as specified and as directed.

M&L Sand filling and spreadng under floors (interlocking tiles) or in foundations or under & over cable including watering and consolidation with material and labour all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface with material and labour. Broken stone or boulders.

M&L Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, with material and labour Broken bricks.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains etc complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels upto 1.5 mm clear span, bends, benching and hold fasts etc complete all as specified and directed.

M & L 60mm thick Machine pressed precast conctete interlocking paver block fixing with grey cement and pigments of "I" shape or as approved by GE or any colour and size confirming to IS 15658-2006 of M-35 Grade, laid over 30mm (avg) thick dry sand cushioning, filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engg-in-charge including packing of sides by cement concrete finishing surface even and smooth complete all as specified and as directed. NOTE:- Sand cushioning shall be measured and paid separately.

Material and labour RCC M-25 design mix in foundation footing, plinth beam, bases for column and pedestal using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in column, pillars, piers, post etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in lintel beam, roof beam etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in roof slab etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in chajja etc using 20mm graded curshed aggregate complete all as specified and directed.

Formwork to sides of concrete foundations footings bases of columns raft and raft beams sides and sofits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finished sufraces of concrete complete all as specified and directed.

Formwork to sides of pillars posts, struts, piers, columns and stanchions rough finished surfaces of concrete Square rectangular or polygonal complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchibngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work including attached pilasters, buttresses etc vertical or to batter all as specified and directed.

Formwork to Chajjas, troughs and similar items including edges complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

Description same as per item No. 26.00 but 6 mm to 8 mm dia complete all as specified and directed.

Description same as per item No. 26.00 but 5 mm dia and over upto and including 8mm dia in stirrups spacers amd binders quality confirming to TMT bar complete all as specified and directed.

M&L Brickwork with fly ash bricks, modular size straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 using modular bricks complete all as specified and directed.

M&L Brickwork with fly ash bricks, modular size straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 using modular bricks complete all as specified and directed.

M&L Brickwork with fly ash bricks, modular size straight or curved on plan not exc 6 m mean radius, built in cement mortar 1:6 using modular bricks complete all as specified and directed.

M&L Brickwork with fly ash bricks in one brick thick modular size straight or curved on plan not exc 6 m mean radius, honey-comb walling,built in cement mortar 1:4 complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in one layer, first layer 10 mm thick in cement mortar 1:4 and second layer 5 mm thick in cement mortar 1:4, both layers mixed with water proofing compound, surface finished even and fair witout using extra cement. Note- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete. Make:- Water Seal rom Acro Paints, Pidlite Industries Ltd, Accorproof from ACC

M & L 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.

M & L 5 mm thick rendering on brick work or concrete surface in cement mortar 1:3, on ceiling, below chajja and shelves complete all as specified and directed.

M & L for applying two coat of cement base paint over a coat of Birla or JK white cement primer including prepration of newely plastered surface complete all as specified and as directed. Make of cement base paint:- Super snowce, Duracem, Accrocem

M & L for applying two coat of oil bound distemper over a coat of primer including prepration of newely plastered surface as in wall including 1 mm thick Birla white / JK white putty complete all as specified and as directed. Make:- Berger, Asian Paints, Goodlass Nerolac Paints

M & L for applying three coat of white wash including prepration of surface complete on ceiling under shelves and chajja all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate in sub floors, sub base floors, laid over PCC sub base and paving etc complete all as specified and directed.

M&L non skid ceramic coloured tiles 300x300x 7 to 8 mm thick jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make:- Kajaria, Johnson, Orient

M&L glazed ceramic coloured tiles 300x200x8 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Make:- Kajaria, Johnson, Orient

M&L for Machine cut kota stone flooring 18mm thick over and including 20 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade including mirror polishing complete all as specified and directed.

M&L for 15 to 18 mm thick machine cut Kota stone slab on vertical surfaces such as skirting risers of step dado etc over and including 10 mm thick rendering in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and granite polishing complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in alternate ways, surface finished even and fair without using extra cement complete.

S&F steel window with side hung shutter incl box type hinge, fixing lugs, steel handle and steel peg stay complete with glazing bars.

S&F steel window with side hung shutter including box type hinge,fixing lugs,steel handle and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and as directed

S&F framed work such as grills gratings etc and similar works conforming to Fe 410-0 complete all as spd and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane. Make:- Saint Gobain, Atul, Modi Guard

All as per description of item No 49.00 above but for Figured or pin headed type. Make:- Saint Gobain, Atul, Modi Guard

Supply and fixing mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fixing 35mm thick IInd class hard wood plain framed panelled shutter ( any Nos of panels ) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surface any description over 10cm width or girth, complete all as specified and as directed. Make:- Asian Paint (Apcolite), Nerolac (Nerolac Full Glass), ICI Paint (Dulux Gloss)

S&F steel ventiletor with top hung shutters including hinges,steel peg, peg stay complete with glazing bars.

M&L 10mm thick plaster in one layer in CM (1:4) over concrete roof padding/wall surface, cement mortar mixed with and including WPC as per manufacturers instruction.(Note- WPC Shall be measured and paid separately)

S&F vitreous China Orrissa pan with integral foot rest size 580xmmx440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rests any pattern fixed in repair all as spfd including concrete bedding complete all as spfd and direrected. Make Parryware, Cera, Hindware as approved by GE.

S & F Vitreous China Wash hand basin white, flat back, size 550 x 400 mm excluding taps but including brackets and waste fitting and pipe complete all as specified. Make Parryware, Cera, Hindware as approved by GE.

M & L for PVC (SWR) Multi Floor trap of 75 mm outlet with grating including jointing with solvent cement.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length laid in trenches or floors.

Description same as per item No. 59.00 but fixed on wall complete all as specified and directed.

S&F PVC SWR vent cowl 75mm dia bore complete all as specified and directed.

S&F 150x150mm salt glazed stone ware gully graps square or round mouthed type P all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any lenth with rubber ring joints,laid in trenches or in floor, complete all as spfd and direrected.

S&F PVC (SWR) bends any radius 110mm dia complete all as spfd and direrected.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with asses door complete all as spfd and direrected.

S&F 10 Ltrs capacity PVC flushing cistern of PVC complete all as spfd and direrected.

S&F 15 mm bore steel water tubing med grade galvanised fixed to wall roof floors ceiling etc incl all fittings and fixtures complete all as specified and directed.

S&F 20 mm bore steel water tubing med grade galvanised fixed to wall roof floors ceiling etc incl all fittings and fixtures complete all as specified and directed.

S&F 20mm stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union all as specified.

S&F 15mm angle stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type chromium plated screwed ends for iron pipe or for union all as specified.

S&F bib tap 15mm cast copper alloy bright clutch or butterfly handlw fancy type chromium plated screwed down for iron pipes all as specified and directed.

S&F PVC connection 15mm size pipe 450mm long with PTMT nuts complete all as spefied and directed.

Supply only 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F swivel shower of PTMT any colour for fixing to steel pipe of 15mm bore all as spfd and directed. Make: Symet(minimum weight 40gms) or equivalent make as approved by GE.

S & F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Solid PVC Door framed of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per speceification & drawings

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top raik & bottom rail. Panelling of plain coloujr PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, all as per specified and directed by Engineer-in -Charge

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete: push pull or manual type, all as specified and directed by Engineer-in-Charge.

M & L water proofing treatment on roof surface in following steps through manufacturer / authorised applicator of the manufacturer instructions complete :- (i) Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction parapets, etc, and surface painting, with a layer of blown bitumen of any preparation applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered (area of flashing etc shall be added to the roof area) (ii) Laying APP based polymeric membrane minium weighing 3 kg/sqm and minium 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat of any newly sufaces as directed.

S & F brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make - Cat part No U-0911 of Plumber , Catpart No BAB-400 of Pearl, Cat part No ACN1111NM of Jaquar.

S & F in repair 20mm dia Powder coated curtain rod fixed with modren bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed

M&L for providing pre cast cement concrete 1:2:4 type B1 as in manholes covers and set in CM 1:6

M&L for concrete bed to drain pipe 110mm bore incl packing under and haunching against the side of pipe after they are laid and tested in cement concrete 1:4:8 type D2

S&F butt hinges medium weight cold rolled mild steel and fixed size of hinges in 100mm complete all as specified and directed.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises.

S&F 150 mm long Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI marked all as specified. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly complete all as specified and directed for one light / fan/ bell controlled by one ,one way switch 5/6 Amps. Make :- V Marc, Polycab, Havell's, RR Kabel

Description same all as per item No 89.00 here in before but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch

Description same all as per item No 89.00 here in before but One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed . Make :- V Marc, Polycab, Havell's, RR Kabel

Supply and fixing modular metal flush box 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular metal flush box 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V . Make:- Anchor , Legrand,Crabtree (Havell's)

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F switch socket combination modular type multipurposes 6/16 A, 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S&F switch socket combination modular type multipurposes 6/16 A, 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)

S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Make:-Havells cat part No- cat No :-LUMILINEPLUSBS 20WLED865SPCSS / WIPRO cat part No :- D532065 /Bajaj Cat part No:-112785

S & F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:- Havells Cat No. ENDURACITYLITEPLATPLUSSL 30WLED757SASYBOPC / WIPRO cat part No :-LR02-291-XXX-57-XX / Bajaj Cat part No:-169887

Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified. Make : L&T Cat No :-DBSPN008DD HPL Cat pt No- DBECOTDD08 / Indo Asian Cat No-811806

Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB20400C HPL Cat pt No- TSPNC40 / Indo Asian Cat No-811152

Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB10320C HPL Cat pt No- TSPC6-32 / Indo Asian Cat No-811129

S&F exhaust fan AC single phase 230 volt 300 mm sweep, 900 RPM with louver complete all as specified and directed. Make:- Bajaj Model Supreme Plus Cat No.-70069 / Havells model Turbo Force SP / Usha Model Turbo Heavy Duty

Supply and fixing ceiling fan complete with electronic type regulators and accessories 230 volt, 1200 mm sweep, 5 star rated complete all as specified Make:- Bajaj model speed star Cat No:- 250917, Havells model Velocity HS, Crompton model Aura Prime.

Sub main wiring with 2 x 6 Sqmm, PVC insulated PVC unsheathed stranded FRLS copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 4 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed. Make:- RR Kable, Havells India, Polycab

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

S & laying reinforced precast concrete cable cover class LV, type 1 flat, size 250x150mmx40mm.

Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 16 sqmm, 2 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls/ on poles/ in ducts/ in GI pipes etc including taking down existing complete all as directed at site. Make:- Finolex,RPG(Asian),RR Kable, Universal

M & L for two coats of synthetic enamel paint over a coat of pink primer including prepration of new wood and wood based surface, over 10 cm width or girth complete all as specified and as directed.

Miittal Construction

M/s Himgiri construction

GEETANJALI CONSTRUCTIONS

M/s Gupta Constructions

M/S UnitedConstruction