Work of day-to-day maintenance of overhead HT / LT line and its related work at the township of Gevra area for the period of 730 days.

Amount

Erection of metallic pole 10 mtr. up to 16 mtr in cement concreate 0.3 cmt/pole, 1:3:6(1 cement:3coares:6graded stone) foundation including excavation and refilling etc. as required as per instruction of Engr.Inc. (Only Poles will be provided by SECL.)

Supplying & Erection of stay set complete(Galvanised) in cement concreate 0.2 cmt/stay, 1:3:6(1 cement:3coares:6graded stone) foundation including excavation and refilling etc. as required as per instruction of Engr.Inc. .

Erection of angle Iron/channel iron cross arm on wood RCC/PCC/Steel pole etc. as required for one span Guarding ( 1 set = 2 cross angle) ( Iron/channel will be provided by SECL.)

Erection of double pole(DP) 3 wire cross arm for over head lines as required.(Only Angle/Channel will be provided by SECL )

Providing & Fixing of Shackle insulator 1.1KV, 100x110 mm with suitable GI Bolt and hardware including binding etc. as required.

Erection of ACSR, Rabbit conductor including binding etc. as required ( One wire/KM). (Only conductor will be provided by SECL)

Erection of ACSR, Dog conductor including binding etc. as required ( One wire/KM). (Only conductor will be provided by SECL)

Providing & Erection of G.I.Wire no. 8 SWG including binding etc. as required. For earth continuity .

Dismantling of Over Head lines. A) Dismantling and lowering of conductor, Insulator, Brackets etc. B) Uprooting of poles & transporting it to the road side. C) Transportation of material other than poles to road side(Brackets, Insulator, Clamp and conductors).

Fabrication and Erection of angle iron/channel iron crass arm suitable size for pole with clamp as required. (Suitable for 3 wire in HT line and 5 wire in LT line ) or as per instruction of Engineer incharge.

Providing & Fixing of straight through cable jointing 3.3 KV grade( 95 to 150 sq.mm) with all material for removal of temporary joint with all accessories

Straight through cable jointing kit with heat shrinkable kit with ferrules for 4x120 sq.mm 1.1 KV grade cable , with all accessories

Fixing Charge Of Above Item having Serial No-12

Straight through cable jointing kit with heat shrinkable kit with ferrules for 4x185 sq.mm 1.1 KV grade cable , with all accessories

Fixing Charge Of Above Item having Serial No-14

Straight through cable jointing kit with heat shrinkable kit with ferrules for 4x240 sq.mm 1.1 KV grade cable , with all accessories

Fixing Charge Of Above Item having Serial No-16

11 KV pin insulator with pin washers and nuts, with all accessories

Fixing Charge Of Above Item having Serial No-18

11 KV Disc insulator with hardware , with all accessories

Fixing Charge Of Above Item having Serial No-20

Erection of Disc/Pin insulator including binding ets. As required

Galvanised insulator hardware fitting ball and socket type with strain clamps, bolts, nuts & washers, with all accessories (suitable for stringing conductor with disc insulator)

Fixing Charge Of Above Item having Serial No-23

Outdoor type busbar with steel sheet encloser 4 pole 400 amps. 415V with complete in all respect.

Fixing Charge Of Above Item having Serial No-25

Air Break switch 3 pole , 800 amp, 11 KV grade( complete set with all accessories ) vertical type for overhead line.

Fixing Charge Of Above Item having Serial No-27

ML 4 Power Contactor ( 3 Pole, auxiliary contact with 2 NO + 2 NC. The current (ac-1) will have 100 Amp.)

Fixing Charge Of Above Item having Serial No-29

Digital timer for street light with all respect as per instruction of Engineer I/C.

Fixing Charge Of Above Item having Serial No-31

Fixing Charge Of Above Item having Serial No-33

PVC tape 18 mm self adhesive for electrical insulation work

Fixing Charge Of Above Item having Serial No-35

Rubber tape (kachcha rubber)for cable repairing/jointing work

Fixing Charge Of Above Item having Serial No-37

LED rope light (three colour red,yellow,green)

Fixing Charge Of Above Item having Serial No-39

Dismantling/lowering and fixing of HPSV 400W/ HPSV 250W/HPSV 150W/CFL 85W/LED 25 watt to 190 watt street lights Fitting from different location at colony power supply

Cleaning , painting of pole various size (11 mtr., 13 mtr, 16 mtr, ) average hight 13 mtr. With brackets of different HT & LT overhead lines (1 coat of red oxide & 2 coat of AL. paint and 3 no. one foot wide strips of red paint from ground level up to 1.5 mtr. of reputed make)( paint will be provided by contactor)

Providing & Fixing of Lighting arrester system 3.3KV , 3 Phase (complete set with all accessories)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and fixing of (cradle)guarding between the span of 50 to 60 mtrs. (material - 8 SWG Galvanized Iron Wire)as per rules & regulations

Shifting of Pole(including loading & un loading )

Providing and fixing of anti climbing device/barbed wire protection of LT overhead line poles for protection of light fittings. The barbed wire fencing will be up to a length of 3 meter per pole and welded at each end by iron angle cleats for retaining the barbed wire coil on the pole body. All materials like barbed wire, gas and cutting set, welding electrodes and DG operated portable welding machine shall be in the scope of the contractor, Iron materials (MS angle for cleats) shall be provided by the department)

Fabrication of Transformer shed & shifting of Transformer. (A) Structural steel work riveted bolted or welded in built up section trusses and framed work including cutting ,hoisting, fixing in position and applying a primer coat of approved steel primer ,all complete (All iron structure work included labour charges )(Pole will be provided by SECL) (Quantity - 0.58 Te.) (B) Providing corrugated GI sheet roofing including vertical/curved surface fixed with polymer"J" and "I" hooks, bolts and nuts 8 mm dia. With bitumen and GI limpet washer fitted with white led and including a coat of approved paint on lapping of steel( 0.63 mm thick with zinc coating not less than 275 gm/sq.m) (all items will be provided by contractor)(Quantity - 130.2 sq.MM) (C) Providing and laying of cement concrete of specified grade excluding the cost of centring and shuttering. All work up to plinth level ratio 1:3:6(1 cement, 3 course sand, 6 graded stone aggregate 20 mm nominal size) (all items will be provided by contractor)(Quantity - 12 Cu.m) (D)Brick work using CB CM 1:6 in foundation (36 x 0.5 x 0.3 mtr = 5.4 cum) (all items will be provided by contractor) (Quantity - 12.2 Cu.m (E) 12 mm thick cement plaster 1:6 (36 x 0.5 = 18 sq.m) (all items will be provided by contractor)(Quantity - 24 sq.mtr)

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required

Supplying, Fabrication and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV/LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. or as per instruction of Engineer I/C.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable up to 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 120 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable up to 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 120 sq. mm and Upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or as per instruction of Engineer I/C. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or as per instruction of Engineer I/C. Above 35 sq. mm and Upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or as per instruction of Engineer I/C. Above 95 sq. mm and Upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required or as per instruction of Engineer I/C. Above 185 sq. mm and Upto 400 sq. mm

Providing of Aluminium lugs 35 sq.mm, Diameter of the bore - 10.5 mm, Inner Diameter of the cable inclusion- 8 mm, Flange width - 20mm, Length to middle of the bore - 67mm

Fixing Charge Of Above Item having Serial No-59

Providing of Aluminium lugs 70 sq.mm - 10.5 mm, Diameter of the bore - 11.5mm, Inner Diameter of the cable inclusion - 28mm, Length to middle of the bore - 84mm

Fixing Charge Of Above Item having Serial No-61

Providing of Aluminium lugs 95 sq.mm, Diameter of the bore - 13mm, Inner Diameter of the cable inclusion - 13.2mm, Flange width - 32mm, Length to middle of the bore - 90mm

Fixing Charge Of Above Item having Serial No-63

Providing of Aluminium lugs 120 sq.mm, Diameter of the bore - 13mm, Inner Diameter of the cable inclusion - 14.7mm, Flange width - 32mm, Length to middle of the bore - 98mm

Fixing Charge Of Above Item having Serial No-65

Providing of Aluminium lugs 150 sq.mm, Diameter of the bore - 13mm, Inner Diameter of the cable inclusion - 16.3mm, Flange width - 35mm, Length to middle of the bore - 104mm

Fixing Charge Of Above Item having Serial No-67

Providing of Aluminium lugs 185 sq.mm, Diameter of the bore - 13mm, Inner Diameter of the cable inclusion - 18.5mm, Flange width - 40mm, Length to middle of the bore - 109mm

Fixing Charge Of Above Item having Serial No-69

Providing of Aluminium lugs 240 sq.mm, Diameter of the bore - 17mm, Inner Diameter of the cable inclusion - 21.5mm, Flange width - 46mm, Length to middle of the bore - 119mm

Fixing Charge Of Above Item having Serial No-71

16 mm X 50 mm bolts and nuts with washers (Cadmium Polish)

Fixing Charge Of Above Item having Serial No-73

16 mm X 40 mm bolts and nuts with washers(Cadmium Polis)

Fixing Charge Of Above Item having Serial No-75

16 mm X 125 mm bolts and nuts with washers (G.I)

Fixing Charge Of Above Item having Serial No-77

16 mm X 150 mm bolts and nuts with washers (G.I)

Fixing Charge Of Above Item having Serial No-79

10 mm X 25 mm long tinned brass bolt with nut etc.

Fixing Charge Of Above Item having Serial No-81

Total impact of GST for the purpose of CTC

DUCK CONSTRUCTION COMPANY

R.R. ENGINEERS AND SURVEYORS

KAPISH POWER CONSTRUCTION PRIVATE LIMITED

Universal MEP Projects & Engineering Services Limited