Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.1 LAccepted-Finance | 1 | Accepted-Finance Eligible |
Tender Value
₹3.8 L
EMD Value
₹7,594
Closing Date
1 Oct 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER E
Office of Executive Engineer E BSNL Electrical Division 1st Floor K K Nagar Telephone Exchange Madurai 625020
Conversion of HT Supply in to LT Supply in TE Virudhunagar
2022_BSNL_129628_1
14 /EEE/ BSNL/ ED / MA / 2022-23
Open Tender
Electrical Works
Item Rate
60 days
VIRUDUNAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer Cash O/o GM BSNL
₹7,594
6 Oct 2022
20 Sept 2022
3 Oct 2022
20 Sept 2022
1 Oct 2022
20 Sept 2022
SITC of prefabricated three compartment metering box fabricated out of 18 SWG MS Sheet i/c TPN Busbars of 250 A capacity & a seperate Fuse cut out Box, suitable for providing CT metering service with all accessories listed below, strictly in accordance with the TNEB specifications approved by the MRT wing of TNEB, complete with control wiring with 1.5 Sq.mm / 4 Sq.mm copper wires, Current transofrmers 200/5 A - 3 Nos., Test terminal block, HRC fuse link, Bakellite fuse unit, FT Switch etc., i/c sign writting etc ., complete as required. [ Approx. Size : 1.2 Mtrs (H) X 0.83 Mtrs (W) X 0.3 Mtrs (D) ]
Supplying and laying of 3½ X 120 sq.mm PVC insulated and PVC sheathed / XLPE Armoured aluminium UG power cable of 1.1 KV grade in the following manner i/c transportation to site etc., complete as required. a) In Existing GI pipe
b) Existing trench / Cable tray / Loose looping etc.,
c) On surface of wall
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3½ C X 120 sq. mm (50mm)
S/F Following Items in the aerial cut out board i/c interconnections etc., as required a) 300 A Busbar type porcelain fuse cut outs (Make :- TANGEDCO Approved )
b) 150 A Neutral link
S/F 10 mm thick hylam sheet i/c cutting, making holes as reqd.
S/F bimetalic clamp to terminate the service connection wire in the EB pole as reqd.
Supplying and drawing of 4 Runs X 70 sqmm PVC insulated, PVC round sheathed copper conductor Wire for Service connection in the following manner as reqd. a) in O/H arrangement with 2 Nos GI bearer wires and reel insulators
b) In Existing GI Pipe
c) In Loose looping
S/L 75 mm dia B class GI pipe & accssories for protection of 4 x 70 sq. mm S/C Wire / power cable in the following manner etc., as required. a) On surface of wall / EB pole i/c Providing suitable clamping etc as reqd.
b) In U/G for road crossing but excluding digging / refilling / cement plastering etc.,
S/L 100 mm dia B class GI pipe & accssories for protection of Power cable / copper wire in the following manner etc., as required. a) On surface of wall / EB pole i/c Providing suitable clamping etc as reqd.
b) In U/G for road crossing but excluding digging / refilling / cement plastering etc.,
Removing of existing 250 A / 400 A TPN switch fuse unit along with fuses from capacitor panel / LT Panel and refixing at EB meter board / cut out chamber i/c connection etc as reqd.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit / submain wiring / cable as required.
Providing and fixing adoptor box made of 16 SWG MS sheet for the existing TPN / change over switch for accomodating loose wire i/c cutting, welding powder coated painting, sign writing etc as required.
Removing the HT supply and terminations at HT pole, HT panel incomer and Transformer 1 & 2, LT temination Bus duct assembly (2 nos) at LT panel as per site requirement complete as reqd.
Providing concrete Road / Floor cutting work for road crossing / laying 100 / 75 mm dia GI pipe for protection of power cable and make the damages in good condition with cement mortor and curing work as reqd.
Supplying and making end termination with copper lugs for 4 Nos. of 70 sq.mm PVC insulated, PVC round sheathed copper conductor Wire etc as required.
Providing MS frame work/supports/roofing frame work etc fabricated with the following members i/c cutting, welding, drilling holes, required machine shop work, grouting, painting etc as required (EB Meter board stand/Rain shade arrangement ) a) 35 mm x 35 mm x 5 mm MS angle
b) 35 x 5 mm MS flat
S/F 0.45 mm thickness X width 1072 mm X length 3050 mm, colour coated steel sheet on the existing frame work i/c bolts, nuts, washers etc as reqd (Make:-TATA Durashine or similar superior make)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .