Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.2 Cr
EMD Value
₹4.3 L
Closing Date
26 Oct 2026, 12:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
W1
17 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Balance Sheet and all other Financial documents attested/certified by the Chartered Accountant (CA) to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN failing which the offer shall be considered as incomplete and will be summarily rejected without any further reference.
As Per Clause No. 10 of IR GCC-2022, For participating in tender,The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(A)Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or (B) Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or (C) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender).
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any c i v i l engineering w o r k involving construction of building/quarters/any other work involving RCC work.
10 conditions · 4 needing a document upload
Experience, financial status and ability: Tenderer is required to submit documents detailed here under for evaluation of his credentials.
Employment/Partnership etc. of Retired Railway Employees.:- The tenderer has to give required information regarding association of Retired Railway Employees either as Employee or Partnership etc. in the per-forma as enclosed Annexure-I to this chapter of this tender document as per clause No. 16(a) of IR GCC-2022.
List of works completed & in hand: Tenderer is required to submit, along with his tender, particulars of all works completed by him including works in hand for the Railways or for any other client in the Per-forma enclosed as Annexure-II to this chapter of this tender document. Figures of cost shall not include cost of materials supplied free of cost by the client to the contractor. The tender without this information may be treated as if the tenderer has no works in hand. Supportive documents from the organizations with which the tenderer is workings should be enclosed giving description of work, contract value, date of award, approximate date value of balance work.
List of court cases and arbitration cases: Tenderer is also required to submit, along with his tender, list of arbitration's demanded from any clients during the last five years preceding the date of opening of this tender as per Annexure-III/A to this chapter of this tender document. The tenderer is also required to submit, along with his tender, list of court cases filed against any clients during the last five years preceding the date of opening of this tender as per Annexure-III/B to this chapter of this tender document.
List of plant and machinery: Tenderer has to make his own arrangements for execution of works. The tenderer is required to submit, along with his tender, list of plant and machinery available on hand (own) and proposed to be inducted (own and hired to be given separately) for the subject work in Proforma given in Annexure-IV to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no plant and machinery available on hand (own) and that no plant and machinery are proposed to be inducted for the subject work.
List of personnel and organization: Tenderer is required to submit, along with his tender, list of Personnel and organization available on hand (own) and proposed to be engaged for the subject work in Proforma given in Annexure-V to this chapter of this tender document. The tender without this information may be treated as if the tenderer has no personnel and organization and that no personnel and organization are proposed to be engaged for the subject work.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per clause no. 14 of GCC-2022, The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (A)HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (B)Partnership Firm: (i)A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (C)Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (D)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E)Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society.
Undertaking:- An undertaking regarding not blacklisted or debarred by Railway or any other Ministry/Department of the Govt. of India from participation in tender/contracts on date of opening of bids to be submitted by all partner/member in case of partnership firm/LLP as per clause 14 of GCC 2022. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract.
As per clause No. 15 of GCC-2022, The tenderer whether sole proprietor / a company or a partnership firm /registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required.
At MFP - Construction of Staff Quarters 02 units Type-III and 04 units Type-IV on replacement account.
TC-147-2026-SPJ~ECR
TC-147-2026-SPJ
Open
Works - General
12 Months
Samastipur, Bihar
₹0
₹4.3 L
30 Sept 2026
30 Sept 2026
12 Oct 2026
182 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 250 | 177.5 | 44,375 |
| 2 | All kinds of soil. | cum | 80 | 260.3 | 20,824 |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 200 | 196 | 39,200 |
| 4 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 75 | 700.5 | 52,537.5 |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 30 | 2,123.75 | 63,712.5 |
| 6 | All kinds of soil | Sqm | 100 | 34.15 | 3,415 |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 25 | 7,878.5 | 1,96,962.5 |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 9 | 7,294.7 | 65,652.3 |
| 9 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 1.25 | 9,895.2 | 12,369 |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm | 27 | 495.75 | 13,385.25 |
| 11 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | per bag of 50 kg cement used | 20 | 18.15 | 363 |
| 12 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | Sqm | 10 | 146.15 | 1,461.5 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 20 | 9,045.75 | 1,80,915 |
| 14 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 6.5 | 10,852.95 | 70,544.18 |
| 15 | cum | 35 | 11,505.5 | 4,02,692.5 | |
| 16 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 325 | 392.15 | 1,27,448.75 |
| 17 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 38 | 842.5 | 32,015 |
| 18 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 682 | 927.25 | 6,32,384.5 |
| 19 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 328 | 736.4 | 2,41,539.2 |
| 20 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 350 | 961.3 | 3,36,455 |
| 21 | Stairs, (excluding landings) except spiral- staircases | Sqm | 110 | 764.95 | 84,144.5 |
| 22 | Under 20 cm wide | Metre | 75 | 208.55 | 15,641.25 |
| 23 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 30 | 951.1 | 28,533 |
| 24 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 2.5 | 10,585.9 | 26,464.75 |
| 25 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 10000 | — | 107.85 | 10,78,500 |
| 26 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg 8000 | — | 107.85 | 8,62,800 |
| 27 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. | Metre | 75 | 78.4 | 5,880 |
| 28 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 68 | 9,504.75 | 6,46,323 |
| 29 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 165 | 9,860.4 | 16,26,966 |
| 30 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 77 | 733.5 | 56,479.5 |
| 31 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum 39.25 | — | 7,132.25 | 2,79,940.81 |
| 32 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 85 | 9,105.95 | 7,74,005.75 |
| 33 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 10 | 905.05 | 9,050.5 |
| 34 | Cement mortar 1:3 (1 cement :3 coarse sand) | Sqm | 215 | 1,150.5 | 2,47,357.5 |
| 35 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 15 | 1,123.8 | 16,857 |
| 36 | Area of slab over 0.50 sqm | Sqm | 7 | 3,078.4 | 21,548.8 |
| 37 | Area of slab upto 0.50 sqm | Sqm | 6 | 5,413.5 | 32,481 |
| 38 | Area of slab over 0.50 sqm | Sqm | 20 | 5,136.3 | 1,02,726 |
| 39 | Granite work | Metre | 32 | 510.95 | 16,350.4 |
| 40 | Each | 16 | 978.7 | 15,659.2 | |
| 41 | 18 mm thick Italian Marble stone slab, Perlato, Rosso Verona, Fire Red or Dark Emperador etc. | Sqm | 25 | 10,414.8 | 2,60,370 |
| 42 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 165 | 1,267.95 | 2,09,211.75 |
| 43 | Kiln seasoned and chemically treated hollock wood | cum | .9 | 83,378.05 | 75,040.25 |
| 44 | 4 mm thick glass pane (weight not less than 10kg/sqm). | Sqm | 15 | 2,241.8 | 33,627 |
| 45 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | Sqm | 12.5 | 2,600.45 | 32,505.63 |
| 46 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading | Sqm | 30 | 1,800.45 | 54,013.5 |
| 47 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 72 | 2,392.65 | 1,72,270.8 |
| 48 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 228 | 2,172.1 | 4,95,238.8 |
| 49 | On one side only | Sqm | 144 | 478 | 68,832 |
| 50 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 25 | 462.35 | 11,558.75 |
| 51 | Fixed to steel windows by welding | Kg | 750 | 219.1 | 1,64,325 |
| 52 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 275 | 238.35 | 65,546.25 |
| 53 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Each | 408 | 228.85 | 93,370.8 |
| 54 | 300x16 mm | Each | 44 | 216.55 | 9,528.2 |
| 55 | 250x10 mm | Each | 24 | 83.9 | 2,013.6 |
| 56 | 100 mm | Each | 120 | 32.55 | 3,906 |
| 57 | 125x64x1.90 mm | Each | 240 | 118.2 | 28,368 |
| 58 | 75x47x1.80 mm | Each | 112 | 80.05 | 8,965.6 |
| 59 | 250x16 mm | Each | 20 | 260.6 | 5,212 |
| 60 | 250x10 mm | Each | 16 | 115.15 | 1,842.4 |
| 61 | 125 mm | Each | 20 | 66.25 | 1,325 |
| 62 | Twin rubber stopper | Each | 30 | 72.35 | 2,170.5 |
| 63 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 125 | 492.7 | 61,587.5 |
| 64 | 30 mm thick plain PVC door shutters | Sqm | 71 | 3,182.95 | 2,25,989.45 |
| 65 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm ( +/- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. | Metre | 22 | 573.45 | 12,615.9 |
| 66 | Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m). | Sqm | 21.6 | 8,799.25 | 1,90,063.8 |
| 67 | Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height above 1.8m). | Sqm | 23 | 9,628.6 | 2,21,457.8 |
| 68 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. | Each | 24 | 231.05 | 5,545.2 |
| 69 | Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete. | Each | 50.5 | 115.8 | 5,847.9 |
| 70 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 60 | 2,829.25 | 1,69,755 |
| 71 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in-charge. | Sqm 267.84 | — | 2,593.15 | 6,94,549.3 |
| 72 | 200 mm | Each | 8 | 186.65 | 1,493.2 |
| 73 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | Each | 24 | 272 | 6,528 |
| 74 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in- charge. | ONE SET | 16 | 885.1 | 14,161.6 |
| 75 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | Kg | 100 | 533.25 | 53,325 |
| 76 | Providing and fixing 2 mm thick 16 to 19 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in- charge. | Metre | 25 | 43.8 | 1,095 |
| 77 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 750 | 133.7 | 1,00,275 |
| 78 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 3.78 | 11,439.6 | 43,241.69 |
| 79 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 3 | 5,804.35 | 17,413.05 |
| 80 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Kg | 105 | 141.7 | 14,878.5 |
| 81 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | Kg | 100 | 195.2 | 19,520 |
| 82 | Hot finished welded type tubes | Kg | 580 | 194.4 | 1,12,752 |
| 83 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. | Each | 16 | 220.65 | 3,530.4 |
| 84 | M.S. tube | Kg | 180 | 196.8 | 35,424 |
| 85 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 480 | 772.4 | 3,70,752 |
| 86 | Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides | Sqm | 65 | 1,133.55 | 73,680.75 |
| 87 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. | Kg | 180 | 130.5 | 23,490 |
| 88 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. | Sqm | 580 | 792.05 | 4,59,389 |
| 89 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 180 | 614.2 | 1,10,556 |
| 90 | 18 mm thick | Sqm | 65 | 662.05 | 43,033.25 |
| 91 | 25 mm thick | Sqm | 25 | 1,948.25 | 48,706.25 |
| 92 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 15 | 2,354.7 | 35,320.5 |
| 93 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 40 | 1,096.55 | 43,862 |
| 94 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 60 | 1,439.4 | 86,364 |
| 95 | Size of Tile 600x600 mm | Sqm | 80 | 1,553.45 | 1,24,276 |
| 96 | Size of Tile 600 x 1200 mm | Sqm | 225 | 1,577.15 | 3,54,858.75 |
| 97 | In 75x75 mm deep chase | Metre | 100 | 305.15 | 30,515 |
| 98 | 110 mm diameter | Metre | 270 | 377.4 | 1,01,898 |
| 99 | 110 mm | Each | 10 | 136.15 | 1,361.5 |
| 100 | 110x110x110 mm | Each | 5 | 221.35 | 1,106.75 |
| 101 | 110 mm bend | Each | 60 | 150.35 | 9,021 |
| 102 | 110 mm | Each | 40 | 371.3 | 14,852 |
| 103 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 36 | 738.65 | 26,591.4 |
| 104 | 1:6 (1 cement: 6 fine sand) | Sqm | 380 | 333.35 | 1,26,673 |
| 105 | 1:4 (1 cement: 4 coarse sand) | Sqm | 315 | 357.35 | 1,12,565.25 |
| 106 | 1:6 (1 cement: 6 coarse sand) | Sqm | 480 | 343.65 | 1,64,952 |
| 107 | 1:4 (1 cement: 4 coarse sand) | Sqm | 450 | 411.75 | 1,85,287.5 |
| 108 | 1:3 (1 cement: 3 fine sand) | Sqm | 280 | 439.25 | 1,22,990 |
| 109 | 1:4 (1 cement: 4 fine sand) | Sqm | 25 | 425.55 | 10,638.75 |
| 110 | Neat cement punning. | Sqm | 208 | 79.95 | 16,629.6 |
| 111 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 700 | 262.7 | 1,83,890 |
| 112 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm 1500 | — | 185.65 | 2,78,475 |
| 113 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 75 | 116.9 | 8,767.5 |
| 114 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 615 | 160.6 | 98,769 |
| 115 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 300 | 193.7 | 58,110 |
| 116 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 40 | 176.25 | 7,050 |
| 117 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 25 | 170.7 | 4,267.5 |
| 118 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | Sqm | 75 | 74.65 | 5,598.75 |
| 119 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 100 | 67.4 | 6,740 |
| 120 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 348 | 226.25 | 78,735 |
| 121 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 480 | 156.05 | 74,904 |
| 122 | Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. | Each | 12 | 563.9 | 6,766.8 |
| 123 | 20 mm diameter. | Metre | 60 | 343.5 | 20,610 |
| 124 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 75 | 263.95 | 19,796.25 |
| 125 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 12 | 6,767.4 | 81,208.8 |
| 126 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 6,515.55 | 13,031.1 |
| 127 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 8 | 6,258.75 | 50,070 |
| 128 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | Each | 4 | 2,226.35 | 8,905.4 |
| 129 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 12 | 3,960.55 | 47,526.6 |
| 130 | 610x510 mm bowl depth 200 mm | Each | 6 | 4,940.8 | 29,644.8 |
| 131 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. | Each | 12 | 1,034.8 | 12,417.6 |
| 132 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality and make as approved by Engineer in charge.(a) 15 mm nominal dia | Each | 12 | 6,940.75 | 83,289 |
| 133 | 32 mm dia | Each | 18 | 103.9 | 1,870.2 |
| 134 | Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. | Each | 12 | 55.65 | 667.8 |
| 135 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 12 | 1,607.95 | 19,295.4 |
| 136 | Rectangular shape 453x357 mm | Each | 2 | 1,361.8 | 2,723.6 |
| 137 | C.P. brass | Each | 12 | 803.7 | 9,644.4 |
| 138 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | Metre | 40 | 1,180.75 | 47,230 |
| 139 | For 100 mm dia pipe | Each | 16 | 362.85 | 5,805.6 |
| 140 | Sand cast iron S&S as per IS - 3989 | Each | 24 | 705.2 | 16,924.8 |
| 141 | Sand cast iron S&S as per IS - 1729 | Each | 14 | 626.95 | 8,777.3 |
| 142 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms | Each | 6 | 115.3 | 691.8 |
| 143 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 4 | 673.4 | 2,693.6 |
| 144 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 16 | 708.95 | 11,343.2 |
| 145 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. | Each | 8 | 18,212.9 | 1,45,703.2 |
| 146 | 15 mm nominal dia Pipes | Metre | 50 | 497.8 | 24,890 |
| 147 | 20 mm nominal dia Pipes | Metre | 30 | 537.6 | 16,128 |
| 148 | 25 mm nominal dia Pipes | Metre | 60 | 627.25 | 37,635 |
| 149 | 15 mm nominal dia Pipes | Metre | 75 | 244.7 | 18,352.5 |
| 150 | 20 mm nominal dia Pipes | Metre | 50 | 274.3 | 13,715 |
| 151 | 25 mm nominal dia Pipes | Metre | 80 | 355.4 | 28,432 |
| 152 | 50 mm nominal dia Pipes | Metre | 60 | 794.25 | 47,655 |
| 153 | 15 mm dia nominal bore | Metre | 25 | 366.4 | 9,160 |
| 154 | 20 mm dia nominal bore | Metre | 50 | 437.3 | 21,865 |
| 155 | 40 mm dia nominal bore | Metre | 70 | 617.05 | 43,193.5 |
| 156 | 25 to 40 mm nominal bore | Each | 2 | 911.9 | 1,823.8 |
| 157 | 50 to 80 mm nominal bore | Each | 2 | 1,785.35 | 3,570.7 |
| 158 | 15 mm nominal bore | Each | 16 | 353.25 | 5,652 |
| 159 | 15 mm nominal bore | Each | 16 | 353.25 | 5,652 |
| 160 | 25 mm nominal bore | Each | 4 | 622.4 | 2,489.6 |
| 161 | 20 mm nominal bore | Each | 24 | 539.95 | 12,958.8 |
| 162 | 40 mm nominal bore | Each | 2 | 826.1 | 1,652.2 |
| 163 | 150 mm diameter | Each | 16 | 222.35 | 3,557.6 |
| 164 | 20 mm nominal bore | Each | 22 | 346.8 | 7,629.6 |
| 165 | 40 mm nominal bore | Each | 4 | 631.3 | 2,525.2 |
| 166 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per 4000 Litre | — | 11 | 44,000 |
| 167 | 15 mm nominal bore | Each | 20 | 798.95 | 15,979 |
| 168 | 15mm nominal bore | Each | 20 | 574.3 | 11,486 |
| 169 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 6 | 125.6 | 753.6 |
| 170 | 100 mm nominal dia | Each | 16 | 37.6 | 601.6 |
| 171 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms | Each | 6 | 257.6 | 1,545.6 |
| 172 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms | Each | 2 | 523.8 | 1,047.6 |
| 173 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms | Each | 6 | 156.9 | 941.4 |
| 174 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 2 | 121.4 | 242.8 |
| 175 | 15 mm nominal bore with 45 cm length | Each | 18 | 121.9 | 2,194.2 |
| 176 | 25mm nominal bore, weighing not less than 62 gms | Each | 2 | 113.35 | 226.7 |
| 177 | 200 mm diameter | Metre | 40 | 970.35 | 38,814 |
| 178 | 200 mm diameter S.W. pipe | Metre | 35 | 1,375.45 | 48,140.75 |
| 179 | 300 mm dia. R.C.C. pipe | Metre | 30 | 994.3 | 29,829 |
| 180 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 4 | 26,861.9 | 1,07,447.6 |
| 181 | 300 mm dia piles | Metre | 380 | 3,065.6 | 11,64,928 |
| 182 | 300 mm dia piles | Each | 132 | 2,626.3 | 3,46,671.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREItoVforIREPS_2.pdf
ATTACHMENT
JPOCircular.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
Annexure-VIA.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .