ADDITION/ALTERATION TO CERTAIN MARRIED ACCOMMODATION AT SHILLONG UNDER GE SHILLONG

Amount

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down of chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames complete all as specified and directed.

Taking down shutters of any description nexc 1.0 Sqm and refixing in same opening complete all as specified and as directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm and refixing in same opening complete all as specified and as directed.

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as specified and as directed.

Taking down shutters of any description nexc.1.0 Sqm each complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Demolition and breaking up drain pipes 150mm dia (salt glaged stone ware AC or reinforced concrete pipe set in cm) complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

Dismantling boarding any description fixed in any position with nails complete all as specified and directed

Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards 600mm x 600mm fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete all as specified and directed.

S&F anodised aluminum snap grid frame work for false ceiling comprising of GI perimeter channel 0.55mm thick with aluminium main T-flange of 25 mm and web of 30mm fixed to surrounding wall angle with flange with flange and web 25mm each, cross T, Main T suspended from soffit @ 1200mm C/C using GI wire mesh of 4mm thickness, aluminium frame will be 600mmx600mm to receive ceiling board complete all as specified and as directed

S&F 2nd class hard wood boarding 20mm thick fixed with nails in eaves board plained both side with butt joint complete all as specified and as directed

M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and as directed

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and as directed

S&F 35 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed

S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F 18/19 mm thick block boards grade 1 quality exterior grade commercial type, fixed with screws to timber frame complete all as specified and as directed .

S&F 12 mm thick block boards grade 1 quality exterior grade commercial type, fixed with screws to timber frame complete all as specified and as directed .

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and as directed

S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed

S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed

S&F extruded fancy type Brass handles fabricated type polished of size 150 mm complete all as specified and as directed

S&F butt hinges 100 mm extruded with mild steel hinge complete all as specified and as directed

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and as directed

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in complete all as specified and as directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and fixing; also fastening conforming to grade Fe.290.Gde-E-165 complete all as specified and directed

S&F framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work or water tanks and similar work conforming to Fe 290 gde E 165 complete all as specified and directed

S&F powder coated (min thickness of powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) aluminium sliding door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and as directed

Supply and fixing powder coated (minimum thickness of powder coatin 50micron) aluminium sliding window and ventilator shutters, section weighting 0.55Kg/Sqm including necessary joining cleats, glazing clips, rubber neoprene packing handle (2no.) in each shutter complete all as specified and directed

M&L for solar control film/ film with geometric design 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed

S&F aluminium guide rail three track having two PVC wheel 50 mm dia for smooth functioning of cupboard/door shutter approx length 1.60 mtr complete all as specified and as directed

S&F compacted recessed handle of size 150 mm suitable for sliding door complete all as specified and as directed

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed

M&L for 4.80 mm thick sheet glass ordinary quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed

M&L for Prelaminated particle board of 9 mm thk board ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing , white lamination , fixed with screws to timber frame work complete all as specified and as directed

M&L Precast cement concrete block masonry type C-1, 1:3:6 (using 20 mm graded stone aggregate) with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 including necessary formwork and moulds complete all as specified and directed.

M&L Precast cement concrete block masonry type C-1, 1:3:6 (using 20 mm graded stone aggregate) with solid blocks, 10 cm in width and setting in cement mortar 1:4 including necessary formwork and moulds complete all as specified and directed.

M & L 75mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in subfloors of floor to receive floor finishes complete all as specified and directed.

M&L Vitrified Ceramic tiles (light shade )9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n. exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick 1:4 screed bed complete all as specified and directed.

M&L Vitrified Ceramic tiles (light shade )9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n. exceeding 0.42 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirtings, dados and risers to steps etc. laid over and including. 10mm thick 1:4 screed bed complete all as specified and directed.

M & L Glazed ceramic Coloured Tile of size 600mm x 300mm x 7-8mm thick in vertical surface Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 .complete all as specified and directed.

M&L for joint free ceramic coloured tiles (400x400mm) x 7-8mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) complete all as specified and directed.

M&L for joint free ceramic coloured tiles (400x400mm) x 7-8mm thick, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes in CM (1:4) complete all as specified and directed.

M&L for Non Skid Coloured Joint less Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4) complete all as specified and directed.

M&L for non skid ceremic Coloured Joint less tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:4 complete all as specified and directed.

M&L for non skid ceremic Coloured Joint less tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.38 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including10 mm thick cement screed bed in CM 1:4 complete all as specified and directed.

M&L for 18 to 20 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforma and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of stone including rounding and moulding of edge and making hole for cooking gas pipe including dismantling the existing slab complete all as specified and directed.

Labour only for chamfer, splays or arris in facework of Granite not exc 15mm wide complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (10+5mm)on fair faces of brick work or concrete surface of walls with top layer mixed with water proofing compound and finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface of walls finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 5mm thick on fair faces of ceiling surfaces in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed

S&F in repairs 20 mm dia harrison rails, mild steel with fixing brackets stops, rollers etc complete all as specified and directed

S&F in repairs 20 mm dia double rod brackets stops including finials, rollers etc wooden finished complete all as specified and directed

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing.

S&F Bib taps, cast copper alloy fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 365mm x 655mm x 765mm of make Jaquar Cat Part No LYS-WHT-38851PSM or equivalent in Cera/Parryware/Hindware complete all as specified and directed

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaquar Cat Part No AKP-35781 PS or equivalent in Marc/Parryware/Prayag complete all as specified and directed

S&F in repairs vitreous China clay table top round shape WHB of size 480x480x135 mm of make Jaquar Cat Part No OPS-WHT-15901N including waste coupling of make Jaquar Cat Part No ALD-727 or equivalent in Hindware/Cera/Parryware complete all as specified and directed

S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaquar Cat Part No ORP-10041PM or equivalent in Marc/Parryware/Prayag complete all as specified and directed

S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No KUP35005BPM or equivalent in Marc/Parryware/Prayagcomplete all as specified and directed

S&F in repair single lever basin mixer without popup waste with 450 mm long braided hoses of make Jaquar Cat Part No KUP-35011BPM or equivalent in Marc/Parryware/Prayag complete all as specified and directed

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaquar Cat Part No ALD-565- or equivalent in Marc/Parryware/Prayag complete all as specified and directed

S&F in repairs Soap dish holder of make Jaquar Cat Part No AKP-35731P or equivalent in Marc/Parryware/Prayagcomplete all as specified and directed

S&F in repairs Toilet roll holder with stainless steel flap of make Jaquar Cat Part No AKP-35753PS or equivalent in Marc/Parryware/Prayag complete all as specified and directed

S&Fin repairs Towel ring sqare shape stainless steel of make Jaquar Cat Part No AKP-35721P or equivalent in Marc/Parryware/Prayag complete all as specified and directed

S&F in repairs corner glass shelf with bracket of make Jaquar Cat Part No ACM-1173 or equivalent in Marc/Parryware/Prayagcomplete all as specified and directed

S&F in repairs CP over head shower square shape of size 150x150mm of approved make with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange complete all as specified and directed

S&F in repairs Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union CP over head shower of size 125mm of approved make with CP shower arm for wall mounted showers flange complete all as specified and directed

S&F CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange of make Jaquar Cat Part No OPP-15125PM or equivalent in Cera/Parryware/Prayag (without hand & ober head shower) complete all as specified and directed

S&F CP Hand shower 27x27 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar Cat Part No HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar Cat Part No SHS-571 or equivalent in Cera/Parryware/Prayag complete all as specified and directed

S&F in repairs CP single lever wall mixer with provision for overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange of make Jaquar Cat Part No OPP-15117PM or equivalent in Hindware/Parryware/Prayag ocomplete all as specified and directed

S&F lever sink mixer with swinging spout on upper side (wall mounted model ) with connecting legs & wall flanges of make Jaquar Cat Part No LYR-38165 or equivalent in Cera/Parryware/Prayag complete all as specified and directed

S & F in repairs Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm including pedastal complete all as specified and directed .

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan padestal pattern white, (excluding fixing bolts, flushing cistern) but including flush pipe, matching seat and cover complete all as specified and as directed.

S&F in repairs Brass CP angular stop cock fancy type 15mm bore with Capstan heads complete all as specified and directed.

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap complete all as specified and directed

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) bends/bend with access door 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends/bend with access door 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and directed

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof for 75mm/110mm bore of pipe complete all as specified and directed

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Dismantling water tanks exc 250 ltrs but not exc 500 ltrs capacity and removing to store complete all as specified and directed

Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity and removing to store complete all as specified and directed.

Supply and fixing rotational moulded HDPE water storage tank , triple layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs hoisted and fixed in position including 25mm bore float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Supply and fixing rotational moulded HDPE water storage tank , triple layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs hoisted in position including 25mm bore float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed .

M&L 12 mm thick toughened sheet clear glass including edges bevelled /rounded including grinding / cutting complete with all fittings/ washers/handles and bolts complete all as specified and directed.

S&F for stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed.

S&F plain stainless steel basket of size 420x485x200mm complete all as specified and directed.

S&F plain stainless steel cup & saucer basket of size 520x585x100mm complete all as specified and directed.

S&F plain stainless steel perforated cutlery basket of size 470x485x100mm complete all as specified and directed.

S&F plain stainless steel grain trolley of size 525x485x350mm complete all as specified and directed.

S&F plain stainless steel thali basket of size 470x485x200 complete all as specified and directed.

S&F ball bearing drawer channel (soft close) of size 600 mm long complete all as specified and directed.

S&F for clip on cabinet hinge(auto close) complete all as specified and directed.

S&F 6.30 mm thick sheet glass of ordinary quality and glazing with oil putty in square exc 0.50 sqm complete all as specified and as directed

S&F 8.00 mm thick sheet glass of ordinary quality and glazing with oil putty in square exc 0.50 sqm complete all as specified and as directed

S&F in repair double bowl kitchen sinks made of stainless steel(SS304 Grade) 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 980mmx480mmx230mm and each bowl size n exc 400mmx400mm complete all as specified and directed.

S&F in repair kitchen sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to waste pipe upto 0.5sqm each, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F stainless steel kitchen plate rack of size 31" X 30' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack complete all as specified and directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and directed.

Taking up or down steel tubing and disconnection, for 25mm bore of pipes complete all as specified and directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 20mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supply and Laying Steel Water Tubing 25mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butter fly handle 20mm dia complete as all specified and as directed.

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butter fly handle 25 mm dia complete as all specified and as directed..

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butter fly handle 15mm dia complete as all specified and as directed..

S&F cutting chases, pinning in brick walls making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete as all specified and as directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete as all specified and as directed..

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in concrete, brick work, masonary etc. portion and making good disturbed ground complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed.

Dismantling fencing wire mesh any type, complete all as specified and directed.

Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and directed.

Material and labour for plain Cement concrete M-10(Nominal Mix) (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

Mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

MS work for screws bolts 5 to 10mm dia of neck (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 cm and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and directed.

M&L Painting 2 coats of synthetic enamel paint on new steel and iron surfaces of any description over 10 cm in width or girth including preparation of surface and over one coat of red oxide zinc chrome primer complete all as specified and as directed

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and as directed .

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed

Material and labour for high strength steel round bars (Fe 500D) 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

S & Fixing as in repair 0.63mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Material and labour for Plain Cement Concrete M-15(Nominal Mix) using 20 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs, water trough and the like including weathering slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

M&L for 75mm thick plain cement concrete Type C2 (1:3:6) (using 20 mm graded stone aggregates) as in plinth protection complete all as specified and as directed.

Material and labour for Plain Cement Concrete M-10(Nominal Mix) (using 40 mm gaded stone aggregate) as in surface channel & drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30CM inner girth in cement concrete using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed

M&L Reinforced cement concrete design mix M-20 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L formwork including wastage of formwork to sides of pillars, posts,struts,pirs , coloumns and like (Square, rectangular or polygonal) complete all as specified and directed

Material and labour for high strength steel TMT bars (Fe 500D) 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel (annealed) wire not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Repair to damaged roof after complete removal existing treatment including padding, cleaning, the surface using wire brush brooming down and appplying the following treatment all as directed in order of precedence as stated:- (i) Rendering 15mm thick in Cm (1:3) on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm. (ii) Applying one coat of bituminious primer . (iii) Applying one coat of a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including surfaces. (iv) supply and laying 3mm thick APP based polymeric membrance of approved manufactured with weight not less than 3.00 Kgs Sqm reinforced with non-woven polyester febric weight not less than 150gms per Sqm. Polymeric membrance shall be taken to a height of 3cm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing. Note :- (i) Laying APP based polymeric membrance shall be done torch on method as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrance respectively and sealed all overlaps and joints as per manufacturers instructions. (iii) APP based polymeric membrance shall be "SUPER THERMOLAY"

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over one coat of primer over one coat of 1mm wall care putty complete all as specified and directed

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over one coat of primer complete all as specified and directed

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over one coat of primer over one coat of 1mm wall care putty complete all as specified and directed

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over one coat of primer complete all as specified and directed

M & L for complete removal of old ceiling surfaces and applying two coats of white washing over a coat of chalk whiting complete all as specified and as directed.

Complete removal of existing treatment on old ceiling surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and directed

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L preparation surface of wood and wood based material new or old of any description and girth and treated with two coats of creosote oil complete all as specified and directed

Complete removal of existing treatment on roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed .

M&L for waterproof cement based exterior wall putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. Note : (a) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item. (c) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (d) Masking of window/doors during spray painting using polythine film will be included. (e) Cleaning and clearing site of paint, mats etc. included. (f) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years.

Material & Labour for applying Two or more coats of 100% Premium acrylic smooth exterior paint with Silicone additive of required shade : New work ( Two or more coats applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scafolding upto 10m hight of building is included in this item. (d.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (e) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be reserve against painting work after date of completion for the 05 years.

M&L for 12mm thick seamless calcium silicate ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillings head with under head cutter at 200 mm centre to centre incl finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish fibre tape to provide incl two coat of putty and two coat of OBD design incl GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c with 4 mm suspendor wire complete all as specified and directed.

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed

M&L for roof truss ( framed), trussed , purlin etc. of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) complete all as specified and as directed

M&L 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base of floor complete all as specified and as directed

M & L 100mm thick plain cement concrete 1:2:4 Type B-2 (using 40mm graded stone aggregate)as in sub-base of floor complete all as specified and as directed .

M&L for outdoor 10mm thick vitrified paving tiles (square /rectangular) polished area of each tiles exc 0.06 but n exc 0.11 in floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed

M&L for outdoor 10mm thick vitrified paving tiles (square /rectangular) polished area of each tiles exc 0.06 but n exc 0.11 in floors laid over in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4 jointed pointed with coloured cement to match the tiles complete all as specified and as directed

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and as directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including necessary cutting to wall for inserting the M.S. switch box and makining good the distrubed surfaces of wall properly of any size as required at site complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One light point controlled by one, one way switch complete all as specified and directed Note: Cutting and/or Forming Chases, Cutting or Leaving Holes/Recesses, Sinking and Making Good in Cement Mortar 1:3 for filling up to 20mm and in PCC 1:2:4 (12.5mm Graded Stone Aggregate) for filling more than 20mm shall deemed to be included quoted rates.

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including necessary cutting to wall for inserting the M.S. switch box and makining good the distrubed surfaces of wall properly of any size as required at site complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one bell point controled by one bell push complete all as specified and directed Note: Cutting and/or Forming Chases, Cutting or Leaving Holes/Recesses, Sinking and Making Good in Cement Mortar 1:3 for filling up to 20mm and in PCC 1:2:4 (12.5mm Graded Stone Aggregate) for filling more than 20mm shall deemed to be included quoted rates.

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including necessary cutting to wall for inserting the M.S. switch box and makining good the distrubed surfaces of wall properly of any size as required at site etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for socket outlet point 5 Amp on same board complete all as specified and directed Note: Cutting and/or Forming Chases, Cutting or Leaving Holes/Recesses, Sinking and Making Good in Cement Mortar 1:3 for filling up to 20mm and in PCC 1:2:4 (12.5mm Graded Stone Aggregate) for filling more than 20mm shall deemed to be included quoted rates.

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including necessary cutting to wall for inserting the M.S. switch box and makining good the distrubed surfaces of wall properly of any size as required at site complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one light point controlled by 02 Nos two way switch complete all as specified and directed Note: Cutting and/or Forming Chases, Cutting or Leaving Holes/Recesses, Sinking and Making Good in Cement Mortar 1:3 for filling up to 20mm and in PCC 1:2:4 (12.5mm Graded Stone Aggregate) for filling more than 20mm shall deemed to be included quoted rates.

M & L for Concealed Point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including necessary cutting to wall for inserting the M.S. switch box and makining good the distrubed surfaces of wall properly of any size as required at site complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for socket outlet point 5 Amp on Independent board complete all as specified and directed Note: Cutting and/or Forming Chases, Cutting or Leaving Holes/Recesses, Sinking and Making Good in Cement Mortar 1:3 for filling up to 20mm and in PCC 1:2:4 (12.5mm Graded Stone Aggregate) for filling more than 20mm shall deemed to be included quoted rates.

M & L for Concealed Point wiring with 4.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including necessary cutting to wall for inserting the M.S. switch box and makining good the distrubed surfaces of wall properly of any size as required at site complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and directed Note: Cutting and/or Forming Chases, Cutting or Leaving Holes/Recesses, Sinking and Making Good in Cement Mortar 1:3 for filling up to 20mm and in PCC 1:2:4 (12.5mm Graded Stone Aggregate) for filling more than 20mm shall deemed to be included quoted rates.

Supply and fixing modular switch 1 way 6A, 1 module 230 volt , 50 Hz, AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing modular bell push 1 way 6 A, 1 module 230 volt , 50 Hz, AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing modular switch 2 way 6A, 1 module 230 volt , 50 Hz, AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing modular switch 16A 1 module 230 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 8 modules complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 6 modules, complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 4 modules complete all as specified and directed.

S & F Modular cover plate with frame& flush box of 3 modules complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 2 modules complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 1 module complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal, white colour complete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked complete all as specified and directed.

S & F wall mounted LED batten fittings with all accessories 1X 18 Watt LED 6000K , extruded Aluminium housing, integrated electronic driver and fixed to wall including taking down old unserviceable light fittings complete all as specified and as directed including

S & F wall mounted LED batten fittings with all accessories 1X 10 Watt LED 6000K , extruded Aluminium housing, integrated electronic driver and fixed to wall including taking down old unserviceable light fittings complete all as specified and as directed

S & F wall mounted LED foot light fittings with all accessories 7 watt foot light 3000K , extruded Aluminium housing , integrated electronic driver and fixed to wall including taking down old unserviceable light fittings complete all as specified and as directed

S & F Wall bracket decorative LED Light fitting with lamp 9 Watt made of chromium plated metal complete with necessary connection including taking down old unserviceable one complete all as specified and as directed .

S & F LED Spot light Light fitting with lamp 8 Watt, 3000K Aluminium housing complete with necessary connection including taking down old unserviceable one complete all as specified and as directed

S&F lamp holder, insulated body, white colour with back plate for batten fitting complete all as specified and as directed

Supply and fix LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one complete all as specified and as directed

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall, and necessary cement work, making good of disturbed surface of wall, giving electric and water connection (including 450/600 mm length Hot and Cold water Hose) and testing after installation complete all as specified and as directed

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB of 16/20 A capacity, rupturing capacity 10 KA, 'C' Curve complete all as specifided and as directed

S & F Exhaust fan 230 volts , 250mm,plastic body including louvers including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed

M & L , testing, instatllation, commissioning of Kitchen Exhaust System VASCO DHC 90 | Filter Less and Dry Heat Clean Technology | Matt Black Finish, Hassle free Filter Less and Dry Heat Auto Clean Technology, Thermostatic Touch Control Panel with 3 Speed Gesture Motion, including, Matt Black Finish, Black Metal Oil Collector,Motor with Copper Winding, Black Glass Clad Hood with LED Insignia, Front Panel with Black Glass, Energy Saving LED Light,Metal Blower + Metal Housing, Designed Air Flow (max): 1250 m3/h, Noise Level: 58 dBA (max), Lifetime Warranty, Size: 90 Cm complete all Civil work for fixing system, , make hole and replastiring esxiting wall with wall colour codeing with Basic Civil work required including fixing of Duct and complete Electrical wiring. as reqruied for system running complete all as specified and directed.

Supply and fixing LED security Building light LED 35 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light and fixing on suitable size GI bracket (medium grade) of length 0.75 mtr including holding clamps and nut bolt for holding clamp complete all as specified and as directed

Supply and fix Vertical distribution board double door VTPN 4 way with IP 43 multiphase outgoing suitable for mounting 100/63 Amps MCCB as incomer with Bus bars (200 Amps), Neutral links complete with all accessories complete all as specified and as directed

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessary connection complete all as specified and directed.

Supply and fix MCCB of 4 pole , 415volts of capacity 63 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessary connection complete all as specified and directed.

Supply and fix MCB SPN, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32/40 Amps 10 KA rupturing capacity 'C' series fixed in DB's. complete all as specified and as directed

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding cutting chase to wall as required for insertion of PVC conduit incl taking down old wiring etc complete all as specified and as directed Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding cutting chase to wall as required for insertion of PVC conduit incl taking down old wiring etc complete all as specified and as directed Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

Taking down existing energy meter and refixing the same after completion on the original location all work complete all as specified and as directed

Taking down existing water heater of any capacity and deposit the same at MES Store yard complete all as specified and as directed

Materials and labour for Earthing complete with GI earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.50 mtr below normal ground level connected to GI earth lead 4 mm dia by means of GI bolts, nuts, check nuts, washers made out of GI/steel, all as shown on electrical plate No 3 of MES schedule part-I, earth lead wire connected to indicated position including upto 7.5m long 15 mm bore GI pipe for earth wire protection and concrete pit in PCC(1:3:6, C1),Precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mesh including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion complete all as specified and as directed.

M& L for sand cushioning in trenches for protection of under ground cable provided in layers of sand as 8 cm before laying the cable and 15 cm deep after laying cable complete all as specified and directed. Note : Punned thickness shall be measured and paid.

M&L Fly Ash compact modular bricks locally available of size laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

M&L 40 mm bore steel for tubing light grade ISI marked for protection of cable including necessary joint including taking down old unserviceable one complete all as specified and as directed.

M&L for boring holes of size upto 150 mm with all required arrangement at route for insertion of GI cable ptotection pipe all as directed.

Material and labour for LT XLPE insulated armoured heavy duty cable 1100 volt grade ISI marked with alumimium conductor multi strand cross sectional area 25 Sqmm 4 Core complete all as specified and directed.

M&L XLPE insulated armoured heavy duty electric cable 1100 volt grade with alumimium conductor multi strand cross sectional area 10 Sqmm 2 Core complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete M-20 (Design mix) using 20 mm graded stone aggregate as in columns, pillers, pier post and struts complete all as specified and as directed.

Demolition of reinforced cement concrete of any position not otherwise specifically provide for complete all as specified and directed

M/S UTTAM SAHA

M/s Gupta Construction

N.K.TRADING COMPANY

M/s Dhruv Enterprises

MAHINDER ELECTRICALS

PURBANCHAL BUILDERS

Jasvit Constructions Private Limited