Special repair estimate for work for special repair of 14 nos. Judicial Houses in New Judicial Enclave in Sector 15A Faridabad

Amount

Providing two coat of exterior acrylic emulation paints. 1stb quality [HSR 16.79b] [Note:- First quality paint of repoted make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian and Shalimar shall be used as approved by Enginer-in-Charge in writing, drum of paint shall be opened in presence of Engineer-in-Charge.]

Painting two coats with synthetic enamel Paint in all shades on Old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. [Note:- First quality paint of repoted make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian and Shalimar shall be used as approved by Enginer-in-Charge in writing, drum of paint shall be opened in presence of Engineer-in-Charge.]

Commercial hard wood such s hillock, champ. Chikrassy and chaplash etc. (Non coniferous timber other than teak conforming to I.S specification no. 1003 Kiln seasoned) wrought, planed and fixed in position [HSR 17.8]

Providing and fixing plywood, plain lining butt jointed, including wooden plugs (Teak, placed at 45 cm to 60 cm centers, complete with necessary nails (Frame work shall be payable extra)- 12 mm thick 3 ply commercial ply wood with teak faced on one side [HSR 17.47h]

Providing and fixing flat pressed singled or 3 layers particle board of B.W.R grade (medium density) in plain lining butt jointed, including wooden plugs (Teak) placed at 45 cm to 60 cm centres, complete with necessary nails (frame work shall be payable extra)- 19 mm thick [HSR 17.48b]

Providing and fixing Bamboo Jaffery with good bamboo of dia from 1’ to 1.5’ half champered fixed on hard wood frame of section 2’ x 2’ vertically and horizontally with nails and wire on the boundary wall complete in all respect as per direction of Engineer-in-Charge (NS).

Providing and fixing poly carbonate sheet 1.25 mm thickness on gates and grills excluding the cost of MS framework but including the cost of nut bolts, welding roads complete in all respect as per direction o0f Engineer-in-charge [HSR 18.43]

Providing and laying thick coat with bitumen VG-10 grade pressure distributor at the rate of 0.30 Kg. per sqm. On the prepared bitumen/ granular surface cleaned with mechanical broom including cost of bitumen as per clause No. 503 (5th edition) 2013 as per MoRT&H specification (N.S)

Providing and laying 20 mm thick premix carpet (pc) excluding cost of tack coat, with mixed material brought from Hot mix plant and laying with paver finisher and compacting with road roller to achieve specified value of compaction and direction of Engineer including cost of lighting arrangement, sign board and light watch, complete in all respect. i/c cost of Bitumen VG-10 grade as per clause 510 MoRT&H specification (5th edition) 2013 (N.S)

Providing and laying “B” type seal coat with VG-10 grade bitumen excluding cost of tack coat, with mixed material brought from Hot mix plant and laying with paver finisher and compacting with road roller to achieve specified/ desirable value of compaction as per direction of Engineer including cost of lighting arrangement, sign board and night watch complete in all respect as per clause 511 nad 510.1.3 of MoRT&H specification (5th edition) 2013 (N.S)

Pulkit Aggarwal

RAJEEV ASSOCIATES

Raghubir Singh

prashant construction company