Construction of Additional Administrative Block in Mini Sectt. complex at Bhiwani (Pdg. Street light,400 KVA DG Set and 11 KV Substation only)

Amount

[23.22.8.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.5. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 400 amp 415 volts [Through Rate]

[23.24.1]MS STAND, BUS BAR CHAMBER AND PANELS 1. Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. [Through Rate]

[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. [Through Rate]

[23.26.3]SAFETY ITEMS 3. Supply and erection of shock restoration chart in glass frame. [Through Rate]

[23.26.4]SAFETY ITEMS 4. Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6x4 made of GI pipe 32mm dia). [Through Rate]

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]

[24.1.13]EARTHING AND LIGHTENING ARRESTOR 13. Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. [Through Rate]

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]

[24.12.24]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITHOUT SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 24. 16 Sq mm 4 core (Arm.) [Through Rate]

[24.12.88]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITHOUT SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 88. 240 Sq mm 3.5 core (Arm.) [Through Rate]

[24.16.4]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in Existing Pipe/Trenches/Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 4. Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in Existing Pipe/Trenches/Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 95 Sq mm 3 core [Through Rate]

[24.2.10]LT CABLE 10. Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/riveted at the top with 10 cm dia 3 mm thick MS plate inscribed with cable word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. [Through Rate]

[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.4.15.2]STREET LIGHT 15.2. B.S.E.N. 10025 High Masts "Supply, installation, testing and commissioning of 16 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top and Bottom Section = 3 mm & 4mm (minimum) Top Dia = 150 mm and Bottom Dia = 410mm Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)" [Through Rate]

[24.5.2.1]MISCELLANEOUS ITEMS 2.1. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 40/32 mm outer dia/ inner dia [Through Rate]

[24.5.2.7]MISCELLANEOUS ITEMS 2.7. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 180/150 mm outer dia/ inner dia [Through Rate]

[24.7.5]RCC FOUNDATIONS FOR DG SET 5. 250 KVA DG Set [Through Rate]

[24.7.6]RCC FOUNDATIONS FOR DG SET 6. 400 KVA DG Set [Through Rate]

[24.9.2]RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES 2. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 16m high mast pole [Through Rate]

Supply and erection of 11 KV pin insulator with pin make with all labour and material required to complete the job including fixing the same on existing channels upto the entire satisfaction of Engineer-in- Charge of the work.

Supply and erection of lightining aresster module suitable for 11 KV G.O. switch with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.Make rashtriyaa/Jayshree/BHEL

Supply and erection of Rubber Mat 1mx2mx12mm thick suitable for 11/33 KVA as per IS No. 15652C/M/L 3017739 as per approved by Chief Electrical Inspector, Govt. of Haryana with all labor and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (Excluded GST)

Supply Erection testing and Commissioning of 11 KV HT metering panel complete with C.Ts P. Ts. Cubical and electronic meter with accuracy class as per requirement/approved by DHBVN at the time of installation, consisting of the following. (As per Approved by DHBVN). Cubical panel free standing floor mounting type made out of sheet steel 14 SWG CRCA sheet with channel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the DHBVNL 3 Nos. 11 KV CTS of rating as approved by DHBVNL for indoor installation of appd. Make of 1 Nos. 11 KV PTs 11000/110 Volts Oil filled suitable for indoor installation of approved make DHBVNL. Space for Digital Electronic Meter 3 phase 4 wires recording in KWH and rating and accuracy as by DHBVNL with push button display operating system of different kind of readings. The cubical panel will be completed in all respect including intter connection, internal wiring with PVC copper cable, its testing and approval of all item by DHBVNL including cost of all testing/ approval charges of all items of DHBVNL with a guarantee of one year from the date of commissioning including cost of all labour and material required to complete the job but excluding the cost electronic meter in all respect up to the entire satisfaction of the engineer in charge of the work.(Excluded GST)

Supply,erection, testing and commissioning of automatic power factor control panel 275 KVAR complete with all accessories Rated voltage 415 Vac, 3 phase, 50Hz, Delta connection, super heavy duty cylindrical capacitor 275 KVAR/415 V APFC panel CYCAP with MCCB 500A/ 50 KA Hight x weight x depth:- 1675 x 1200 x 700 including connection but without cost of MCCB 500 amp. complete in all respect : -.Make Havells/Crompton/ABB/Siemens (Excluding Rate of GST)

Supply of PCC Pole 11 mtr. Long complete in all respect as per DHBVN specifications and up to the entire satisfaction of Engineer-in-Charge. (Rates are exclusive GST) .

Supply and Erection of fire buckets of 9 ltr. capacity made out of 24guage G.l sheet and duly painted with one coat of red oxide and 2 coats of approved paint in red colour and written with the fire` as per fire protection necessar sand filling in the bucket hung the bucket on stand with all labour and material required to complete the job all respect up to entire \satisfaction of the Engineer m charge of the work (Rates are of GST excluded)

Supply and erection of 11KV gang operated switch Rashtriya / Jayshree / BHEL make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing `H`pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. (Make and specification as per DHBVNL) (Rates are of GST Excluded.)

Supply/ erection/ testing / commissioning of time light distribution board (Astronomical) 65 amp 3 pole / 230 Volts with digital time switch having suitable size of 1 no. 63 amp TPN MCB, 1 no. 65 amp contactor, 1 HRC fuse , 1 No. Rotary Switch, 1 No. 16 amp fuse base, 1 No. Timer switch and 1 Indicator having IP 52/56 Degree protection all items should be of same make / manufacturer including pedestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in Charge of the work. (Make:- IndoAsian/ Havell`s/ L andT). (Rates are excluding GST).

S/I/T/C of 200 W LED Flood light luminaries with high power LED 120 Lumens per Watt Surya and Equivalent Model of Wipro / Phillips / Bajaj in LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. ( Rates are of GSt Excluded)

Supply and erection of 11 KV Disc Insulator Polymeric Type TandC as per DHBVN specifications and upto the entire satisfaction of Engineer-in-Charge. (Exclusive GST)

Supply , install, testing and commissioning of 11kV 630 Amps 21KA for 3 Sec. SF6 insulated, Non- extensible, outdoor duty manual type 3 way Ring main unit in combination of 1 nos. VCB module as Incomer and 2 nos. VCB modules (outgoing to Transformer) consisting of copper busbar in SF6 insulated 304 (Non-Ferrite Non-Magnetic Grade) stainless steel enclosure of thickness 3 mm with manometer fixed, with series trip, self-powered microprocessor based numerical over current relay (IDMTL plus Inst.) in each VCB feeder. The HV switchgear and control gear should be confirming to IEC-62271-1, 100, 200. The RMU should be internal arc tested for 21KA for 1Second with IAC-AFLR classification for gas tank and cable box. The complete RMU front along cable chamber to be covered by a separate outdoor door to have ingress protection of minimum IP54. The RMU design should support site replaceable HT cable bushing. Each feeder of should have voltage presence indicator. All the type test certificated as per IEC from Third party lab to be submitted. RMU Should have followings: - 1 no. microprocessor based Self powered numerical relay with over Current/ earth fault and short circuit protection with each VCB feeder. - 3 Nos. Protection CT shall be of Burden 2.5VA, ratio 100-50/1A, Class of Accuracy class 5P10 for O/C and E/F protection for each VCB. - VCB should confirm operating sequence O-0.3Sec-CO-3min-CO and 10000 mechanical operation. - OTI, WTI trip for VCB modules for transformer protection. - 3 nos. 1 ph 11KV/110V PT having accuracy class 1.0 and VA burder 50VA. - Multifunction Meter (RMU manufacturer`s own Make) with Accuracy class 1.0 for each VCB feeder. - 1 No. Manometer for each tank -1 nos. Voltage passage indicator for each feeder. -Right angle boots for all the feeder Modules Make of RMU: ABB/SIEMENS/ SCHNEIDER INFRA/ Voltamp (No System house /Franchise/ license partner is approved/acceptable) (Rates Excluding GST)

Supply, Erection, Testing and Commissioning of 400 KVA DG SET confirming CPCB IV plus Norms, 3 Phase, equivalent to or comprising of Grieves Engine Model no. 12V14TAG31, Radiator cooled, developing 640.1 BHP at 1500 RPM , Complete with Electronic Governor, Standard accessories coupled to Leroy Somer/Crompton Greaves/Stamford Alternator mounted on Channel Iron Base Frame Complete with Fuel tank and Battery and Standard accessories with AMF Panel. Make : Cummins/Greaves Cotton/Kirloskar/ Ruston( Rates are excluding GST)

SITC of 800 KVA IS 2026 PART 14 Hybrid Insulation Inverter Duty transformer. Insulation Class A Indoor Type KVA Rating:- 800 KVA Copper wound Rated Voltage 11000/0.433, HSV on HV side 12 KV, Rated Frequency:- 50 HZ ( plus -3%), Connection:- HV (Delta), LV (Star), No. of Phases: 3, Connection Symbol:- Dyn 11, OFF circuit Tap:- plus 5% -10% @ 2.5%, Variation HV Variation, REF Ambient Temperature:- 50deg C, Type of Cooling:- ONAN, Temperature Rise in oil/winding:- 40deg / 45degLosses in watts: Total Losses as per IS-1180-L2, Impedance Volt.@ Normal Tapping 5%, Induced over voltage in KV: HV:22KV, LV: 0.866KV, Core material: CRGO M4 0.27 Accessories: Digital OTI/WTI with alarm/Trip contacts, PRV for main tank, Buchholz Relay with shut off valve, Mog, Radiators, silica gel breather, Rollers- 4 Nos, Lifting lugs, marshing box with socket, Heater, Thermostat, Bulb, Rating and diagram plate air release plug, earth terminal, transformer is -2026-14, mineral oil: IS: 335Rated primary current: 41.09A, rated secondary current: 1066.04ATotal weight of Transformer 4260Kg Dimension: 2800mm x 2300mm x 2300mm Make: /Schneider /Crompton/Siemens/ Voltamp (Rates are excluding GST)

Dekhora Power & Contructions Private Limited (BID ID -1355436)