Electrification of NMC Swami Vivekanand ELibrary in P No 18 Zone No 6

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-P

Secandary point wiring for additional light/ bell point in PVC trucking (casing-capping) with 1.5 Sq.mm (2+1E) FRLSH grade copper wire with requrired accessoriesas per specification

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm(2+1E) FRLSH grade copper wire, modular type switch, earthing andrequired accessories as per specification No: WG-PW/SW

Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/S

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

S & L rigid PVC Conduict of size 20 mm with accessories on wall/celling as per specification

Supplying and erecting modular type 3 pin 6A multi socket with safetyshutter, duly erected on provided plate and box with wiring connections

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safetyshutter, duly erected on provided plate and box with wiring connections complete.E

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light withpolycarbonate body, heat sink, integrated HF electronic driver complete &compatible to T8 / T12 LED luminaire by disconnecting starter & ballast ifnecessary.

Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22 /E-27 base.

Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position with regulator as per specification no. FG-FN/CF

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x75 mm long with necessary materials for ceiling fan.

Supplying and erecting' B' class GI pipe MS. Pipe down rod duly painted for complete erected with PVC three core Flexible cable 1 Sq.mm copper PVC

Supplying and erecting Cabin fan 230 V A.C. 50 cycles 400 mm Sweep complete erected in position with necessary bracket for fixing cabin fans, wire

Supplying and erecting energy saving air cum exhaust fan of light duty 250 V A.C 50 cycle 225mm 1400 RPM rust proof body & Blad , wire mesh , duly erected complete

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or anyother places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 1.5 sq.mm FR PVC copper wire, in rigid PVC conduit min.20mm dia,as per specification No: WG-MA/PC, para no. 1.4.1

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVCinsulated wire laid in provided onduit/ trunking/inside pole/Bus bars or anyother places as per specification No: WG-MA/BW

Supplyinganderectingmodular typeswitchoneway16/20A, dulyerected on provided plate and box with wiring connections complete with neon indicator.

Supplyinganderectingmodular type32A,DPkeytagswitch with keytag, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3pin6Amulti socketwithsafety shutter, duly erected on provided plate and box withwiring connections complete.

Supplyinganderectingmodulartype3pin6/16Amulti socketwithsafety shutter, duly erected on provided plate and box withwiring connections complete.

Supplying and erecting PVC Surfacemodular switch box with double mounting plate for 3 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying, erecting and marking Four pole isolator only switch version ofminiature circuit breaker of 80/100 A with required wiring connections and lugs etc.in provided distribution board.

Supplying and erecting metal work in CRCA sheet including Iron work forsupports with fabrication of boxes, panel boards, etc. including cutting,bending, drilling, welding, riveting, treated with anti-rust treatment and dulypowder coated or painted with one coat of red lead paint and 2 coats of enamelpaint complete.

Supply & laying PVC/ armoured aluminium conductor cable 1100 V grade ISI Mark a. 2 X 6 Sq mm

e. 4 X 16 Sq. mm.

g. 3.5 X 35 Sq. mm.

Supplying & laying (including excavation of road) 50 mm. outside dia. DWC Pipe.

Providing Cement Concrete foundation for concrete filling in with 20 to 25 mm. Stone metal duly plastered with necessary curing for pole muffing or any other purposes.a. Concreting 1:3:6

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting plywood 6mm thick fixed to wall or on provided pannel bord with necessary materials such as screw, wall fasters supports, Nuts bolts etc. complete.

supplying & ercting GI pipe "A" grade of following dia for erection of armoured cable b) 40mm

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of ....... hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS

Supplyinganderecting12V/65AhSMFbatterywithbatteryterminalwire,duly charged with 24 months warranty complete

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation &temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room airconditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation &temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erectedon angle iron/GI frame.

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board.

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/WAC

S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg.capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 42mm complete

Please Enable Macros to View BoQ information