Water Supply Scheme Udham Singh Nagar Galoli Block Patran District Patiala

Amount

Repair of RCC OHSR

One No. RCC OHSR 25000 ltrs capacity having height 20.00 mtr up to FSL and 17.00 m upto bottom slab has been already exists at site. The Repair of OHSR has been taken in this estimate.

Painting of C.I Pipes and Specials complete in all respects

Repair of expansion joint

Cleaning of OHSR with Bleaching Power complete in all respects

Disinfection Unit

Providing, Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6 Litres of Bleaching powder solution/ Sodium Hypo Solution per hour under maximum delivery pressure upto 7 ka.cm 2 and suction lift not less than 1.5 m, as per DWSS standard specifications.

Providing & fixing automated Water Controller complete in all respects.

Cost of Improvement of Existing Connections complete in all respects.

Providing proposed water connection to house hold up to wall with Providing MDPE pipe PN 16, 20 mm 2m and G.I Pipe ( as per IS 1239) B- Class, Premium make such as Jindal Hissar as approved by Engineer Incharge 15mm i/d=2.5 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On existing line)

Providing, Stringing out PVC pipes 6kg/cm2 ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for street (with mechanical earth work)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).

100mm i/d Sluice Valves flanged

Providing proposed water connection to house hold up to wall with Providing MDPE pipe PN 16, 20 mm 2m and G.I Pipe ( as per IS 1239) B- Class, Premium make such as Jindal Hissar as approved by Engineer Incharge 15mm i/d=2.5 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Proposed line)

Painting of exising Sign Board at water works site complete in all respects

Provision for bleaching powder or sodium chlorite for disinfection of water