SPECIAL REPAIR TO BLDG NO M-2 TO M-8 (MEDICAL OR MD ACCN), 06 BLOCKS (46 QTRS) JCO MD ACCN AT VASANT RANGE COLONY, 01 BLOCK(05 QTRS) OR MD ACCN AT BANA SINGH ENCLAVE AND OTM ACCN FOR INF BN AT HQ 35 INF BDE UNDER GE (SOUTH), DELHI CANTT

Amount

M&L for Preventive treatment against the danger of carbonation in exposed faces of RCC members :- (i) Cleaning existing surfaces of RCC members and making surface free of loose material, oil, grease etc. by vigorous wire brushing including light grit blasting where necessary as recommended by Engr-in-charge. (ii) Further, cleaning using biocide(as recommended by manufacturer) to ensure that surface is free of algae and fungus and no trace of paint (any type) left out. Sand blasting to be done to remove trace of paint. (iii) Cleaned surface to be allowed to dry. (iv) Spray a coat of primer (as recommended by manufacturer) over dry cleaned surface as required prior to final finish. Primer shall be diluted in proposition 2:1 with mineral turpentine. After application, primer shall be allowed to dry for 03 hours or as directed. (v) Apply a coat of neat Aliphatic Acrylic anti-carbonation (ACC) over the primed surface with air / spray gun at nominal rate of 3.5 ltrs per sqm as recommended by manufacturer. (vi) Apply a more coat of Aliphatic Acrylic anti-carbonation (ACC) after 5-6 hours as recommended by manufacturer complete all as specified and directed. (vii) Sprinkle sand cover over surface to receive new

M&L for followings :- (i) Removing plaster & finishes all around the coloumns, slabs & beams (on all sides of column to full height, three sides of beam to entire span & bottom of slab to area as directed) (ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible) (iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed) (iv) Cleaning exposed concrete substrate by using water jet. (v) Removing visible rust along the length of reinforcement using hand tools as approved. (The Engr-in-charge may order sand blasting if rust is approved) (vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed.

M&L for providing rust proof /anti corrosive treatment to bars :- (i) cleaning of all exposed bars (new & old) alround (ii) Apply a single coat of Alkaline rust converting primer on alround bars new & old as recommended by the manufactuer (iii) Apply two coats of Epoxy phenolic anti corrosive protective coat on bars alround new & old as recommended by the manufactuer. Note : Anti corrosive treatment shall be continuous espcially in the regions where pitting, imperfections, etc were present on the surface of the bars. It is important that the rear portions of re bars (those towards the concrete substrate) should not be left without coating. Superficial area of member to be considered for measurement

\M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.

M&L for treatement of cracks found in the core concrete :- (i) Opening of crack by making a ' V' notch/groove of size 12mm x 12mm over the entire length of the crack as identified by the Engr-in-charge. (ii) cleaning ' v' notch/groove of all dust/debris/loose material (iii) Drilling hole of 16mm dia and about 40mm deep along the length of crack @ (300 mm c/c or thickness of structural member whichever is less) Note : In case length of crack is found less than 300 mm then min 2 holes shall be drilled. (iv) Inserting 12 mm dia flexible PVC one way injection nipple in the hole drilled above and fixing the nipple with the help of fast setting epoxy putty. (v) seal the surface around the nipple and the area of crack between successive nipples polymer modified mortar to ensure that there is no leakage from any gap. (vi) Allow the polymer modified mortar to cure for 24 hours and ensure that firmly fixed in postion. (vii) cleaning nipple one by one commencin from the top to bottom in case of column and one by one in alternate direction incase of beam/slab using blow compressed air followed by water injection. An Ensuring that there is no obstruction in free flow of grouting materials complete all as specified and directed.

(viii) Injecting " resin with very low viscosity monomer by mixing resin and hardener in proportions recommended by manufacturer by using injection gun equipped with pressure gauge & valves for controlling of flow of compressed air & resin. Note : pressure shall be in the range of 1-2 kg/sqm and shall be done in nipples one by one as per order recommended by manufacturer. Mixing of resin and hardenere shall be mixed in small quantities so as it is consumed with in 30 minutes. Before use mixer shall be stirred thoroughly. (ix) Allow entire effected surface to cure for 24 hours. (x) cutting out projected parts of the nipple & seal the hole in the nipple with epoxy putty as recommended by manufacturer. (xi) cleaning exposed surface of substrate off any dust /loose material after ageing of the grout as recommended by manufactuer.

M&L for treatement of core concrete when found to be porous/honeycombed :- (i) Marking the area in marker as directed by the Engr-in-charge. (ii) Drilling holes of 16mm dia in an orthogonal grid on exposed cone of member @ 150 mm c/c both way, depth of the hole shall be about 60% of the element thickness. (iii) clean the drill hole using compressed air removing the dust/dirt. (iv) Inserting 12 mm dia flexible PVC one way injection nipple in the hole with the annular space around the nipple sealed with epoxy putty. It shall be ensured that the injected grount does not leak. (v) Allow the nipple to cure for 24 hours. (vi) Injecting " Resin with very low viscosity monomer by mixing resin and hardener in proportions recommended by manufacturer by using injection gun equipped with pressure gauge & valves for controlling of flow of compressed air & resin. Note : pressure shall be in the range of 2-3 kg/sqm and shall be done in nipples one by one as per order recommended by manufacturer. Mixing of resin and hardenere shall be mixed in small quantities so as it is consumed with in 30 minutes. Before use mixer shall be stirred thoroughly.

(vii) Allow entire effected surface to cure for 24 hours. (viii) cutting out projected parts of the nipple & seal the hole in the nipple with epoxy putty as recommended by manufacturer. (ix) cleaning exposed surface of substrate off any dust /loose material after ageing of the grout as recommended by manufactuer.

Supply & fixing 12mm dia steel sheer connector in grid pattern in between old core and new concrete as wherever directed by Engr-in-charge and as specifed by manufactuer including drilling hole of depth of 100 mm and chemical anchoring with pure epoxy resin anchoring mortar (Master flow 935 of BASF or equivalent FOSROC/SIKA). (The cost of drilling hole &chemical anchoring with epoxy resin is inclueded in this item) complete all as specified and directed. Steel is also measured with this item.

M&L for Providing & Pouring Micro concreting M-40 grade :- (i) Dry concrete substrate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed. Note : The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item.

M&L for Drilling & chemical anchoring of new rebars/stirrups :- (i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under :- 8 mm dia bar - drilling length 80 to 100 mm - 384 Nos Note : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar (Master flow 935 of BASF or equivalent FOSROC/SIKA) with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete. (The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item)

M&L for Drilling & chemical anchoring of new rebars/stirrups :- (i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under :- 16 & 20 mm dia bar - drilling length 160 to 180 mm - 336 Nos Note : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar (Master flow 935 of BASF or equivalent FOSROC/SIKA) with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete. (The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item)

M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed. Note : Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured.

S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Description of Work / Item(s)

Amount

Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified & directed

Demolition of mud in roof, any thickness, including plastering and leeping incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or complete all as specified & directed

M&L for brushing neat cement slurry with 3.00 Kg of cement per Sqm on existing surfaces complete all as specified & directed

M&L 50 mm thick (average thickness) plain cement concrete 1:2:4 type B-0 using (12.5 mm graded aggregate), as in roof ,padding to maintain the uniform slope complete all as specified and directed. Note : - WPC shall be measured & paid separately.

M & L for rendering 15 mm thick (average) plaster on concrete surfaces in CM (1:4) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and directed (Note :-Water proofing compound shall be measured and paid seperately).

M&L for cement concrete tiles 25cmx25cmx22mm thick laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3. complete all as specified and directed

Demolition unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed

Demolition of PCC in ground floors and pavings n'exc 15 cm thick below or above ground level (unreinforced) complete all as specified & directed

Demolition of cement concrete in above ground floors exc 15cm thick above ground floors complete all as specified & directed

M&L for applying a coat of cement slurry @ 0.488 Kg/Sqm mixed with tapercreate @ 0.253 Kg/Sqm after cleaning and drying the old/new surfaces(Make of tapercreate M/S CICO Engg Services) then applying the layer of fibre glass cloth while the above coat is still green. The overlap of fibre glass cloth shall be not less than 100 mm.(Make of fibre glass cloth M/S The Structure Water Proofing Co Pvt Ltd) and then applying 1.5 mm thick layer @ 1.288 Kg/Sqm mixed with taper create @ 0.570 Kg/Sqm and coarse sand @ 1.289 Kg/Sqm. Allow the treatment to air curing for four hours followed by water curing for 48 hours complete all as specified & directed

M&L for 10 mm thick cement plaster on brick/ concrete surface in CM 1:3, finished even and smooth surface with out using extra cement but mixing water proofing compound at the rate of 2% of cement by weight complete all as specified & directed (Note :- WPC shall be paid separately).

Supply only liquid water proofing compound.(ISI Marked liquid type) complete all as specified & directed

M&L Cement concrete Type F2 (1:5:10) using 40 mm graded stone aggregate in mass concrete in sunken floor complete all as specified & directed

M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floors finished rough complete all as specified & directed

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed

M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

M&L for coloured Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.

All as per item No 19 here in before but as in skirting laid over and including 10mm thick backing coat of CM (1:4),

M&L 40mm thick PCC flooring 1:2:4 type B1 using 20mm graded stone agg finished even & smooth without using extra cement complete all as specified & directed

M&L for machine cut kota stone slab flooring, and (one Pieces) as in steps (Treads), 20-25mm thick over cement screed bed 20mm thick with CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed

M&L 18 to 20 mm thick machine cut kota stone as in vertical surfaces for dados/skirting etc including 10 mm thick backing coat in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade complete all as specified and as directed

S&F in repair vitreous china squatting pan, (Orissa pattern) size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap etc including making good to floor complete all as specified & directed

M&L for vitreous china wash hand basin flat back size 400x350x150 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32MM X 600 MM long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified & directed (Note - WHB will be supported on angle iron of size 50x50x5mm duly painted with two coats of synthetic enamel paint for securing WHB).

M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified & directed

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons etc laid bedded and pointed in any morter complete all as specified and directed

M & L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes on cement mortar bedding of 20 mm in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed.

M & L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade other than white and black complete all as specified & directed

Rounding to edges of stone slabs one edge, such as in steps cooking platefom,and other similar situations complete all as specified and as directed

S&F in repair PVC valve less, symphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including PVC flushing pipe, 32 mm dia and fixed complete all as specified.

S&F in repairs PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified & directed

S&F in repairs CP connection 15 mm size with brass nut of length 600 mm complete all as specified & directed

S&F in repairs brass CP mixer fancy for mixing hot & cold water screwed down for iron pipe of 15 mm bore pipe complete all with complete assembly as specified and directed.

S&F in repairs Elegant bathroom PVC Mirror Cabinet of size 14“x 18” x 4" (PTMT alloy) complete all as specified.

S&F Chromium plated soap dish with screw complete all as specified & directed

S&F aluminium Peg set of 3 pegs as per sample complete all as specified & directed

M&L Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) complete all as specified & directed

S&F PVC laminated GI wire 2.00mm dia for cloth drying with S&F fastener as per site requirement complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail, 20 mm dia D type , 60 cm long between flanges all as specified and directed.

S&F in repairs brass chromium plated shower rose of size 125 mm with arms including fixing to steel pipe complete all as specified & directed

S&F in repairs bib tap, brass chromium plated fancy type, long body screwed down, screwed for iron pipe 15 mm bore complete all as specified & directed

S&F in repair Conceeled stop cock,15 mm bore, chromium plated ,with long shank and cup, fancy type, complete all as directed.

S&F in repair 15 mm dia brass chromium plated angle valve screwed at ends including necessary extention piece and fixed complete.

S&F in repairs Cast iron floor trap/nahani trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm in cement concrete type B1 (1:2:4) complete all as specified.

S & F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm,complete all as specified & directed

S&F PVC waste pipe 32/40 mm bore, 65 cm long complete all as specified & directed

S&F in repair staianless plate rack AISI 316 grade made of 1mm thick stainless steel sheet of size 775 mm x 900 mm x 250mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE's office complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each , refixing in the same opening complete all as specified & directed .

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each removing from store complete all as specified & directed

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames)removing from store complete all as specified & directed

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Size of frame - 125 x 60mm complete all as specified & directed

S&F mild steel work such as in door Chowekats,, tie bars etc including embedding into concrete and making holes for screwing of nut, bolts, cutting top to shape as directed, drilling holes, notching for wire etc confirming Fe 410-0 or Fe 310-0 all as specified and directed.

M&L for Cement concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) TypeC-0, 1:3:6 using 12.50 mm graded agregate complete all as specified & directed

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S& F 6mm dia Aluminium powder coated decco Grill (minimum thickness of powder coated 50 micron) fixed with suitable 'F' Section (No 8584) 15.30 X23.40X 1.40 mm (minimum), fabricated and riveted to aluminium window / ventilators complete all as specified and directed .

S&F 35mm thick plain framed 2nd class hardwood panelled shutter (two panels ) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle with commercial veneering on both face, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and chemically pressed, treated complete incl 15 to 20 mm tapering bedding on one face of second cl hardwood fitted to chowkhats complete all as specified.

S&F for 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S & F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed

S&F factory made solid FRP door frame of size 90mm x 45 mm made out of FRP sheet , complete all as specified & directed

S&F factory made solid panel FRP door shutter 30mm thick premoulded design made out of solid core, laminated 1.5 mm to 2mm thick GRP/FRP made of superior all seson, weather resistant polyyester get coat followed by laminating polyster resin of 450 gm glass mat termite all as per manufacturers specification.

S&F 100mm size butt hinges stainless steel of AISI 304 complete all as specified and directed.

S&F 300 mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clipss of sheet, cast or extruded sections and fixing bolts and fixed etc complete all as specified and directed.

S&F stainless steel of AISI 304 grade barrel tower bolt 200 mm long, extruded section, etc complete all as specified and directed.

S&F stainless steel of AISI 304 grade handle of size 200mm size long etc. complete all as specified and directed.

S&F brass magic eye for panelled/flush shutter 35mm thick complete all as specified and directed.

M&L for preparing old decorated steel surfaces of any description not otherwise described over 10 cm width or girth & applying two coat of synthetic enamel paint of any colour complete all as specified.

M&L preparation of newly surfaces of steel of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified.

M&L preparation of old painted surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified & directed

S& F in repairs factory made PVC cupboard frame of size 75 mm x 40 mm with a wall thikness of 4mm , made out of extruded 4 mm thick prelam PVC sheet of density 600 / cbm manufactured by an ISO -9001-2015 certified company , reinforced with 15 mm x 15 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos of 150 mm long brackets of 10 mm x 10 mm MS Square tubes .The door frame shall be fixed to wall using 65 /100 long MS screws to be provided for each vertical member and minimum of 2 nos of screw to be provided horizontal member etc complete all as specified & directed

M&L for cutting holes into or through one brick thick brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required superficial area exc 400 sqcm but nexc 0.10 sqm round shape for exhaust fan etc complete all as specified & directed

S&F stainless steel handle of of AISI 304 size 100 mm size long , etc complete all as specified and directed

S&F 100 mm long, stainless steel of AISI 304 grade, hasp and staple, safty type, incl bolt to hinge plate and fixed with screws etc. complete all as specified and directed.

S&F stainless steel of AISI 304 grade floor door stopper with hard drawn steel spring 140 mm long etc complete all as specified and directed

S&F, drapery curtain rods, stainless steel 30mm dia of approved quility with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 nos(min) match up rings etc complete all as specified

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified & directed

M & L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished fair and even without using extra cement, complete all as specified & directed

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified & directed

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed

S & F 20mm outer dia CPVC pipe SDR 11 with and including plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as directed.

S & F 25mm outer dia CPVC pipe SDR 11 with and including plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as directed.

S & F 40mm outer dia CPVC pipe SDR 11 with and including plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as directed.

S & F 50mm outer dia CPVC pipe SDR 11 with and including plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as directed.

S & F 20mm outer dia CPVC union complete all as directed.

S & F 25mm outer dia CPVC union complete all as directed.

S & F 40mm outer dia CPVC union complete all as directed.

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed..

S&F 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part II. complete all as specified & directed

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore complete all as specified & directed

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified & directed

S&F Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore and fixed complete all as specified & directed

S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, fixed to walls of 100 mm dia sand cast pipe complete all as specified and directed.

S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, laid in trenches or floors of 100 mm dia sand cast pipe complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 100mm bore including packing under and haunching against sides of pipes after they are laid and tested. complete all as specified and directed.

S & F in repairs CI soil, waste and vent pipe in any length with or without ears, with cement joints, fixed to walls of 75 mm dia sand cast pipe complete all as specified and directed.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 100 mm dia fitted with oval access door complete all as specified.

S & F in repairs CI Bends with access door (any radius ), diminishing pieces or tapers of 100 mm dia without oval access door complete all as specified.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted with oval access door complete all as specified.

S & F in repairs CI Bends (any radius ), diminishing pieces or tapers of 75 mm dia fitted without oval access door complete all as specified.

S & F in repairs Cast iron branch pieces, Tee, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 100 mm bore with cement joints, fitted with oval access doors complete all as specified & directed

S & F in repairs Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, 75 mm bore with cement joints, fitted with oval access doors complete all as specified & directed

S & F 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm complete all as specified & directed

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for 100 mm bore pipes complete all as specified & directed

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for75mm bore pipes complete all as specified & directed

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified & directed

S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, of 110 mm dia complete all as specified and directed.

S&F for PVC (SWR) bends any radius 110mm dia bore complete all as specified & directed

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed

M & L rendering 15mm thick in CM 1: 6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified & directed

M&L rendering 15mm thick in CM 1: 4 on faces of brick work or concrete surfaces, finished even and smooth mixed with water proofing compound complete all as specified & directed Note:- Water Proofing Compound will be measured and paid separately under respective item.

M&L Rendering 5mm thick in CM 1: 3 on concrete surfaces of ceiling,chajja,etc finished fair and even complete all as specified & directed

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with wall care putty for even and smooth finish over a coat of interior primer complete all as specified and as directed

M&L for preparation by complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and old plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care putty complete all as specified & directed

M&L preparing new plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified & directed

Complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and preparing old plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified & directed

M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed

M&L for applying two coat of white wash on ceiling of old surfaces including preparation of ceiling surfaces complete all as specified & directed

Demolition of brick work built in cement or cement lime mortar complete all as specified & directed

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified.

S&F 6 mm thick glass corner shelf (Single shelf) of best quility with CP steel railing of size (250mmx250mm) of best quality complete allas specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed

M&L for MS hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate in sub base complete all as specified & directed

M & L Machine pressed pre cast concrete inter locking paver block 60mm thick M-35 grade with grey cement and pigment & glossy finished any shape colour, size complete all as specified and directed.

M&L for sand cushion under layer of floor complete all as specified & directed

M & L for removing excavated soils exc. 500m and and n. ecx 500 mtr depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Cutting of trees including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified.

S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed

All as per Srl item No 139 here-in-before but as in repair after taking down old.

S&F as in repair for welding of 100mm size butt hinges medium wt cold rolled MS incl taking down shutter and refixing in same position and making good/functional incl supply of butt hinges complete all as specified & directed

Hacking out old broken glass of any size, thickness, quality or description from metal frame nexc 1.5 sqm each complete all as specified & directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exec 0.5 sqm each pane complete complete all as specified & directed

All as per Srl item No 143 here-in-before but figured glass pin headed type

S & F 40mm dia 3-layer PP-R Polypropylene random copolymer pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings for over flow pipe of PVC water tank including connection to tank fixed complete to walls, ceilings/roofs or in floors etc complete all as specified & directed

S & F 40 mm PP-R connection(Tank nipple) for water tank to overflow PP-R pipe 40mm dia complete all as specified & directed

S&F tank nipple GI 20mm bore all as specified complete all as specified & directed

M & L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down concrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over and including steel welded mesh having 2 mm dia of wire and aperature 50mm, total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas,fins, facias, parapets, Lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs including finishes as existing complete all as specified & directed

Demolition of RCC of any description, in any position roofs, floors (other than ground floors), beams staircases, landing, chajjas, RCC overhead tank and similar suspended work and Removing excavated material /demolition material exc. 1.50 km but n exc.5 km including taking down from upto four storey complete all as specified & directed

M&L for form work to chajjas and similar items including edges thick finished rough complete all as specified & directed

M&L for RCC 1 : 2 : 4 type B1 using 20mm graded stone agg as in chajjas complete all as specified

S&F 10mm dia TMT bar as in reinforcement of RCC of any description cut to length bent to shape required including cranking, bending, binding with MS wire not less than 0.90mm dia complete all as specified & directed

S&F 8mm dia TMT bar as in reinforcement of RCC of any description cut to length bent to shape required including cranking, bending, binding with MS wire not less than 0.90mm dia complete all as specified & directed

M & L for RCC 1 : 2 : 4 type A1 using 20mm graded stone agg as in roof slab suported on wall beam and columns in floor slab complete all as specified

M&L for form work to soffits of suspended slab such as roof slab and similar work not exc 200mm thick finished rough complete all as specified & directed

All as per Srl item No 155 here-in-before but edges of concrete slab

M&L cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, coping, benching, roof kerb or mud stops, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, apex stones, including form work to concrete surfaces complete all as specified & directed

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified & directed

Removal of excavated material exc 1.50 km distance & deposited where directed at a level n.exc 5 km above the starting point complete all as specified & directed

S&F in repair Vitreous China, pedestal pattern (EWC) wash down water closet pan, white including fixing bolts, connection to flushing cistern and flush pipe & drain pipe (or out going pipe) and to flushing pipe, anti-syphonage pipe, 'P' or 'S' trap etc complete all as specified.

S&F in repair plastic water closet seat, white, closed pattern ( seat & cover for Pedestal pattern EWC) with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified.

S&F concealed stop cock,15 mm bore, chromium plated ,with long shank and cup, fancy type, complete all as directed. (As new provn for Gyser)

S&F factory made PVC flush type shutter and partition of 18 mm thickness with one side lamination & other side balancing lamination sheet consisting of Carcass 18mm thick PVC sheet of density 600 / cbm manufactured by an ISO -9001-2015 certified company ,and all required brackets 5.5 screw etc. The panell shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specificationmentioned as per drawing including necessary fittings, locking and fixing arrangement ie piano hinges, handles, magnetic catches etc complete all as specified and directed

S&F bib tap, brass chromium plated fancy type, long body screwed down, screwed for iron pipe 15 mm bore complete all as specified & directed

M&L for 15mm thick rendering with redimix plaster (as per manufacturer's instruction) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra on wall of internal surfaces up to four stories bldg. complete all as specified & directed

M&L for 15mm thick rendering with redimix plaster (as per manufacturer's instruction) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra on wall and ceiling for external surfaces of up to four stories bldg.complete all as specified & directed

M&L for 10mm thick rendering with redimix plaster (as per manufacturer's instruction) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra on ceiling of up to four stories bldg.complete all as specified & directed

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150 mm complete all as specified & directed

Demolition and breaking up drain pipes, 200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) 100mm (internal dia) set in cement mortar including haunching and bed concrete complete all as specified & directed

M&L concrete bed to 150 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified & directed

All as per item No 170 here-in-before but bore of pipe 200 mm.

M&L 150 mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified.

M&L for providing reinforced concrete pipes , class NP2 laid and jointed complete with collars 200 mm dia (internal) laid in trenches & jointed etc complete all as specified & directed

Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

All as per Srl item No 174 here-in-before but for box of pipe 200mm.

Removal of entire existing water proofing treatment in any position including tarfelt plaster, lean concrete , gravels etc and removing the debirs out side MD land all as pecified and directed.

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric ( wt not less than 160 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm by forced and finishing with preventive coat with aluminium paint @ 100ml/Sqm over a coat of bitumen grade 85/25 @ 1.2 Kg/Sqm all as directed and specified. (i) A coat of bitumen grade 85/25 @ 1.2 Kg/Sqm (ii) Applying one coat of bituminous primer conforming to IS-3384 @0.3 Ltr per Sqm (iii)Laying of APP based membrane as specified thick ness and weight (Note :- Aluminium paint shall be measured and paid in respective item)

M & L for Applying two coat of aluminium paint @ 100 ml/sqm complete all as specified and directed

Supply only water proofing compound.(ISI Marked) complete all as specified & directed

M&L coloured /light shade vetrified ceramic tiles 8-10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified & directed

M & L 6mm dia powder coated aluminium decco grill, (minimum thickness of powder coating 50 micron), section No-104, 100mm aperture of hexagonal design and pattern as approved complete all as specified and directed.

S&F 150 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified & directed

S&F 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified & directed

S&F extruded brass handles, fabricated type, anodized of size 150 mm complete all as specified & directed

S&F butt hinges medium weight , of size 100mm cold rolled mild steel and fixed complete all as specified & directed

S&F for 100mm, mild steel Hasp and Staple, safty type, stove enamelled black incl bolt to hinge plate and fixed with screws complete all as specified & directed

S&F aluminum alloy door closer hydraulically regulated, desination No 1 universal type, suitable for door shutters upto 700mm in width and of weight not more than 35 Kg and fixed to door frame complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick in flooring over and including 15 mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed

S&F Venition blends with design on inner face verticle type made out of fibre cloth fixed, to wall with necessary Aluminium brackets, screws etc including Alluminium frame for venilion blinds rolling type etc all as approved by GE all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed

S&F as in repair for welding of 100mm size butt hinges medium wt cold rolled MS incl taking down shutter and refixing in same position and making good/functional incl supply of butt hinges complete all as specified & directed

M&L for repair to rolling spring, steel rolling pipe complete set with hoods including welding work etc complete all as specified & directed

M&L for replacement of MS handles 150mm long including necessary fixing & welding work complete all as specified & directed

M&L for repair to locking device cleat of rolling shutter complete all as specified & directed

Taking down existing steel rolling shutter of any size and type and S&F factory made steel rolling shutter with laths of thickness 1.00 mm without ball bearing as specified including top cover anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, push pull or manual type complete confirming to the requirement of IS 6248-1979 complete all as specified & directed

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar complete all as specified & directed

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified & directed

S&F 75mm dia of outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair angular stop cock, brass chromium plated fancy type complete all as specified and directed.

S&F in repair 50 mm bore ball brass valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified & directed

S&F in repairs brass chromium plated over head shower rose of 100 mm dia including fixing to steel pipe or union complete all as specified and directed.

M&L for flush shutters 35mm thick with solid core construction with block board core and ply wood face panes with commercial type on one side and decorative face veneer with one side including lipping/frame to match complete all as specified & directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing complete all as specified & directed

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & directed

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed

S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm complete all as specified & directed

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F in repairs 2000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed

S&F 100 mm dia grating doom of PTMT (minimum weight 25 gms) complete all as specified & directed

S & F aluminium ventilator with top hung shutter with standard aluminium section ( powder coated), with 4 mm thick pin headed glass in panels etc complete all as specified and directed

S&F vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, (excluding flushing cistern and flush pipe) complete all as specified & directed

S&F 15 mm bore concussive push button taps of cast copper alloy, screwed for iron pipe and fixed in repairs complete all as specified & directed

S&F in repair brass chromium plated Pillar cock with extension body 15 mm bore.complete all as specified & directed

S&F in repair for Counter sunk vitreous China wash hand basin,oval shape flat back, size 550x400 with waste coupling , 32 mm dia PTPT full thread complete all as specified & directed

S& Fixed in repair Vitreous China Urinal, full stall type,including fixing long screw and urinal speader PTMT of any colour fixing 15mm dia etc complete all as specified & directed

S&F towel rail 600 mm long of brass chromium plated fixed with & including chromium plated brass screw complete all as specified & directed

S&F in repair soap dish vitreous chinna white 160x180x90 etc complete all as specified & directed

Taking down cast iron pipes 100mm/75mm including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches,floors or fixed to walls all as directed including earth work, demolition of PCC / Brick work complete all as specified,and directed.

S&F 75 mm bore cast iron, sand cast ,soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors. Note :- The rate quoted by the contractor is including necessary scaffolding etc

All as per item 220 here-in-before but except pipe, any type for and any dia

S&F CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore pipe complete all as specified & directed

S&F 75 mm dia cast iron cowls complete all as specified & directed

S&F CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door for 100 mm bore pipe complete all as specified & directed

S& F in repair vitreous china partition , coloured of size 700 x 340 x 120 mm with all fittings complete all as specified & directed

S&F in repairs galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples.

Repairing/ welding to steel windows including making functional for easing and opening and closing and repalcing unserviceable parts complete all as specified & directed

S&F 32mm dia LDPE 6kg/cm2 for waste pipe of wash hand basing complete all as specified & directed (Note :- Length of waste pipe shall not be less than 75 cm)

S&F 40mm dia LDPE 6kg/cm2 for waste pipe of urinal (length of waste pipe shall be as per site requirement) complete all as specified & directed

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devetailed or welded. complete all as specified & directed

All as per item no 230 here-in-before without glazing bars.

S&F steel ventilators with side hung shutters including projecting type hinges with steel handles,steel peg stays complete with glazing bars dovetailed or welded,complete all as specified and directed.

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty in squares exc. 0.5 sqm each pane complete all as specified.

S&F in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame works including teak wood beading 20mm thick as in shutters of cupboards, shelves, etc complete all as specified and directed.

S&F for continuous (Piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) in 40mm all as specified and directed.

M&L RCC (1:1.5:3) (using 12.5mm graded stone aggregate) for facia of parapet 60 cm height all around of ground floor buildings using reinforcement bar including required form work scaffolding centtering/shuttering all as directed Note -: (1) Reinforcement will be measured and paid seperately. (2) Demolition not required due to building facia fallen down, No any new provision exsiting facia reconcrete.

M&L ATT along the external wall below concrete or masonry apron using chemical emulsion @2.25litres per linear metre including drilling and plugging holes etc.in apron,complete all as specified and directed.

S&F 20mm outer dia CPVC tank adaptor complete all as specified & directed

S&F 25mm outer dia CPVC tank adaptor complete all as specified & directed

S&F 40mm outer dia CPVC tank adaptor complete all as specified & directed

S&F 20mm outer dia CPVC brass elbow complete all as specified & directed

S&F 20mm outer dia CPVC male brass threaded adapter (MTA/BTA) complete all as specified & directed

S&F 20mm outer dia CPVC brass Tee complete all as specified & directed

Description of Work / Item(s)

Amount

Taking down carefully the old U/S Aluminium/copper point wiring (light, fan, socket or power) complete fitting such as switches, ceiling roses, pendants, sockets, regulators, etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified & directed

M&L for point wiring multi stranded complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through suitable concealed PVC conduit and including replacement of modular sunken pressed steel terminal boxes 2mm thick of required size and modular white cover plate with all accessories including 1.5 sqmm multi stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and directed . Note :- 1. The Rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 and same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash complete. 2. At roof slab where there is burnt/blockage in the existing conduit wiring will be done through PVC conduit and rate are inclusive in above quoted item. (a) All as per item No 2 but One light /fan/Bell point/security light controlled by one way switch

(b) All as per item No 2 but One 3 pin socket outlet 5 amps on same board

(c) All as per item No 2 but One 3 pin socket outlet 5 amps point independent board with cable 2.5 Sqmm for main current and 2.5 sqmm as earth wire as power point.

(d) All as per item No 2 but 3/6 pin socket outlet, 15 Amps on independent board with cable 2.5 Sqmm for main current and 2.5 Sqmm as earth wire as power point” Notes :- One power point/AC point wiring shall be provided on one circuit of one point only.

(e) All as per item No 2 but One light point controlled by two 2-way switch 230 volts.

(f) All as per item No 2 but for One 3/6 Pin socket outlet 20 Amp on independent board with cable 4 Sqmm for main current and neutral and 4 Sqmm as earth wire as AC point cable 4 Sqmm for main current and 4 sqmm as earth wire as power point.

S&F in replacement of Switch modular type, 1Module, 6 Amps one way complete all as specified and directed .

S&F in replacement of Socket outlet modular type 2M, 2/3 pin, 6 Amp complete all as specified and directed .

S&F in replacement of Switch modular type 1M 6 Amp 2-way complete all as specified and directed .

S&F in replacement of Socket outlet modular type 2M, 2/3 pin, 16 Amp complete all as specified and directed .

S&F in replacement of Switch modular type 1M, 16 Amp with red indication light complete all as specified complete all as specified and directed . Notes :- (i) Electric switch for geyser of 16 Amps shall be provided on main switch board of the bathroom and socket outlet shall be provided near the geyser and will be measured as 16 Amps power point wiring against item No 2.00(d) here-in-before.

S&F surface mounting LED Integrated Aluminium Batten luminarie Polycarbonate co-extusion tube for 20W LED light housing. Fixture should have minimum system lumen of 2000lm & minimum efficacy at system level >=95lumens/Watt, life of fixture 25K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.90 THD<20% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

S&F of Wall mounted LED Integrated Batten 10 Watt-2 Ft White, indoor decorative PVC extruded LED battern -integrated type complete all as speficied and directed

S&F battan of holder PVC insulated body complete all as specified and directed

S&F of LED lamp 12 Watt LED Bulb complete all as specified and directed.

S&F in replacement of Electronic fan regulator, modular type 2M, 8 steps, complete all as specified and directed .

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade, 30 cm long down road, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply including taking down old ceiling fan and depositing to MES store yard complete all as specified and directed.

M&L for opening of hole through out the wall as suitable for exhaust fan of size 300 & 450 mm sweep and fixing of nut-bolts with anchor fastner of suitable size and making good the disturbed surface and all as per site requirement complete all as specified and directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.

S&F of steel body exhaust fan 300 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with complete all as specified and directed. including taking down old ceiling fan and depositing to MES store yard.

S&F of steel body exhaust fan 450 mm sweep, 230 Volts with louver and copper wound including necessary electric connection with appropriate size of PVC copper wire from ceiling rose/switch board to exhaust fan including fixing of nut-bolts of suitable size and making good the disturbed surface of wall with OBD/White wash to match with complete all as specified and directed including taking down old ceiling fan and depositing to MES store yard.

S&F of ceiling rose surface minimum size 65x50mm with two/ three terminals complete all as specified and directed

S&F water storage heater 25 ltr capacity, 5 Star rated , vertical type, AC, glass line, Single Phase electric, 230 Volt, complete with heating element, thermostat, 3 core lead, plug top, safety valve, non Return Valve, temperature indicator and including electric and water connection with suitable nut, bolts & washers and making good to disturbed surface complete all as specified and directed

S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed.

S&F in replacement of sheet metal enclouser V TPN 4 way for MCCB 125 A, 4P incomer, double door DB, IP-54, bus bar, neutral link , earth bar and din rail complete all as specified and directed

S&F in replacement of MCCB 125 Amps, 4 pole, 415 Volts with 25kA including electrical connection with incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed

S&F in replacement of MCB DB SPN 8 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having100 Amps rated bus bar complete all as specified and directed

S&F in replacement of MCB DB SPN 4 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed

M&L in replacement MCB SPN 'C' curve 40 to 63 Amps 240 Volts , 10 KA complete all as specified and directed

M&L in replacement MCB SP 'C' curve 06 to 32 Amps 240 Volts complete all as specified and directed

M&L in replacement MCB SP 'C' curve 40 Amps 240 Volts complete all as specified and directed

S&F surface mounting LED building security light fitting 20W including fabrication of GI bracket 25mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut bolts & washer etc. Fixture should have minimum system IP 66, lumen of 2000lm & minimum efficacy at system level >=100lumens/Watt, life of fixture 25K Hrs, CCT 4000-6500K with same lumens/w CRI>70, PF>0.90 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing as directed

Taking down unserviceable submain wiring twin core any size complete and making good the dusturbed surface complete all as specified & directed

M&L for submain wiring of two runs of 6 Sqmm size for main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked , drawn PVC conceiled conduit of size 25mm dia with complete all as specified and directed Note for Srl item No 30 (a) Two runs of main cable and one run of earth cable all together shall be considered as one length. (b) New conduit of suitable size with connected fitting will be laidif there is any damaged/blockage and found steel conduit in the existing conducting including including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S&F in replacement of 20 Amps MCB modular type 2 Module complete all as specified and directed . Notes :- (i) 20 Amps MCB for AC shall be provided on down side of window of suitable height and socket outlet shall be provided of suitable height as tube light fitting

S&F of electric bell ding dong AC, 230 volts single phase complete all as specified and directed

S&F in replacement of Bell push modular type 1M 5/6 Amp complete all as specified and directed .

Taking down of ceiling fan and keeping in safe custody and refixing it back after completion of point wiring complete all as specified and directed at site.

Taking down of exhaust fan and keeping in safe custody and refixing it back after completion of point wiring complete all as specified and directed at site.

S&F in replcement of Wall mounting 10 Watt LED decorative wall light fixture made up of Polycarbonate, with suitable with all connection all as specified and directed.

S&F in replacement Surface mounting round shaped LED downlighter with durable housing with Al heat shrink with diffuser to give glare free light 10 Watt LED 6000K/6500K lamp type from ceiling of stairs/common areas, complete all as directed.

S&F in replacement of RUGBY Type 10 LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as directed.

Taking down Electric/Electronic KWH meter and refixing it back after Submain wiring and connecting up complete.

S&F in replacement Sheet metal enclosure of size 350 x300 x 150 mm suitable for mounting Single phase electric meter fabricated from 2mm thick CRCA sheet with anti corrosive dust and vermin proof. Note:- The meter cover shall have a fully transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover all as specified and directed.

Taking down of 25 ltr geyser and keeping in safe custody and refixing it back after completion of point wiring completed all as specified and as directed

S&F Flame proof point wiring with single core PVC insulated and unsheathed 1100 volt grade (FR-LSH) electric cable with multi stranded copper conductor of size 1.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia concealed type including all flame proof conduct fittings and accessories such as tees junction boxes, suitable for one light controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire PVC insulated unsheathed 1100V grade cable with stranded copper conductor of size 1.5 Sqmm and connected to earth dolly complete conforming to IS-694 all as specified and directed

S&F flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 16 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc duly tested & certified by CMRI-Dhanbad complete all as specified and directed

Supply and fixing LED light fitting 1x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified & directed

S&F Flame proof distribution board for mounting MCBs/RCBO's ELCB etc. as per IS specification and CMRI approved of factory made fabricated out of cast aluminium alloy LM-06 gray epoxy powder coated finish, fitted with DIN Channel neutral link, Earth links and 200 Amps rated bus bar. The DB shall be having with IP-65 protection. The DBs shall also be consisting and including the following:- (a) RCBO 230 volts AC 50Hz 40 Amps - 01 No. (c) MCB single pole 240 volts AC 50 Hz 10 Amps - 2 Nos.

M&L for taking down of complete lighting arresting grid of copper strip on room of MT FOL store and wall from 04 Nos of earth pit including saddle complete all as specified and directed

M&L for installation, testing & Commissioning of completed lighting arresting grid of copper strip on room of MT FOL store and wall from 04 Nos of earth pit including saddle retried from item No 46.00 here-in-before complete all as specified and directed

M&L for safely taking down of solar water heating system (Flat Plate Collector 15 Nos of 100 LPD) with heat exchanger, 1500 Ltr tank-01 No and connected piping including disconnection of electric connection, submain wire, MCB, DB, PVC tank 1000ltr, MS Framed bracket of angles complete outgoing and incoming PPR water pipe and shall be kept in safe custody complete all as specified and directed Note :- If any items damage occurred solar items during execution of above any items shall be replaced with new, no extra payment shall be made in this effort.

M&L for installation, testing & Commissioning of completed solar heating system retried from item No 48 here-in-before complete all as specified and directed

Supply ,laying and testing in replacement of cable XLPE insulated screened PVC bedded ,galvanized steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 50 sqmm ,3.5 core including suitable existing GI Pipe complete all as specified and directed

M&L for excavation of trench not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for poles, stay assembly and laying cable etc and getting out in soft/loose soil complete all as specified and directed

M&L for sand filling under floors or in foundations including watering consolidation complete all as specified and directed

Supply and laying old size brick covering common burnt clay building bricks sub class 'B' designation 75 of size 230x115x75mm complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exe 25 cm complete all as specified and directed

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

M&L for excavation of existing LT Cable of any size and taking it out from the floor/protection pipe and including incomer electrical connection of in 4 P MCCB of V – TPN with suitable size of thimble complete with returning filling and make good of excavated surface/floor complete all as specified and directed

Supply and fix in replacement of MCB DB SPN 12 Way with metal double door, (IP-43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed

Description of Work / Item(s)

Amount

Surface dressing not exceeding 15 cm deep and getting out in soft / loose soil complete all as specified & directed.

Excavation in trenches n.exc 1.5 m wide & n exc 1,.5 m in depth for foundation etc in hard/dense soil complete all as specified & directed.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified.

M&L for PCC 1:3:6 Type C-1 (20mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified & directed.

M&L Rendering 15 mm thick of fair faces of brick work or concrete surfaces in CM 1;4 complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and appling two coats white washing complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base complete all as specified & directed.

M & L Machine pressed pre cast concrete inter locking paver block 80mm thick M-35 grade with grey cement and pigment & glossy finished any shape colour, size complete all as specified and directed.

M&L for sand cushion under layer of floor complete all as specified & directed.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm using hard/ dense soil complete all as specified and directed.

India Guniting Corporation

M/s Arihant Builders

AMIT ASSOCIATES

Third Wave Services Pvt Ltd

ASSOCIATED CONSTRUCTION CO.

M/s Matadeen Ramchandra Agarwal

Global Enterprises

AMIT ASSOCIATES

Global Enterprises

India Guniting Corporation

M/s Arihant Builders

Third Wave Services Pvt Ltd

GOYALA INFRA PROJECTS PVT LTD.

M/s Matadeen Ramchandra Agarwal

Global Enterprises

AMIT ASSOCIATES

GOYALA INFRA PROJECTS PVT LTD.

Third Wave Services Pvt Ltd

M/s Arihant Builders

India Guniting Corporation

M/s Matadeen Ramchandra Agarwal

AMIT ASSOCIATES

India Guniting Corporation

GOYALA INFRA PROJECTS PVT LTD.

Third Wave Services Pvt Ltd

M/s Matadeen Ramchandra Agarwal

Global Enterprises

M/s Arihant Builders

Bidder Name

AMIT ASSOCIATES

Global Enterprises

Third Wave Services Pvt Ltd

GOYALA INFRA PROJECTS PVT LTD.

M/s Matadeen Ramchandra Agarwal

M/s Arihant Builders

India Guniting Corporation

ASSOCIATED CONSTRUCTION CO.