SPL REPAIR TO CHAIN LINK FENCING IN CERTAIN LOCATIONS AT UDAIPUR MILITARY STATION

Amount

Demolition of brickwork or stone/boulder masanory below or above ground level and removing material from site complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hadr/dense soil.

Removing excavated material (soils) not exc. 500 m and depositing in soft/hard soil, where directed, complete all as specified and as directed.

Material & Labour cement concrete in foundation filling incl mass concreting PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by the EIC.

Material and Labour for reinforced cement concrete M-25 (using 20mm graded aggregate) nominal Mix as in column footings & bases for columns all as specified and directed.

Material and Labour for reinforced cement concrete M-25 (using 20mm graded aggregate) nominal Mix as in columns, pillars, piers, posts and struts all as specified and directed.

Material and Labour for formwork to sides of concrete foundations, footings, bases of colmns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work as specified and directed.

Material and Labour for formwork to sides of pillars, posts, sturts, piers, columns and stanchions square, rectangular or polygonal all as specified and directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia all as specified and directed.

Ditto- but 6mm to 8mm dia (as in stirrups).

Material & Labour brick work with old size fly ash bricks straight or curved on plan exc. 6 M mean radius built in CM 1:6 all as specified and directed.

Material and Labour Rendering 15mm thick on fair faces of concrete block masonry in cement concrete 1:4 cement and finished fair and smooth all as specified.

Material and Labour for preparation of new or prevously untreated plastered surfaces of walls and applying two coats of cement base paint , white or tinted complete all as specified and directed.

Dismantling fencing wire mesh (Chain Link Fencing/barbed wire) from Angle Iron posts, wooden post or RCC posts etc, complete all as specified and as directed by the EIC.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground any dia (Posts embedded in Concrete, brick work, ground masonry, etc), complete all as specified and as directed by the EIC.

Excavating in post holes (or similar holes) each n.exc 0.5cum, getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick, complete all as specified.

Material and labour plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in bed block of steel post complete all as specified.

Supply and fixing MS angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) as in posts to fencing etc fixed in position conforming to Fe-410 (Gde E-250) (quality-A), complete all as specified and directed.

Supply and fixing mild steel work as in flats to secure posts and struts in fencing/chain link fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, or welding etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Supply and fixing steel work in tublar pipes (hollow) square or rectangular including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A in framed work as in doors or gates of pipes or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to fe-410-W (Gde-E-250) quality-A complete all as specified as directed.

Supply only chan link fencing of mild steel galvanised dia of wire 4.00 to 4.50mm thick and mesh size 50 x 50mm complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed by the EIC.

Supply & Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long and dia of bolt 11 to 15mm complete all as specified and as directed.

Material and Labour for two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified.

Punjab Traders (BID ID -3120215)

YAGYA AGARWAL CONSTRUCTIONS AND INFRA SOLUTIONS PVT LTD (BID ID -3121460)

naveen enterprises (BID ID -3122048)