SPECIAL REPAIRS TO BUILDING NO T 130 PROVN OF GEYSERSANDCERTAIN OTHER SANCTIONED WORKS AT VAIRENGTE UNDER GE SILCHAR

Amount

PART-I (B/R WORKS) Excavating in post holes (or similar holes) each n exc 0.5 cum each, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil , complete all as specified and directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc. and getting out in soft / loose soil complete all as specified and directed.

Excavating Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in with soil obtained from excavation including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified & directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness as in roof coverings, chajja, wall clading and the like complete all as specified and directed.

Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in cover slab (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections complete all as specifed and directed

Taking up or down 20 mm bore steel tubing and connections complete all as specifed and directed

Dismantling timber scantlings 40 sqcm and over in section, in any position, unframed work, etc complete all as specified.

Dismantling timber boarding of any description fixed in any position with nails complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( not hacking) removing serviceable tiles to store and rubbish off the permises, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secruing with clips complete all as specified and directed.

All as per Srl item No 20 above but but 6 to 8 mm dia.

All as per Srl item No 20 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Material and labour for formwork to sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and directed.

Material and Labour for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of conrete flats, treads, breaks in floors, window cills, conrete railing, openings in corete wlls, floor and roofs n. exc 20 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but n exc 20 cm wide for rough finished flat surface of concrete complete all as specified and directed.

M&L for formwork to edges of conrete flats, treads, breaks in floors, window cills, conrete railing, openings in corete wlls, floor and roofs n. exc 10 cm wide and side of RCC/PCC bands in walls, horizontal or sloping and similar works exc 5 cm but n exc 10 cm wide for rough finished flat surface of concrete complete all as specified and directed.

M&L for Reinforced cement concrete Design mix (M-25) using 20 mm graded aggregate in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Design mix (M-25) using 20 mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50 mtr span complete all as specified and directed.

M&L RCC type B1 1:2:4 (20mm graded aggregate) as in cill bands and like, complete all as specified and directed.

Material and labour brick work with sub class ‘B’ brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for half brick work with sub class ‘B’ brick straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

S & F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Anodised aluminium frame for doors, windows (3track/2track) ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F Anodised aluminium doors, windows and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) for door hinges type B-21 100mm long (3 No.) suitable handle (2 No.) complete all as specified and directed.

Supply and fix 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply and fix 150 mm long aluminium handle cast type anodised complete all as specified & directed.

Supply and fix 100mm stainless steel butt hinges medium weight fixed with stainless steel screws, complete all as specified and directed.

Supply and fix 100mm mild steel butt hinges medium weight complete all as specified and directed.

Supply and fix Wire netting of size of mesh in 25 mm of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putting square exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putting squareexc 0.5 sqm in each pane complete all as specified and directed.

S&F 4.00 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for Anodised aluminium Door closer hydrau lically regulated,designation No. 1 universal type,suitable for door shutters up to 700 mm in width and of weight not morethan 35 kg and fixedcomplete all as specified and directed.

M & L for Mortice lock,vertical type, size 100 mm complete all as specified and directed.

M & L for Anodised aluminium snap grid frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long as specified Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed.

M & L for 12mm Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

Supply and fix in repairs 20 mm dia MS chromium plated fancy type curtain rods with brackets, stops, roller etc complete all as specified and directed.

Supply and fix aluminium channel for securing wire mesh of suitable size complete all as specified and directed.

Supply and fix Rubber beading for securing glass of suitable size complete all as specified and directed.

Supply and fix door brush in vertical style for air insulation complete all as specified and directed.

M&L rendering 15 mm thick cement rendering on fair faces of brick wall or concrete surfaces in CM (1:4) finished fair and even complete all as specified & directed.

M&L rendering 15 mm thick cement rendering in two layer each of 10+5 mm thick on fair faces of brick wall or concrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even complete all as specified & directed. Note -WPC shall be measured and paid separetly.

M&L 15 mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Supply only WPC complete all as specified and directed.

M&L for , cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for Loose filling with broken stones aggregate of gauge 40 to 80 mm as in backside of weep holes, complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone as in subbase of floor complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen & 3 parts of sand complete all as specified and directed.

Material and labour for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone as in floor , finishing cement concrete surface even and smooth without using cement extra cement complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate in foundations, filling and mass concrete in surface channels and drains complete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & directed.

M & L for Providing, plain cement concrete in PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregatesin as in benching / haunching to manholes rounded or chamfered complete all as specified & directed.

M & L for Providing precast plain cement concrete in PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregatesin as in landings, cover slabs (for man holes etc.) set in CM 1:6 incl formwork complete all as specified & directed.

M & L for rubber moulded chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry (with white cement and pigment ) in floors over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

S&F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

S&F Non Skid ceramic tiles colour 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 including brushing with neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

S&F Glazed ceramic colur tiles (450x300 x 7mm thick) in dado & skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick rendering rough/even & fair finished in cement mortar 1:4 to receive tile complete all as specified and directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified & directed.

M&L for Plates (plain or chequered) Fe 410 -W (Gde E- 250) quality A channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix tubes 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, Cutting cheses for concealed water tubing and making good with concrete mortar 1:3 and surface shall be match with existing surface by using tiles, putty, pop etc and applying finishing coat of existing treatment complete all as specified and as directed.

S&F GI tube 15 mm bore (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

S&F GI tube 20 mm bore (ISI Marked) medium grade galvanished with all fittings laid in floors or fixed to wall etc. complete all as specified and directed.

Supply and fix, white vitreous china wash basin of size 550 mm x 400 mm including brackets ,cutting for and pinning in ends of brackets complete all as specified & directed.

Supply only 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as specified & directed

S&F for 15mm bore Stop valves, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix 15 mm bore bib tap long body and fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix 15 mm bore pillar tap fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix 15 mm bore stop valve fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix, angle valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

S&F chromiuim plated Swivel shower roses with arm, 125 size including fixing to 15 mm bore GI pipe or union complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts , length 450 mm complete all as specified and directed.

Supply and fix hot water outlet connection made of brass chromium plated with union rubber washer suitable for 15mm bore GI pipe for water complete all as specified and directed.

S&F Glass shelf assembly complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply & fix PVC 75 mm dia cowl incl jointing with solvent cement complete all as specified and directed.

Supply & fix PVC (SWR) P trap 110 mm outlet diameter including jointing with solvent cement complete all as specified and directed.

Supply & fix PVC (SWR) floor trap 75 mm outlet diameter, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fix Grating doom 125 mm dia of PTMT (Minimum weight 40 gms) complete all as specified & directed.

Supply and fix Grating square 150mm size of PTMT (Minimum weight 100 gms) complete all as specified & directed.

Supply & fix 32 mm size PVC Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms ) complete all as specified and directed.

Supply & fix PVC waste pipe 32 mm bore for WHB complete all as specified and directed.

Supply and fix vitreous china wash down water closet pan of padestel pattern white with P or S trap including Plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed

Supply and fix in repair vitreous china water closet (squatting pan), "Orissa" Pattern, size 580x440 mm white, with integral foot rests (excluding flushing clstern and flush pipe) complete including provision of cement concrete bedding all as specified & directed.

Supply and fix 75 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to walls with suitable size of clamps , nuts bolts complete all as specified and directed.

Supply & fix PVC (SWR) Pipe 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

M & L for Concrete bed in PCC 1:3:6 type C-2 using 40 mm graded stone aggregates to 110 mm bore drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints,fixed to walls with suitable size of clamps , nuts bolts complete all as specified and directed.

Supply & fix PVC (SWR) Pipe 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply and fix Soap dish, Chromium plated fixed with CP brass screws complete all as specified & directed.

M&L for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges as in repairs complete all as specifed and directed

S & F Chromium plated hand free type jet spray with 1 mtr long easy flex tube for fixing with 15mm pipe suitabe for fixing with padestal pattern water closet complete all as specified and directed. Make: Hindware Cat Part No. SS-304 or equivalent make of Jaquar(Continental) /Marc/ Parryware

S & F Chromium plated health faucet with 1 mtr long easy flex tube for fixing with 15mm pipe alongwith wall hook complete all as specified and directed. Make: Hindware Cat Part No. F160027 or equivalent make of Jaquar(Continental)/Marc/ Parryware

Supply & fix Plastic water closet seat cover , black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed.

Supply and fix 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

Supply & fix on site LLDPE conventional septic tank designed to carry sewage and sludge water etc , incl earthwork & fondation in PCC 1:4:8 8 type D-2 as per manufacturers instructions complete all as specified and directed.

M& L for soakage well `of size 2.4 x 3 mtr incl earthwork in any type of soil , foundation in PCc 1:3:6 type C-2 , honey comb brick masory in CM 1 , RCc cover slab in M-25 / complete ;all as specified & directed.

M&L for 1mm thick wall care putty on wall to make surface even and smooth complete all as specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on surface walls complete all as specified and directed

Material and labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of alkali resistant primer complete all as specified and directed.

]Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on new wall surfaces complete all as specified & directed

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm in width or girth & applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F brass 4 lever Mortice lock, vertical type, size 75mm , complete all as specified and directed.

PART-II (E/M WORKS) Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc complete all as specified and directed.

Dismantling of old unserviceable main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall complete all as specified and directed.

M&L for Point wiring using FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including PVC casing capping of suitable size with all fitting and fixture accessories on roof, wall, celling etc terminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63 mm beyond 200 x 300 mm ) duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.

All as per item No. 124 above but for one 3 pin socket outlet point, 5 Amps control by one switch on independent board complete all as specified.

All as per item No. 124 above above but for one 3 pin socket outlet point, 5 Amps control by one switch on same board with other switches complete all as specified and directed.

All as per item No. 124 above above but for one 15 Amps socket point control by one switch on independent board with 2.5 Sqmm size PVC insulated unsheathed multi-stranded copper conductor cable with 2.5 sqmm PVC insulated unsheathed single core copper conductor earth wire complete all as specified and directed.

M&L for Point wiring using 1100 volt grade FRLSH PVC insulated unsheathed multi strand copper conductor cable 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand 1100 volt grade copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing including connection of cable with MCBs or bus bar shall be done through proper size copper/brass thimble of pin/u type etc for one light/fan/bell point complete all as specified and directed.

All as per item No. 128 above but for one 3 pin socket outlet point, 5 Amps control by one switch on independent board complete all as specified.

Supply and fix Ceiling rose, PVC/ polycarbonate, isolated body complete all as specified & directed.

S&F switch piano flush type 5 Amp one way complete all as specified and directed.

S&F Bell push, flush type, 5 amp complete all as specified and directed.

S&F Bell, AC, 230 volts, single pole ding dong complete all as specified and directed.

Supply and fix switch socket outlet 3/5 pin 5 Amps flush type complete all as specified and directed.

Supply and fix switch socket outlet 3/5 pin 5/15 Amps flush type complete all as specified and directed.

S & F Angular Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings with 10 watt B22 CDL 3 star LED lamp complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder and connecting with & incl 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make : Havells Cat Part No. HEXAFIT10WLED857SSYMBOPC or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton

S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with & incl 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. LDLSR20-CDL or equivalent to Bajaj/ Philips/Wipro/Syska LED/ M/s Jaquar & Company Pvt Ltd/ Havells

S&F LED 10 watt recess mounteddownlighter with pressure diecast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver and connecting with & incl 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. LDLSR20-CDL or equivalent to Bajaj/ Philips/Wipro/Syska LED/ M/s Jaquar & Company Pvt Ltd/ Havells

Supply and fix street /bldg security light LED luminaire 25 watt IP 66 LED lamp, driver etc, including wall bracket 1.5 mtr long made out of 40 mm bore GI light grade pipe with suitable siz of clamps nuts bolts & all accessories & making connection with FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde complete all as specified and directed. Make: Crompton Cat No. LSTS-25-CDL/NL- M or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Havells

Supply and fix Geyser (water storage heater) of capacity 50 ltr, 5 star rating with 2KW heating element including fixing on the wall with 12 mm dia x 100 mm long GI fastner, nut and bolt by grouting at required position including testing on completion including making all necessary water supply and electric supply connections to water Geyser from existing point and also inclusive of making good to distrubed surface with existing surface complete all as specified and directed. Make :- Crompton Cat Part No Radient Dlx 50 L or equivalent in Bajaj/ Havells / Venus

Supply and fix Geyser (water storage heater) of capacity 25 ltr, 5 star rating with 2KW heating element including fixing on the wall with 12 mm dia x 100 mm long GI fastner, nut and bolt by grouting at required position including testing on completion including making all necessary water supply and electric supply connections to water Geyser from existing point and also inclusive of making good to distrubed surface with existing surface complete all as specified and directed. Make :- Crompton Cat Part No Versa 25 L or equivalent in Bajaj/ Havells / Venus

Supply and fix sheet metal enclosure powder coated tripplle phase and neutral DB for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix sheet metal enclosure powder coated single phase and neutral DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.

Supply and fix MCB SP 240 volts, 50 Hz capacity 6-32 Amps all as specified and directed

Supply and fix MCB SPN 240 volts, 50 Hz of capacity 40 Amps all as specified and directed

Supply and fix MCB TPN 240 volts, 50 Hz of capacity 63 Amps all as specified and directed

M&L for fan hook fabricated with MS flat 25x6mm 300 mm long 02 nos bend to shape drilled with holes and MS nuts ,bolts and washers of required side with one coat of primer and two coats of synthetic enamel paints complete all as specified and directed

Taking down Ceiling fan of any size/sweep for replacing bearing, bush or for rewinding after disconnecting the wire from existing ceiling rose and refixing the same after rewinding with super enamelled copper winding wire incl. cleaning dust, oiling greasing, servicing and replacing bearing, gun metal bush, rubber reel with clamp and nut-bolt, washer, lock pin, excellation gear sytem, boby painting etc as existing including connecting flexible 3 core cable from ceiling rose to connector of fan complete all as specified and directed.

Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10 Sqmm 4 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimbles incl taking out existing unserviceable cable complete all as specified and directed.

Supply, fixing, commioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 10 Sqmm 2 core laid in trenches/fixed to wall/under road/pipe etc with and including copper cable glands & copper thimbles complete all as specified and directed.

Material and labour for laying of bricks locally available sub-class 'B' brick (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the directon of cable complete all as specified and directed.

Supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. Note:- Thickness of sand cushion after punning down will be measured and paid separately.

Material & labour GI tube light grade 40 mm bore for protection of UG cable including taking out of old unsv pipe complete all as specified and directed.

M & L for circuit /submain wiring along with earth wire 2 x 2.5 Sqmm PVC FRLSH insulated unsheathed cable multi-strand copper conductor including 1 x 2.5 Sqmm PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing incl taking down old unserviceable submain wiring complete all as specified and directed. Note: Two run of single core cable and one run of earth wire will be mearsured as one length

M & L for circuit /submain wiring along with earth wire 2 x 6 Sqmm PVC FRLSH insulated unsheathed cable multi-strand copper conductor including 1 x 6 Sqmm PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including concealed PVC conduit of appropriate size not less than 20 mm dia and 1.8 mm thick including all fittings viz tees, bends, junctions box , connecting earth including cutting groove for concealed wiring, making good to disturbed surface of wall/floor with cement mortar and finishes to match existing incl taking down old unserviceable submain wiring complete all as specified and directed. Note: Two run of single core cable and one run of earth wire will be mearsured as one length

Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :- Crompton Cat aprt No BRISK AIR NEO ( ISI Marked) or equivalent in Havells / Bajaj / Orient

Supply and fix sheet metal enclosure have Metal clad plug & socket two pin and earth with MCB SP 10 Amps C-curve complete all as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI medium grade watering pipe 20 mm bore &15 mm bore GI light grade protection pipe , wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with concrete pit in PCC 1:3:6 type C1, 50 mm thick pre cast RCC 1:2:4 type B1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance not exceeding 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES Schedule 2009, Part-I complete all as specified and directed.

SURANA CORPORATION

M/S SANJIB DEB

M/S R A ENTERPRISE

M/S LUIT CONSTRUCTION

M/S Goutam Chakraborty

M/S RAJU ENTERPRISES AND BROS