Procurement of Refuse Collector for door to door collection of waste in CMC Sira

The tenderer should be a manufacturer who must have manufactured tested and supplied the equipment s similar to the type specified in the Schedule of Requirements up to at least i.e,. 01 Nos of refuse collector vehicle . usually not less than 80 percentage of the requirement. However, it will be 40 percentage with respect to Micro and Small Enterprises of quantity i.e,. 01 Nos of refuse collector vehicle required in any one of the last 3 years,2 years for Micro and Small Enterprises i.e. from financial year 2021-22 to 2023-24. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after 2022 and be in satisfactory operation for 12 months as on date of tender opening.

Detailed description of the essential technical and performance characteristics of goods

Tenders of tenderers quoting as authorized representative of a manufacturer meeting with the above requirement in full can also be considered provided 1 The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per GCC and SCC and 2 The tenderer, as authorized representative, has supplied, installed satisfactorily at least 01 Nos of refuse collector vehicle of the quantity similar to the type specified in the schedule of requirements in any one of the last 3 years i.e. from financial year 2021-22 to 2023-24 The equipments offered for supply must be of the most recent series models incorporating the test improvements in design.The models should have been released on or after 2022 and be in satisfactory operation for 12 months as on date of tender opening

Tenderer should submit Certificate of registration of the Company under the companies act, 1956 or registered with the Concerned Statutory Authorities under relevant act. If the Tenderer is manufacturer then should posses ISO registration certification copy and the both should be enclosed

the average financial annual turnover of the tenderer should be Rs.1105222 Usually not less than the estimated cost of the quantity in the tender document. It will be 50 percentage of the estimated cost of the quantity with respect to Micro and Small Enterprises during the last three preceding financial years last two preceding financial years with respect to Micro and Small Enterprises ending on the relevant financial year

The tenderer should be a manufacturer who must have manufactured tested and supplied the refuse collector vehicle similar to the type specified in the Schedule of Requirements up to at least 01 Nos of refuse collector vehicle as per the document usually not less than 80 percentage of the requirement. However, it will be 40 percentage with respect to Micro and Small Enterprises of quantity i.e,. 01 Nos of refuse collector vehicle required in any one of the last 3 years, 2 years for Micro and Small Enterprises i.e. from financial year 2021-22 to 2023-24. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after 2022 and be in satisfactory operation for 12 months as on date of tender opening

Tenders of tenderers quoting as authorized representative / dealer of a manufacturer meeting with the above requirement in full can also be considered provided The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per GCC and SCC. Manufacturers authorization form to be provided as per section XIII of the tender document

The tenderer, as authorized representative, has supplied, installed satisfactorily at least 80 percentage i.e,. 01 Nos of refuse collector vehicle of the quantity similar to the type specified in the schedule of requirements in any one of the last 3 years i.e. from financial year 2021-22 to 2023-24 The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after 2022 and be in satisfactory operation for 12 months as on date of tender opening. Certificates to be provided as per section XII of the tender document

The legal status, place of registration and principal place of business of the company or firm or partnership

A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser

Tenders of tenderers quoting as authorized representative / dealer of a manufacturer meeting with the above requirement in full can also be considered provided The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per GCC and SCC. Manufacturers authorization form to be provided as per section XIII of the tender document

The tenderer should furnish the information on all past supplies and satisfactory performance for both 1a and 1b above, in proforma under Section XII

Tenderer offering to supply goods under the contract which the Tenderer did not manufacture of otherwise produce, the Tenderer has been duly authorized as per authorization form in Section XIII by the goods manufacturer or produce to supply the goods in India

Tenderer should submit GST Registration Certificate

Tenderer firm /company should not be blacklisted by any government organization. The Tenderer shall furnish an document for not having Black Listed earlier by the Firm / Company represented by its Proprietor / Partners / Directors / Chairman / Managing Director / Office Bearers in the Business Transactions of any Government / Semi-Government / Government Undertaking / Public Sector Organizations / any other Departments