Repair to Joinery flooring plastering internal water supply etc of Transit Camp HQ Sub area Provost unit R centre Up and Down Convey ground and TA BN H Coy including Md JCO Ors Accn under AGE BRI under under GE N Udhampur

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. ,complete all as specified and directed by the Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement and with using Water proofing compound .(Water proofing compound shall be measured and paid sepratly ) ,complete all as specified and directed by the Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortor 1:6 on fair face on brick/concrete surfaces and finished even and smooth without using extra cement ,complete all as specified and directed by the Engineer-in-Charge.

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall ,complete all as specified and directed by the Engineer-in-Charge.

M&L two coats of oil bound distember over a coat of primer over two coats of approved wall care putty over and including preparation of new plastered surfaces of wall ,complete all as specified and directed by the Engineer-in-Charge.

Disconnection of existing tanks, setting side for repairing, cleaning etc and hoisting after cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 500 to n.exc 1000 ltr and including endorsed the ward ' CLEANED ON WITH DATE' with white paint including replacement of broken/unserviceable fitting such as Elbow, Tea ,socket,nipple of any size etc,complete all as specified and directed by the Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal/ Aluminium frames including punching or drilling out old glazing pins/ spring clips ,complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs 5.0 mm thick tinted Sheet glass, ordinary quality and glazing with oil putty/ Aluminium rubber beading in squares exceeding 0.5 Sq.M in each pane ,complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.M in each pane ,complete all as specified and directed by the Engineer-in-Charge.

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes ,complete all as specified and directed by the Engineer-in-Charge.

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore pipes ,complete all as specified and directed by the Engineer-in-Charge.

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 40 mm bore pipes complete all as specified and directed by the Engineer-in-Charge.

S&F 15 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors ,complete all as specified and directed by the Engineer-in-Charge.

ditto but except pipe ,complete all as specified and directed by the Engineer-in-Charge.

S&F 20 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors ,complete all as specified and directed by the Engineer-in-Charge.

ditto but except pipe ,complete all as specified and directed by the Engineer-in-Charge.

S&F 40 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors ,complete all as specified and directed by the Engineer-in-Charge.

ditto but except pipe ,complete all as specified and directed by the Engineer-in-Charge.

S&F 20 mm Gun metal , global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair ,complete all as specified and directed by the Engineer-in-Charge.

S& F 40 mm Gun metal , global or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair ,complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting chases in Brick/stone/concrete block or slab, walls , pinning in , making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing steps, cills, sunshed, shelves, lintels, etc ; and cutting chease for water tubing or concealed conduit wiring , etc, and making good cutting not exc 10 cm girth ,complete all as specified and directed by the Engineer-in-Charge.

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base to receive floor finishes including demolition and dismanling ,complete all as specified and directed by the Engineer-in-Charge.

M&L for machine pressed precast concrete rubber moulded interlocking paver block coloured approved any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade , laid over and including 30 mm thick sand coushioning complete including demolition and dismanling existing flooring , complete all as specified and directed by the Engineer-in-Charge.

S&F Machine cut kota stone slab flooring 18-20mm thick laid over & including 20 mm th cement screed in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition and dismanling,complete all as specified and directed by the Engineer-in-Charge.

ditto as above but as in skirting/dado etc. ,complete all as specified and directed by the Engineer-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match including 15 mm screed bed 1:4 cement mortar including demolition and dismanling ,complete all as specified and directed by the Engineer-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointed to match including 15 mm screed bed 1:4 cement mortar including demolition and dismanling ,complete all as specified and directed by the Engineer-in-Charge.

M&L Glazed ceramic tiles 300x450x7 mm to 8mm thick in vertical surfaces such as skirting, dadao and risers to steps over 10 mm thick in CM(1:4) incl taking down from existing surfaces including demolition and dismanling ,complete all as specified and directed by the Engineer-in-Charge.

S&F false ceiling boards of Fibre Cement Designer tile white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 1220mmx1220mm/1195mmX595mm/1220mmX610mm and any one of the design (occeanic , lake & hill, cascade or electra) fixed with screws over existing metal grid including required cutting/making opening for services like fixed over existing grid inluding necessary scaffolding etc and refixed all exesting electric wiring and fixture including demolition and dismanlingall complete at all heights as per direction of Engr-in-charge.

S&F false ceiling with Everst fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture including demolition and dismanling all complete at all heights ,complete all as specified and directed by the Engineer-in-Charge.

S&F in reapirs MS powder coated curtain rods with bracket fixed to wall with suitable screws and onion type end brackets all as per approved design/colour/pattern fixed ,complete all as specified and directed by the Engineer-in-Charge.

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) ,complete all as specified and directed by the Engineer-in-Charge.

do but n.exc 1.5 Sqm each ,complete all as specified and directed by the Engineer-in-Charge.

Taking down shutters of any descp exc 1 sqm but n.exc 2 sqm ,complete all as specified and directed by the Engineer-in-Charge.

do but re-fixing in same opening of door shutter ,complete all as specified and directed by the Engineer-in-Charge.

Cutting holes in brick walls built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc hail but n.exc one brick ,complete all as specified and directed by the Engineer-in-Charge.

S&F 125x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast etc., and back recess to be filled with pcc (1:3:6) type C-o concrete complete all as specified.

2nd class hard wood (Hollock) plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 30 mm thick Flush shutter, solid core construction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed

M&L 30 mm Glazed and skeleton shutters, 2nd class H.W open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats ,complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as dircted.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples stainless steel staples complete, all as specified and directed by Engr in Charge.

S&F in repairs galvanised mild steel wire cloth of 0.56mm nominal dia and avg width of aperature 1.40mm and fixed with MS flat iron & MS nut and screws with steel windows/vents 1st class HW beading with wooden doors/ windows etc with tinned tacks, ,complete all as specified and directed by the Engineer-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the ront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face ® ,complete all as specified and directed by the Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing ,complete all as specified and directed by the Engineer-in-Charge.

S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, ,complete all as specified and directed by the Engineer-in-Charge.

S&F Stainless Steel 'S' Shape Handles 300mm long Fancy type fixed with screws to door shutters ,complete all as specified and directed by the Engineer-in-Charge.

S&F Aluminium powder coated (match with door shutters) Hydraullic door closer suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and directed by the Engineer-in-Charge.

S&F Mortice lock with two lever MS body (vertical type) 100mm length of latch with 3 set of keys fixed in door shutter with proper in position complete all as specified.

S&F 300 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on olt plate and two on staple plate and fixed ,complete all as specified and directed by the Engineer-in-Charge.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed ,complete all as specified and directed by the Engineer-in-Charge.

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised ,complete all as specified and directed by the Engineer-in-Charge.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed ,complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs MS helical door spring 300mm size including roller and roller plate fixed to wooden or steel frames with welding/fitted with screws etc, ,complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs aluminium alloy sliding door bolt 300 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ,complete all as specified and directed by the Engineer-in-Charge.

Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair,,complete all as specified and directed by the Engineer-in-Charge.

Plastic water closet seat, closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , ,complete all as specified and directed by the Engineer-in-Charge.

S&F flush pipe with rubber washer in repairs of PVC 32 mm dia for low level cistern pipes, ,complete all as specified and directed by the Engineer-in-Charge.

S & F for waste pipe in repairs of dia 32mm for WHB/Sink, ,complete all as specified and directed by the Engineer-in-Charge.

S & F for waste pipe in repairs of dia 40mm for WHB/Sink, ,complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs 32mm bore dia of CP brass waste coupling suitable for WHB, ,complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs 40 mm bore dia of CP brass waste coupling suitable for Kitchen sink ,complete all as specified and directed by the Engineer-in-Charge.

Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repairs c,complete all as specified and directed by the Engineer-in-Charge.

Jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed in repair ,complete all as specified and directed by the Engineer-in-Charge.

Checking of joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, minor adjustment of joinery, door /windows by means of planer/chisling etc. including petty repairs material like screws/nails, plug etc. to make it functional, complete all as specified and directed. Note : 1. Any items required to be replaced shall be paid under respective items and in that case this items shall not be measured and paid. 2. The contractor or his authorised rep shall collect the complaint of all carpenter work from complaint cell /Engr-in-charge daily and all complaint will be rectified by the contractor with in same day than the returned the complaint slip after completion of complaint and get recipt from concered JE/Enge-in-charge .If he fails to complete the work with in same day then recovery will be made @50.00 per day .

s l sharma and sons

NARESH KUMAR KHAJURIA