RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Fire Suppression Foam (AFFF Concentrate For Fire Fighting) ( 5 pieces ) Technical Specifications 1/5 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC AFFF Concentrate A foam concentrate that has a fluorinated surfactant with stabilizing additive and synthetic surfactants foaming agents for Class A and B fires. * Indian/International Reference specification IS : 4989 latest and UL-162 IS : 4989 latest and UL-162 Type of Foam Concentrate Type 3 — To be used with 97 percent water and 3 percent concentrates Type 3 — To be used with 97 percent water and 3 percent concentrates AFFF Concentrate Quantity in one container 200 20.0
Required200.0 Constructional Sedimentation or Stratification properties at a temperature of 27 + 5°C (One cycle) On visual examination of foam concentrate liquid shall not show any sedimentation or stratification
Requiredcontained in a covered glass beaker for 24 h * Sedimentation or Stratification properties after freezing and thawing at –3°C to 27+ 5°C The concentrate also shall not show such sedimentation or stratification after freezing and thawing at –3°C to 27+ 5°C * Colour and Odour amber colour clear transparent liquids with no offensive odour * Packing Polyethylene HDPE containers conforming to IS 7959 * PH value 7.6 * Specific Gravity 1 * Miscibility with Water Yes * Viscosity 10 Cst max * Pour Point Zero * Sludge Content(%) Original 0.25%
Requiredconditioned 0.5% maximum * 2/5 Spreading Coefficient ≥+4.5 using moth fresh and sea water * Performance Mixing Ratio (%) 3% and 6% * Film Formatiom Yes * Expansion time at 27 ± 5 °C 6 to 12 seconds * Drainage Time at 27 ± 5 °C 90 second for 25% * Fire Control Time 60 * Fire Extinction Time 90 second for 25% * Resistant to Burn Back minimum 8 second * Sealability to pass the test as per specification * Film Forming Test as per UL-162 in compliance * Foam Quality Test as per UL-162 in compliance * Class B Fire Tests sprinklers and Spray Nozzles as per UL-162 in compliance * Class B Fire Tests Top side Discharge Devices as per UL-162 in compliance * Induction Rate Test as per UL-162 in compliance * Minimum Storage Temperature Test as per UL-162 in compliance * Certification Availability of Type Test Report to prove conformity of declared parameters from NABL accredited ILAC/Central Govt Lab as per BIS Yes * Test Report Number - * Test Report Date - * Name of the Lab where test Conducted - * Test Reports to be furnished to the buyer on demand Yes * Warranty Period 2 * Service Life warranty at consignee end 5 * 3/5 BIS Certification Marking Yes * BIS CM/L No - * UL Certification Yes * UL certification number (write NA if not applicable) - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.