Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Tenderer | |
| 2 | L2₹5.5 L+₹58,176.70 (11.8%)Rejected-Finance | L2 | Rejected-Finance Other than lowest Tenderer | |
| 3 | L3₹6.2 L+₹1.3 L (26.5%)Rejected-Finance | L3 | Rejected-Finance Other than lowest Tenderer | |
| 4 | L4₹6.3 L+₹1.4 L (28.9%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L4 | Rejected-Finance Other than lowest Tenderer |
Tender Value
₹7 L
EMD Value
₹14,000
Closing Date
12 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE (I) CIF (R) C/O 56 APO
REPAIR AND MAINT OF EXTERNAL SERVICES FOR ZONE C AREA UNDER AGE(I) CIF (R)
2023_MES_602533_1
AGE(I)/R-16/2023-24
Open Tender
Civil Works
Item Rate
120 days
Daraba
Class E and above and category a (i)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹14,000
Yes
25 Jul 2023
12 Jun 2023
19 Jul 2023
12 Jun 2023
12 Jul 2023
27 Jun 2023
Amount
Durastone heavy duty coloured tiles 10mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exxceeding 0.11 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by engineer-in-charge.
S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints incl bends as in repair, fixed to walls/floor complete all as specified and directed.
Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.
All as per description of item 4 above but except bricks complete all as specified and directed
M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water, M&L Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement as in ceiling and applying two coats of white wash complete all as specified.
Taking down cement plaster on brick or concrete surface and description including raking out joints Hacking for key scrubbing down with water, M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement mixed and including two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface and curing after applying each coat complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for keys scrubbing down with water, M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement including preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for PCC 1:2:4, type B0 using 12.5mm graded crushed stone aggregate as in roof padding/coping including necessary formwork complete all as specified and directed
Material & labour for applying one coat of synthetic enamel paint on old wooden surface on any description not otherwise described over 10cm width or girth including preparation of old painted surfaces all as specified and directed by Engineer-in-Charge.
All as per description of item 11 above but one coat of synthetic enamel paint on old steel surfaces all as specified and directed.
M&L for one coats of oil bound distemper to old plastered surfaces including preparation of surfaces all as specified and directed.
Material & labour for one coat of cement base paint including preparation of old surface to match the shade as per colour scheme as approved by Engr-in-Charge.
M&L for one coat of white wash on ceiling incl preparation of old plastered surfaces complete all as specified and directed.
M&L for applying two coats of oil bound distemper on walls including preparation of old plastered surfaces complete all as specified.
Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.
M&L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub base/Plinth protection all as spd and directed.
M&L for 20 - 25 mm thick Cement concrete tile size 30 cm x 30 cm, Machine pressed, set and jointed and pointed in neat cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6 complete all as specified and directed .
M&L for Machine pressed precast concrete interlocking paver block 60 mm thick (Factory made rubber moulded) with grey cement and pigment any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 Grade fixed all as specified and directed .
Sand filling under floors or in foundations including watering and consolidation
Demolition of cement concrete (reinforced) of any description and in any positiion specifically provided for complete all as specified and directed by engineer-in-charge.
M&L for TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending, spirally for hooping columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landing,cover slab etc including necessary formwork set in cement mortar 1:4 complete all as specified and as directed.
M & L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate for mass concrete all as specified and as directed by Engineer-in-Charge.
M & L for PCC 1:3:6, Type- C-2 (using 20mm graded crushed stone aggregate) as in surface channels & drains, complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement , including forms , moulds, mitred/ stopped ends etc. all as specified.
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 4700.00 during AOC Note:- Tenderers shall not quote for this Schedule
M/S BADRI NATH GUPTA
M/s Anil Engineers & Builders
NATIONAL TRADING COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .