SADALPUR(2nd W/W) DETAILE...

Amount

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Copper conductor: Supply, erection, testing and commissioning of IS marked 3 core copper wire with accessories like thimble lugs etc for motors in trenches or underground in PVC and flexible pipes as per entire satisfaction of Engineer-in-charge complete in all respect. 10mm2 3core

Copper conductor: Supply, erection, testing and commissioning of IS marked 3 core copper wire with accessories like thimble lugs etc for motors in trenches or underground in PVC and flexible pipes as per entire satisfaction of Engineer-in-charge complete in all respect. 50mm2 3core

WTP 1.50 MLD: Design and construction of automated PLC controlled water treatment plant as per below mentioned capacity including interconnecting DI pipe from raw water pump to inlet box of WTP, CWT and Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and all other civil / mechanical / electric installations complete in all respects as per DNIT (Sluice valves of make IVC/VAG)

CLEAR WATER PUMP: Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked 3800 LPM X 40.00 M X 60 HP

RAW WATER PUMP: Supplying, erection, testing and commissioning of Horizontal motor pumping set for Raw water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked 1900 LPM X 12.00 M X 10.0 HP

H.T. METERING PANEL: Supply, erection, testing and commissioning of 11KV Indoor H.T Metering Panel complete with suitable CTs, PTs and 3 phase, 4 wire Digital Electronic KWH Meter with accuracy class of 0.5 as per requirement and approval of DHBVN, consisting of the Cubical Panel Box of minimum size 700mm x700mm x1500mm free standing, floor mounting type made out of 14 SWG CRCA sheet steel powder coated with epoxy coated channel iron base frame Supply erection testing of standard make XLPE 3 core galvanized steel trip armored HT / 11 KV grade ISI marked cable with aluminum Conductor in ground covered with sand and brick in trenchs in pipes for making following connection a) from DHBVN G.O switch to metering equipment . b) from metering equipment to transformer c) transformer to LT panel complete in all respect . CAMPUS LIGHT: Supply erection testing of 2 No. reputed make LED light 100 wats with fittings, cable and accessories complete in all repects

PANEL BOARDS FOR MOTORS: Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 1 Pumping set a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Panel Board for motors having capacity of 10 BHP

PANEL BOARDS FOR MOTORS: Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 1 Pumping set a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Panel Board for motors having capacity of 60 BHP

Operation and Maintenance of W.T.P for complete scope of work mentioned in the DNIT and of whole existing water supply scheme in the village Disinfection material supplied by the PHED as per schedule-IV for a period of 5 years after 12 months during defect liability period and 3 months trial run period. (will be charged to the A/mtc estimate). complete in all respects as per approved NIT. 1) Operation and maintenance during defect liability period after 3 month trial run period ( operation only)

1st year Operation and maintenance after defect liability period

2nd year Operation and maintenance after defect liability period

3rd year Operation and maintenance after defect liability period

4th year Operation and maintenance after defect liability period

5th year Operation and maintenance after defect liability period

Bidder Name

Amount

SURENDER CONT(GSTN-NA)

ROHTASH KUMAR CONTRACTOR(GSTN-NA)

VINAY KUMAR CONTRACTOR(GSTN-NA)

VINAY KUMAR CONTRACTOR

ROHTASH KUMAR CONTRACTOR

VINAY KUMAR CONTRACTOR

ROHTASH KUMAR CONTRACTOR