Special repair work of non-residential office building (Superintending Engineer, Gorakhpur Circle PWD Gorakhpur) and painting work of residences in Gorakhpur

Demolishing mud phaska in terracing and disposal of material within 50 metres lead. as per DSR-15.27 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. as per DSR-15.25 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead as per DSR 15.56 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per DSR 13.91 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead as per DSR 15.12.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. as per DSR 15.60 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

PCC Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) as per (DSR-4.1.8) Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).As in item no. 3 above but for slabs (Using 1:1.5:3 Mix concrete) as per DSR 5.3 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete . Thermo-Mechanically Treated bars of grade Fe-500D or more. as per DSR 5.22.6 A Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, erraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. as per (DSR 22.7.1 ) Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. Providing & fixing of hold fast for chaukhats of doors and windows. as per DSR-10.31 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood as per DSR 9.1.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.(Note: Butt hinges and necessary screws shall be paid separately) 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters as per DSR 9.5.1.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing & fixing of Sliding door bolts (300x16mm) as per DSR 9.62.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing & fixing of tower bolts (250x10mm) as per DSR 9.63.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing & fixing of handle 125mm) as per DSR 9.66.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) as per DSR-13.4.2 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) as per DSR-13.4.2 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red 8.2.2.1 Area of slab upto 0.50 sqm as per DSR 8.2.2.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. as per DSR 11.38 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Painting with synthetic enamel paint of approved brand and anufacture of required colour to give an evenshade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per DSR 13.99.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Finishing walls with Acrylic Smooth exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm as per DSR 13.45.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Finishing with Emulsuion paint system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm as per DSR 13.48.1 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R. 13.80 as per DSR -13.80 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. as per DSR -4.17 Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. as per [DSR-12.22] Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Providing and fixing powder coated Aluminium patition/door/window/ventilator required as per engineer in charge. as per Analysis Complete in all respect as per Direction of Engineer in Charge. (Including labourcess but excluding GST)

Please Enable Macros to View BoQ information