Erosion protection of different reaches of Harherigaon under Sarupathar LAC from the erosion of river Doyang

Amount

Clearing Grass and Removal of Rubbish Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. (i) By Manual Means

Earthwork in bank trimming to the designed section /slope including removing the soils at a safe distance, complete as directed.

Supply of Geo-textile bags of type-A (size 1.03X0.70M), inner dimension made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre having thickness not less than 3.00 mm with minimum properties as (i) Tensile strength (CD) ≥ 24 KN/m (ii) Tensile strength (MD) ≥ 22 KN/m (iii) Mass ≥ 400.00 Gm/m ² (iv) CBR Puncture strength ≥ 4100 N/m2 (v) Elongation @ break (Warp) ≥ 54% (vi) Elongation @ break (Weft)≥ 52% (vii) Abrasion ≥ 70 % (viii) UV Resistance @ 500 hours ≥ 70% (ix) AOS ≤ 75 micron (x) Permittivity ≥ 1.25, (xi) Trapezoidal Tear Strength ≤ 520 N (xii) Permeability = 45Lt/m2/sec (xiii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHATI

Supply of Geo-textile bags of Type-B (Size 2.00m x 1.50m), inner dimension made of composite layers of geo-textile as per specifications below : Woven Geo-textile for the outer cover. The woven geo textile is woven with UV resistant slit film tape fibre with MAVR values of the following properties. Geo-textile used to manufacture geotextile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids.  Weight (ISO-9864/ASTMD 5261) ≥250 Gms/Sqm.  Tensile strength(MD) ( ASTMD 4595) ≥35 KN/m  Tensile strength(CD) ( ASTMD 4595) ≥35 KN/m  Tensile Elongation ( ASTMD 4595) ≥5% & ≤30%  Grab Elongation ( ASTMD 4632) ≥5% & ≤30%  Tensile strength ( ASTMD 4632) = 1.5 KN  UV resistance( ASTMD 4355) = 70%/500 hrs Non woven Geo-textile for the inner layer It is needle punched non woven geo-textile made of 100% polypropylene staple fibers which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis.  Weight (ISO-9864/ASTMD 5261) ≥300 Gms/Sqm.  Tensile strength(MD) ( ASTMD 4595) ≥12 KN/m  Tensile strength(CD) ( ASTMD 4595) ≥12 KN/m  Tensile Elongation ( ASTMD 4595) ≥5% & ≤30%  Grab Elongation ( ASTMD 4632) ≥5% & ≤30%  Tensile strength ( ASTMD 4632) = 1.5 KN  UV resistance( ASTMD 4355) = 70%/500 hrs (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).FOR GUWAHATI

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as (i) Tensile strength ≥ 12 KN/m (ii) Mass ≥ 300.00 Gm/m ² (iii) CBR Puncture strength ≥ 3.5 KN (iv) Elongation at break ≥ 60% (v) Abrasion ≥ 70 % (vi) UV Resistance @ 500 hours ≥ 70% (vii) AOS ≤ 75 micron (ix) Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤ 340 N (xi) Permeability = 2.00 x 10 ̄ ³ m/sec (xii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material) FOR GUWAHATI

Filling and laying of nonwoven Geo-textile bag of dimension 2.00mx1.50m including excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt, having minimum volume 0.612 cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost). with boat

Filling and laying in cage with sand filled Geo bags of size 1.03m X 0.70m including excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost) Without boat

Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with sand having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) without boat

Labour charge for laying Geo fabric sheet as filter bellow pitching including anchoring and complete as directed.

Construction and supply of Wire -netting box of size 1.50mx1.50mx0.45m made with mechanically woven, double twisted, hexagonal shaped wire mesh with wire made of low carbon, high ductile MS wire with heavy class of galvanization woth an additional layer of PVC coating with mesh type of 10x12 as per EN 10223 & ASTM A975, mesh wire of 2.70mm(I.D)/3.70mm(OD) tensile strength of 450-500/mm2, edge wire slevdge around it at least 2.5 times, lacing wire (zinc PVC coated ) of 2.20mm (I.D)/3.20mm(OD), VC coating thickness of 0.50mm nominal, 0.38 mm minimum and with average weight per unit being 12 kg with additional 3% of the weigth of box for lacing wire supplied seperately, supporting the facing of the box with zinc coated steel wire of required length as directed, compling with ASTM and Europian norms, including payment of all uties, sale tax any other taxes as applicable loading, unloading and stacking them at the site of work in measurable stacks, complete as directed.

Carriage of Geo Bags of size 2.00 x 1.50 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed..(Distance to be calculated with respect to FOR Guwahati)

Carriage of Geo Bags of size 1.03 x 0.70 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed.(Distance to be calculated with respect to FOR Guwahati)

Carriage of 300 gsm Geo sheet of including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed.(Distance to be calculated with respect to FOR Guwahati)

Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10m X 0.10mX 3.00m with M-40 grade of cement concrete with graded broken course aggregates up to 12mm size down and reinforced with 4 Nos. of 4 mm dia high tensile steel wire cable at four corners with necessary cover and 4mm high tensile stirrups at 250mm C/C, in conformity with IS-6403 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia at 50 cm inside from both ends in the same face and in either face of post another 2 Nos. of holes of size 16 mm dia at 65mm inside from both ends including properly curing for 14 (fourteen) days and carriage of porcupine members from factory to the stack yard within a distance up to 100 Km complete as directed.

Labour charge for launching of R.C.C. / PSC Porcupine including carriage of R.C.C./ PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching with boat.

Labour charge for launching of R.C.C. / PSC Porcupine including carriage of R.C.C./ PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching without boat.

Construction of temporrary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart driven at atleast 0.75 m below ground and height above plint 2.5m. Split Jatti bamboo wall mud plastering white washing 2 coats, 10 cm thick touch roofing over bamboo rua frame placing at 0.15 m clear apart fitted with bamboo kamies from binding doors and windows with Bamboo Chattai strengthening with Bamboo frame binding with wire etc compple as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon) i/c payment of taxes.

Excavation in Ordinary Soil (i) Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 (Manual method should be adopted where machines can not be deployed due to site condition

RCC Guard Post: Supplying, fitting and fixing RCC guard post 150cm long erected 75cm above the ground and 75cm below the ground with M-15 grade (nominal mix 1:2:4 with broken stone aggregate up to 20mm size) of cement concrete and required reinforcement tied in position with annealed black wire including centering, moulding the top, curing including painting concrete surfaces in 23cm strips upto 0.75m from the top alternately in black and white and having 2 nos. reflective band of desired shade etc. complete as per design and as directed. (b) 15 cm dia. RCC guard post with reinforcement of 4nos. 12mm dia TMT main steel bars and 6mm TMT/ MS stirrups at 15cm c/c