Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.3 Laccepted-aoc | ₹3.3 L | accepted-aoc |
Tender Value
₹5 L
EMD Value
₹12,500
Closing Date
26 Dec 2025, 10:00 pmClosed
Directorate of Municipal Administration
Syed Malik
Borewell drilling, cistern construction and pipeline work in Ward No. 28 and 29 of Raichur city
DMA/2025-26/WS/WORK_INDENT52820
DMA/2025-26/WS/WORK_INDENT52820
Open
Water supply/sewage lines
Electronic Documents, First(One Cover)
DMA City Corporation Raichur
5 documents required · 5 mandatory
₹500
₹12,500
26 Dec 2025
16 Dec 2025
24 Dec 2025
Borewell drilling, cistern construction and pipeline work in Ward No. 28 and 29 of Raichur city
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P W S by vertical electrical sounding by adopting Venner or S...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m Fixing of casing pipes collars and cap w...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m Fixing of casing pipes collars and cap w...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG above 1100 CMF above in all strata including over burdern upto 20 m Fixing of casing pipes collars and cap w...
PVC pipes of 6 Kg cm2 for 160mm
PVC pipes of 6 Kg cm2 for 110mm
Polythylene pipes high density (HDPE) 40mm external dia (PRE WS DSR, Klb for 2019-20 P.No. 26 I.No. 0304)
Providing, Single Phase Submersible Pump Sets of 100mm dia 4 inch suitable for bore well confirming to IS 8034 2000 specifications to work site with testing of as per instructions of engineer incharge...
Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples, SS Studs & Nuts, Screw Clips & water proof Insulation Tape etc complete with ISI mark (PWD UGD and water supply...
Labour charges for Erection Electrification and commissioning of Pump sets including aligning and balancing of all items including supply and erection of two pair of supporting clamps bore well caps c...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core sheathed of nominal cross sectional area as per IS 694 1990 with ISI Mark and as per its latest amendments 1 3 6 Sqm
Supply and delivery at site brand new best make pressure guage suitable for centrifugal pump confirming to latest IS standards. pressure guage 80MM
Supply and delivery at site of brand new best make non return valve as per IS 778 1984 with ISI Mark and as per its latest amendments SIZE 50MM
Supply installing testing and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No Analog Ammeter 1 No Analog Vol...
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc comple...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834 1986 with latest amendments with KPTCL authorities and erection electrification and commissioning of the same at th...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter
Labour charges for providing connection using insulated sheathed steel wire cable as per IS 1554 1988 with latest amendments from KPTCL pole to meter board unit with all necessary materials tools and ...
Merer connection charges As per RR NO and Vouchers
Earthing Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit The pits should be filled up with equal proportion of salt...
Providing Laying and Fixing of GI pipes conforming to IS 1239 1990 with latest amendments complete with GI fittings excluding the cost of fittings with cuts and threads wherever necessary includin...
Providing and fixing C P brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1.doc
Tender Document • 3.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .