Upgradation of Internal Roads by Laying M 30 Grade Cement Concrete Road between Godown 1 and 2 and Godown 2 and 3 at CW, Jhunjhunu.

Sub schedule A. (I)

Name of work: Upgradation of Internal Roads by Laying M-30 Grade Cement Concrete Road between Godown 1 & 2 and Godown 2 & 3 at CW, Jhunjhunu

1 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required : water bound macadam 348.88 cum 3078.05 16.13.2

2 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth away from CWC Campus in all lead and lift, as directed by Engineer-incharge. All kinds of soil 418.65 cum 177.5 2.6.1

3 Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of Engineer-in- charge cum 16.8

4 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge: with material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 418.65 cum 2784 16.78.1

5 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres 2791 sqm 218.9 16.1

6 Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer- in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. 698.78 cum 10529.35 7357699.193 16.43.1

7 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. cum 2914.3 203330.71099999995 16.79

8 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 6187.5 per cm depth per m width per metre length 5.3

9 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. 3775 per cm depth per m width per metre length 8.65 16.46.1

10 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.: Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 107.85 153919.20599999998 5.22.6

11 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 96.03 cum 2434.25 15.2.1

12 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum 263.95 15.6

13 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 42.93 cum 8340.85 4.1.2

NOTE: ALL ABOVE RATES SHALL BE MULTIPLIED BY CORRECTION FACTOR OF 0.973, AS PER CPWD CIRCULAR NO.158/SE (TAS)/GST/2024/02-E DT.08-08-2024

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Sub schedule A. (1): Items based on DSR 2023 and Non-Scheduled Items for civil works

NIT Number E NIT_CWC/RO-JAI/ENGG/2025-26/01

Name of Work Upgradation of Internal Roads by Laying M-30 Grade Cement Concrete Road between Godown 1 & 2 and Godown 2 & 3 at CW, Jhunjhunu

NAME OF CONTRACTOR

Sr.No. Description of Work Total Amount (In Rs.) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Price Bid (Summary Sheet)

NIT Number E NIT_CWC/RO-JAI/ENGG/2025-26/01

Name Of Work Upgradation of Internal Roads by Laying M-30 Grade Cement Concrete Road between Godown 1 & 2 and Godown 2 & 3 at CW, Jhunjhunu

NAME OF CONTRACTOR

Sl. No. Description Items of works Quoted Amount (Rs.)

0_);\(0\) Total of Sub schedule A (I) Items mentioned at Sub Schedule ‘A (I)’

0_);\(0\) Total of all Sub Schedules A(I) {In Figures}

3 Amount Quoted (In Words) Total of all Sub Schedules A(I) {In Words}

Pre-Qualifying (PQ) Proforma: Bidder Information Summary

{To be Filled by Bidder in sheet uploaded over portal and then to be submitted along with technical bid}

Name of Work: Upgradation of Internal Roads by Laying M-30 Grade Cement Concrete Road between Godown 1 & 2 and Godown 2 & 3 at CW, Jhunjhunu.

NIT Reference Number: E NIT_CWC/RO-JAI/ENGG/2025-26/01

SL Description Details (filled by Bidder)

General Details of Bidder

See PQC S/n (1) to (4): Appendix-II of NIT

1 Name of the Bidder

1.1 Bidder Address, (registered)

1.2 Bidder Organization ID /CIN in case of Company

1.3 Bidder Telephone number

1.4 Bidder E-mail address

2 Type of Bidder constituent (Organization)

(JV not allowed where estimated cost of work put on Tender is up to Rs. 30 cr)

2.1 Attested copy of documents in support of Bidder Organization Type

(See ITB-Appendix IV clause number 3.2: 1 (b): Organization Details and

Appendix-II of NIT: List of documents required in support of Bidder Legal Entity.

2.2 Current List of Directors/Partners: as applicable

3 Name of the person holding the power of attorney for this Bid

3.1 Designation

3.2 Contact details of person holding the power of attorney

3.3 Attested Copy of Power of Attorney to sign & submit the Tender (as per format given in EXHIBIT-III of Appendix-II)

4 Earnest Money Deposit (EMD) of Amount as mentioned in APPENDIX-1 (TIS) to be paid through NEFT/RTGS in the bank account of CWC, and EMD submission proof is to be submitted. The bank details for submitting the EMD are: - Name of Account Holder - CENTRAL WAREHOUSING CORPORATION , Bank Name – HDFC BANK, Branch Name – HAUZ KHAS NEW DELHI, Account No.- 50100393023873, IFSC – HDFC0000467, MICR - 110240071

5.1 PF Registration code number of Bidder

5.2 COPY of PF Registration number of Bidder

6.1 GST Registration code number of Bidder

6.2 COPY of GST Registration number of Bidder

7.1 PAN of the Bidder

7.2 COPY of PAN of Bidder

8.1 Whether Enlisted /Empaneled with CPWD/ MES/ Railway/ PWD/ CWC/any other PSU etc. if any,

8.2 Copy of Enlistment/Empanelment certificate Submitted or Not

9 Whether Bidder is executing or completed any work awarded by CENTRAL WAREHOUSING CORPORATION in Past Three FY Year (FY 2022-23, FY 2023-24 & FY 2024-25) and Current FY 2025-26.

10.1 Affidavit along with this PQ Performa (EXHIBIT-I) on NJS paper signed and submitted after filling necessary details.

10.2 Declaration of near relatives (EXHIBIT-IV) submitted.

Technical Eligibility Criteria:

See PQC S/n (5) in Appendix-II of NIT for details & qualifying limits.

11 Particular Technical Experience w.r.t. Similar Nature of Work:

11.1 Brief of Similar Nature Work Experience-1

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.2 Brief of Similar Nature Work Experience-2

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

11.3 Brief of Similar Nature Work Experience-3

I Work order/ contract agreement ref number and date

Ii Name of client issued the work order and completion certificate

iii Completion certificate -ref number and date

iv Total value of work completed (Rs.)

V Stipulated date of completion

vi Actual date of completion

vii If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

viii Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

See PQC S/n (6) in Appendix-II of NIT for details & qualifying limits.

Information on Financial Capabilities & Turn over

12.1 Annual Financial Turnover-Total Revenue (Income) (as per CA certificate and audited P&L Account)

Iii FY 2022 –23

Vi FY 2019-20 (only when audited turnover for FY 2024-25 is not available)

12.2 The average of financial turnover for the last three financial years i.e. FY 2024-25, FY 2023-24 and FY 2022-23 Or FY 2021-22 (FY 2021-22 to be referred only when Audited turnover of FY 2024-25 is not available)

IMPORTANT NOTES:

1. Tenderers have to fill complete details in Pre-Qualifying Performa (Bidder Information Summary) in sheet uploaded over tender portal.

2. Documents pertaining to the above details should be scanned and uploaded on e-tendering website at the time of on-line tender submission.

3. RTGS/NEFT E-payment Challans with UTR no. duly authenticated by Bank may also be scanned & uploaded along with tender submission.

4. Bidder must refer Tender Information Summary (TIS) in APPENDIX-I, PRE QUALIFICATION CRITERIA (PQC) in (APPENDIX-II) and Tender eligibility criteria as per ITB clause 3 (APPENDIX-IV) appended with NIT before filling this PQ Performa and Affidavit.

5. The PQ Performa EXHIBIT-I along with Its Annexure (Affidavit) enclosed with this Performa is mandatory and must be submitted by the Bidder.