CERTAIN SANCTIONED WORKS UNDER GE (WEST) JABALPUR

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft / Loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep in Soft / Loose soil, for foundations, etc. complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for moorum filling under floors or pavings, laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed.

Supply only liquid water proofing compound

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M & L for RCC 1:2:4, Type B-1, nominal mix, using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M & L for RCC 1:2:4, Type B-1, nominal mix, using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns, landings, shelves and the like complete all as specified and as directed.

M & L for RCC 1:2:4, Type B-1, nominal mix, using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

M & L for RCC 1:2:4, Type B-1, nominal mix, using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

M & L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M & L for brick work in half brick thick walls using fly ash bricks, straight or curved on plan to any radius built in Cement Mortar 1:4 complete all as specified and as directed.

Use and waste of form work to sides of concrete foundation, footings, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter; for rough finished surfaces complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.

Use and waste of form work to sides and soffits of lintels, beams, brackets and similar works for fair finished surfaces of concrete complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed.

M & L for Aluminium anodised window and ventilator shutters including frames, top hung type type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium anodised fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1 no.), complete all as specified and directed.

M & L for mild steel work confirming to Fe - 410 - O or Fe - 310 - O, framed work such as grills, gratings, framed guard bars, ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, ladders, framed balusters etc complete all as specified and as directed.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming

Mild steel TMT bars 5 mm and over upto and including 10 mm dia in stirrups,spaces and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base flooring complete all as specified and directed

M&L for 25 mm thick cement concret Type B-1 1:2:4 (Using 20mm graded aggregate ) as in sub base flooring complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm, 450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in waterproof epoxy tile grout of approved make /colour to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) are of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm and jointed and pointed in waterproof tile grout of approved make/colour in near cement slurry and in coloured cement to match colour of tile with and including cement plaster backing coat 1:4 CM 15mm thick fished rough to fix tiles complete all as specified and directed.

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps, jambs, pilllars, window cill, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction joint of 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

S&F cement concrete chequred tiles of size 250 x250 x22mm thick machine cut pressed set, jointed and pointed in neat cement slurry with grey cement and pigments as in floors and cut and polished complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base flooring complete all as specified and directed

M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified. (Note:- WPC measured and paid saperately)

M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over and including 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed.

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as as specified and as directed.

S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified and directed.

S & F GI water tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

S & F GI water tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

S & F GI water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

S& F Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S& F 15 mm bore two way bib tap cast copper alloy, chromium plated, with attached hand faucet long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.

S&F 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and directed.

S& F Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed.

S&F CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flange end bedded in red led cement and other in fixed all as specified and directed.

S&F vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed.

S&F 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed.

S & F Vitreous china urinal half stall type, white including connection to flushing pipe and outgoing pipe complete all as specified and directed.

S & F urinal spreader chromium plated connection to flushing pipe and outgoing pipe complete all as specified and directed.

S & F Soap dish, stainless steel approx size 160mm x 160mm x 90mm complete all as specified and directed.

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

S&F PVC connection 600 mm long, 15mm size with PTMT nuts complete all as specified

S&F grating doom 100mm dia PTMT (Min weight 25 grms)

S & F Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.

S&F 20 mm dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and directed

S&F PVC (SWR) gully trap 125 x 110 mm setting and jointing with solvent cement complete all as specified

S & F stack clamps out of 50 mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc all as specified.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs-

(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.

(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.

(c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame.

(e) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm.

S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S& F 1000 ltrs rotational moulded polythine water storage tanks( cylinder vertical with closed top) hoisted and fixed in position including 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe all as specified in complete all as specified.

Providing and fixing CP brass overhead shower dia 105mm dia and with 15mm cp brass shower arm 190 mm long flat shape for wall mounted shower with flange completed all as specified and directed.

S & F septic tank (LLDPE) of 2000 litrs suitable for 25 user with connection to soakge pipe , air vent pipe and flexible in and out pipe with pall ring media including manhole cover including all necessary fiting and fixture required for complete sucssesful running of septic tank completed all as specified and directed by engineer in charge .(make - sintex , supreme or eqvivalent)

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Excavation over areas not exceeding 1.50 m in depth and getting out in any type soil complete all as specified and as directed.

Excavating over areas, exc 1.5 m deep and n exc 3 m getting out in any type of soil complete all as specified and as directed.

M & L solid wall DWCP socketed drain pipes class SN-8, conforming to IS 16098 (Part-2) with 150 mm bore dia in 6m length including laying, jointing to pipe complete all as specified and as directed

S & F Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:6 complete all as specified and directed.

M & L of broken bricks Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M & L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces not exceeding 10cm width or girth including preparation of surfaces complete all as specified and as directed.

S & F GI water tubing of 40 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.

S & F Vitreous china wash down water closet [Pedestal pattern], white [excluding flushing cistern and flush pipe] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.

M & L for 8mm thick 900mm x 450mm curved frosted urinal partition glass complete fixed with CP clips fixed to wall including all necessary fixtures and fittings and fitting to hang the glass complete all as specified and directed.

Excavation in post holes each not exceeding 0.5 Cu.m, getting out in Soft / Loose soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

M & L for PCC 1:2:4, Type B-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde fe 410-W or E 250 (quality A) complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E250 quality A complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L mild steel sheet 1.25mm thick and 150mm dia eaves gutter, galvanised class 3, half round with rounded edges fixed with self tapping screws complete all as specified and as directed.

M&L for stop ends 1.25mm thick and 150mm dia (for spigot or socket ends) provided at ends of size suitable to fix with 150mm dia sheet with complete all connection required to make it workable all as specified and as directed.

M&L for UPVC pipe (SCH-80) down take pipe for rainwater of 100mm complete all as specified and as directed.

S & F MS machine made screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square not exceeding 5 cm and n exceeding 10 cm long, dia of 5 to 10mm complete all as specified and as directed.

S & F MS machine made screw bolts with hexagonal or square head one end and screwed other or screwed both ends, fitted with washers and one hexagonal or square exceeding 10 cm and not exceeding 15 cm long, dia of 11 to 15mm complete all as specified and as directed.

S&F plates (plain or chequered) channels, square out or notched (ordinary or counter sunk) forming holes without any attachment Fe-290 (Gde E-165) complete all as specified and directed.

S & F Falt Iron 40 X 6 mm confirming to Fe - 410 - O or Fe - 310 - O as in wind ties fixed with necessary bolts etc drilling holes etc complete all as specified and as directed.

M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Roof kerbs, Coving etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for hardcore of gauge exceeding 63 mm and not exceeding 100mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for 50mm sand cushioning under floors complete all as specfied and directed.

M & L Machine pressed coloured precast concrete rubbber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and as directed..

M & L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying three coats of white washing complete all as specified and as directed.

Removal of excavated material [Soil] to a distance exceeding 250 m and not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Bed blocks, Bed plates and coping including weathering, slightly rounded or chamfered angles and throating, necessary form work etc complete all as specified and directed.

Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] complete all as specified and as directed.

M&L for 25 mm thick cement concret Type B-1 1:2:4 (Using 20 mm graded aggregate ) as in floor finishes even and smooth without unsing extra cement complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Non skid joint free tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed..

All as described in serial item No. 14, but as in skirting over and including rendering 10mm thick in CM 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Preparing Newly Plastered Surfaces of extrior wall and applying Two coats Cement base paint , Alkali & fungal resistance, dirt resistance extrior paint of required shade (Company Depot Tinted) with including priming coat of exterior primer applied complete all as specified and as directed.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of extrior walls and applying two coats of cement base paint on walls over a coat of primer complete all as specified and as directed

Supply only integral Water proofing compound

M&L for Preparing Newly Plastered Surfaces of internal wall and applying Two coats of oil bound emulsion, Alkali & fungal resistance, dirt resistance interior paint of required shade (Company Depot Tinted) over a coat of interior primer over and including 2 mm thick wall putty complete all as specified and as directed.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces including preparation of old undecorated surface of walls and applying two coats of oil bound emulsion on walls over a coat of primer over and including 2 mm thick putty complete all as specified and as directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as described in serial item No. 25 above, item but except bricks.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes,bends, swan necks etc. complete all as specified and as directed. Note : Measurement shall be of overall as fixed along the centre line over fittings and accessories.

S&F 75 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm Each complete all as specified and as directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each complete all as specified and as directed.

M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and hold fast including necessary framework complete all as specified and as directed.

M&L for pressed steel door frame 125mmx60 mm and 1.25mm thick including necessary fixing lugs hings, lock strick plates, etc complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for door etc complete all as specified and as directed.

S&F factory made 35mm thick plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS-1003 (Part-I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and as directed.

S&F for Mild steel sliding door bolts 300mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150 mm long complete including necessary welding if fixed in steel door complete all as specified and as directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 4Omm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber, gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manfacturer's catalogue and specifications complete all as specified and as directed. Notes: (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item. (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of apeture 1.40 mm fixed with aluminium wire staples. (iii) Glass filling in panels of glazed shutter shall be 4mm thick tinted sheet glass of approved make and shade /tint (Make of aluminium sections powder coated :Jindal or equivalent of JINDAL

S&F in repairs 18mm rigid prelaminated coloured solid PVC sheet suitably fixed in MS angle frame work as in cup board, Cabinate Drawer etc as per manufacturer specification and drawings complete all as specified and directed. Note :- Mild steel frame work shall be measured and paid sepratly.

S&F for 30 mm wide Steel Continous (piano) hinge, steel bright finish or electro galvanised etc complete all as specified and as direcated

S&F 150 mm size brass handles, cast type, polished bright complete all as specified and directed.

S&F magnetic stopper suitable for cupboard, dressing table fixed with screws Complete all as specified and directed.

M& L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished Complete all as specified and directed.

M & L for two coats of synthetic enamel paint old steel surfaces any description over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for Preparation of new wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repairs Stainless steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour including end globe as approved complete including side mounting complete all as specified and directed.

S&F Stainless steel Bracket with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

S &F Door Seal rubber etc, complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

All as per above item but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed.

Taking down or up steel tubing and connections for 15 mm bore of pipe complete all as specified and as directed.

Taking down or up steel tubing and connections for 20 mm bore of pipe complete all as specified and as directed.

Supply and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 16mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

Supply and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.

S&F in repairs chronium plated mixer for wash hand basin for mixing hot and Cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed.

Providing and fxing CP brass Wall Mixer with provision for over head shower with 115mm long bend pipe on upper side connecting legs and wall flange etc complete all as specified and directed.

Demolition of 150mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and as directed.

M &L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reguired for 100mm bore complete all as specified and as directed.

M&L for 40 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed.

Providing and fixing water closet squatting pan (Indian type W.C. pan 585x445x260mm pan ) with L bend and extension make of Jaquar cat no. ECS-WHT-451 or Hindwarecat No. 20076 with 100mm sand cast iron P or S- trap, and 7.2 litre Smart single flush wall hung cistern with installation kit make of Jaquar WHC-WHT-184NL or Hindware cat No. 21001 with all fittings and fixures complete including cutting and making good the wall and floors wherever required complete as directed by Engineer-in-Charge.

Providing and fixing white vitreous china Couple Water closet Make of Jaquar cat no. CNS-WHT-755S220SPP and CNS-WHT-207 or Kohler cat no. K-8753T and K-8753T-S or Grohe cat No. 39 119 001 with PP soft closing seat cover, Hinges, fixing Accessories set, Connection pipe with painting complete including cutting and making good the walls where required complete as directed by Engineer-in-Charge.

S & F PVC cabinate with mirror of size 400x500 etc complete all as specified and directed.

Providing and applying two coats of Brushbond-acrylic polymer modifed cementtations water proof coating after cary out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface, etc pre dampning of concrete surface, mixing all components of Brush bond using heavy duty slow speed drill fitted with mixing paddle followd by application of two coats using a suitable brush as per manufacturer's instructions.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed.

S&F three layered Rotational moulded polyethylene water storage tanks of capacity 500 ltrs(cylindrical vertical with closed top) hoisted and fixed in position including cover complete all as specified and as directed.

M&L for machine cut cudappa stone slab 20 to 25 mm thick over and including cement screed bed 15mm thick in CM 1:6 in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed.

M&L for DWCPE (SN-8) pipe with 180 (OD) /163 (ID) mm diameter pipe laid in trenches including ramming and compacting base of pipe including jointing pipe and connecting to manhole etc complete include all item and activites to excecute and make sewer line functional complete all as specifed and as directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and as directed.

S&F in repair brass CP fancy type 15mm bore pillar cock with 450mm long Braided hose complete all as specified and as directed.

S&F in repairs Providing and fixing C.P. brass Over head Shower Dia 105mm of Jaquar cat no. OHS-1709 or Kohler cat no. K-16356IN-CP or Grohe cat no. 26 267 000 etc Complete as per direction of Engineer-in-charge (Cantractor Shall be Provide 10 year Warratee certificat and MTC of each item) complete all as specified and as directed.

Providing and fixing in repair CP brass Wall Mixer with provision for over head shower with 115mm long bend pipe on upper side Connecting legs and wall flange Make of Jaquar cat no. OPP-CHR -15115PM or Hindware cat no. F360019 etc complete as per direction Engineer-in-Charge (Contractor Shall Provide 10 year Warranteecertificate and Manufacturer's Test Certificate including copy of invoice of each item) complete all as specified and as directed.

S&F in Repairs Providing and fixing 15mm C.P. brass angular stop cock with wall flage make of Jaquar cat no OPP-15053PM or Grohe cat no. 26 021 000 or Kohler cat no. K-37317IN-4A-CP With wall flange etc complete for mixer and geyser points as directed by Engineer-in-charge (Contractor Shall Provide 10 year Warrantee certificate and Manufacturer's Test Certificate including copy of invoice of each item) complete all as specified and as directed.

S & F single Towel rail 600 stainless steel fixed to wall with chromium plated (CP) brass screws complete all as specified and as directed.

S&F suspended prepainted false ceiling, self design, self texture, using chicago metalic (E grid) exposed suspended system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimensions 39mm x 24mmx 08mm thick (thickness comprising of GI /0.4+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length) cross tee of dimensions 29mm x 24mm 0.8mm thick and thick wall angle 22.2 mm x 22.2mmx 0.65mm thick (thickness comprising of GI /0.35+PPPCGS/0.3mm & weight of angle 0.70 Kg for 3050mm lenght) with and including 4mm thick HPSC (high pressure steam cured) pre-primed, self embossed, texture designer board, water resistant termitant, fire resistant for insulation and acoustic purpose to be placed in the grid systemduly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (wt - 0.007 Kg/clip) hold down clips (wt-0.0035 Kg/clip) with provn of light fixture complete all as specified and as directed.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One light point controlled by one switch.

( b) One fan point/ex fan controlled by one switch.

(c) One socket point controlled by one switch on same board.

M&L for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and as directed by Engineer in charge.

M&L for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and as directed by Engineer in charge

M&L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and as directed by Engineer in charge

Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and as directed.

S&F for Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and as directed by Engineer in charge.

S&F for MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and as directed by Engineer in charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2 core 16 Sqmm complete all as specified and as directed.

Supply and Laying DWC pipe 38 mm ID 63 m OD for cable protection with all accessories complete all as specified and as directed.

upadhyay Builders (BID ID -3513289)

G.S.CONSTRUCTIONS (BID ID -3513197)

kamakshi construction (BID ID -3519517)

M/s Om Infracon (BID ID -3517877)

NEERAJ DUBEY (BID ID -3519290)