AS/NH-15/Tez/OTI/BCT/25-26/1

Amount

Scarifying existing bituminous surface to a depth of 50 mm by mechanical means (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 metres.

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sb-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density ( including carriage up to initial lead of 5.0 km from quarry and carriage of mixed materials up to 10.0 Km initial lead from mixing plant)

Prime Coat (A) Providing and applying prime coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg per sqm using mechanical means (including cost of testing of materials at site and laboratory as directed by the deptt.) (ii) With Bitumen emulsion CSS-1(IS-8887-2004)

Tack Coat Providing and applying tack coat with bitumen emulsion using emulsion at the rate of 0.20 kg per sqm on the prepared bituminous cleaned with mechanical broom (III) With Bitumen emulsion CRS-1 (b) Dry and Hungry Bituminous Surface

Dense Graded Bituminous macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP using crushed aggregates of specified grading, premised with bituminous binder @ 4.0 to 4.5 % by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic payer finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 507 complete in all respects) (a) With hydrated lime/cement as filler ( refer table 500-9 of MoRT&H specification) (I)'with 60/70 or VG-30 grade bitumen (ii) for GradingII(19 mm nominal size)

Bituminous Concrete Providing and laying bituminous concrete with 100-120 TPH batchType hot mix plant using crushed aggregates of specified grading. Premixed withbituminous binder@ 5.4 to 5.6% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth w heeled, vibratory and tandem rollers to achive the desired compaction as per MORT&H specification clause No. 509 complete in all respects) '(a) With hydrated lime/cement as filler (refer table 500-9 of MoRT&H specification) (I)'with 60/70 or VG-30 grade bitumen (ii) for Grading-II (13 mm nominal size)

Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 min x 6 mm firmly fixed to the ground by means of properly designed foundation with MIS grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level i) 90 cm equilateral triangle

Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 min x 6 mm firmly fixed to the ground by means of properly designed foundation with MIS grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level iii) 60 cm circular

Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 min x 6 mm firmly fixed to the ground by means of properly designed foundation with MIS grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level (iv) 80 cm x 60 cm rectangular

Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 min x 6 mm firmly fixed to the ground by means of properly designed foundation with MIS grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level (vii) 90 cm high octagon

Hazard Marker Aluminium backed Flexible Prismatic Sheeting (AFP) Supplying, fitting, fixing of yellow colored alumnium backed flexible prismatic retroreflective sheeting of 1ft width with screen pointed arrow/slant line pattern in black and a continous roll format , laminated at the back with a 50micron Aluminium (AL) foil with pressure sensitive adhessive and liner and the flexibility, retro-reflectivity and other relevant properties conforming to Type-VI as ASTM D495609 for rebound devices. Above sheeting shall be flexible and conformable enough to be directly applicable on rough concrete, wood or masanory surface with a high peformance contact adhessive. The edges of above sheeting shall be sealed on all four sides after application with a two part epoxy based structural adhessive and shall be extremely resistant to peel off.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250| gms per sqm area, thickness of 2.5 mm is exclusive of| surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes and conforming to the MoRT&H specifications

Providing sparkle solar road studs providing sparkle solar road studs manufactured by tat B.P solar India Ltd. of size (125mm*125mm), 90 mm height (from buttom of shank to the top stud) with detachable battery, m6LED-three on each side for BI-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per studs 700+25 grms, flash rate of 50-65 times pere minute completely water resistant and weather proof with replacement warranty and free maintenance for one year from the date of installation of syud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician) (b) bi-directional

Construction of Median and Island with Soil Taken from Borrow Areas (Construction of median and Island above road level with approved material brought from borrow pits spread, sloped and compacted as per clause 407)

Plain/ reinforced cement concrete in open foundation complete as per drawing and technical specification including steel shuttering framework (N) Without Plasticiser (i) PCC Grade M-15

Plain/ reinforced cement concrete in open foundation complete as per drawing and technical specification including steel shuttering framework (N) Without Plasticiser (i) PCC Grade M-20

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface

Providing and erecting street light mounted on a steel circular hollow pole of standard specifications for street lighting

Maintenance of Earthen Shoulder (Filling with fresh soil)

RAJU CHANDRA BASUMATARY (BID ID -3284394)

SMB CONSTRUCTION (BID ID -3284658)