SPL REPAIR REPLACEMENT OF EXISTING BIRD PROOFING SYSTEM IN BLDG NO TA 269 LIGHTNING CONDUCTOR IN BLDG NO P 83 TA284 TA 285 AND BLDG NO TA 270 INCL PANELING CEILING AND REWIRING OF 666 ARMY AVN SQN R AND O AND CERTAIN MINOR WORKS UNDER GE 865 EWS

Amount

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.

Dismantling wrought iron or mild steel work of any description not otherwise for complete all as spcecified and as directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, incluidng bending and swlding angles as necessary gusset plates riveting etc n exc 10 kg each cracket conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F hangers 6mm dia GI upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mmm long and expansion hold fasterners 12.5 mm dia 40 mm long complete all as specified and as directed by Engr-in-Charge.

S&F PUF (poly urethene foam) panel board 40mm thick having density 40 Kg/Cum, filled in between two pre-painted galvanised iron (PPGI) sheet 1 mm thick, border covered with insitu pasted PPGI strips of width equal to thickness of board and fixed with screws to angle iron grid at a roof level 9 to 10 mtr from floor complete all as specified and as directed.

M&L for 2nd class softwood clean sawn plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads exceeding 13 Sqcm and n.exc 25 Sqcm in section as in framed work complete all as specified and directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed

M&L for 2nd class soft wood clean swan as in beeding for edges of ceiling, lining or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section complete all as specified and as directed.

9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in wall paneling, shelves, boarding complete all as specified and as directed by Engr-in-Charge. MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

All as per item No 11.00 above, but on ceiling complete all as specified and as directed MAKE: NOVA PAN/GREEN PLY BHUTAN BOARD/MYSORE WOOD BOARD/CENTURY PLYWOOD

S&F in replacement Air terminal single pointed aluminum rod 12mm dia and 300mm long all as specified and as directed.

S&F in replacement Aluminium strip 25 x 3.15mm with porcelain insulators, saddles and fixing screws etc. for roof conductors and down conductors all as specified and as directed by Engr-in-Charge.

Material & labour for Earthing using galvanised iron earth plate electrode of size 60cm X 60cm X 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip of size 32x6mm by means of bolts, nuts, check nuts and washers made of GI and provision of GI pipe light grade 40 mm dia for protection of earthing lead and 20mm dia GI medium grade pipe for watering arrangement including funnel, wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 3 of SSR Part-I 2009 including taking out of old u/s earthing set complete all as specified and directed.

Material & labour for Earthing using galvanised iron earth plate electrode of size 60cm X 60cm X 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised wire of size 4 mm dia by means of bolts, nuts, check nuts and washers made of GI and provision of GI pipe light grade 15 mm dia for protection of earthing lead and 20mm dia GI medium grade pipe for watering arrangement including funnel, wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 3 of SSR Part-I 2009 including taking out of old u/s earthing set complete all as specified and directed.

Material & labour for Earthing using galvanised iron earth plate electrode of size 60cm X 60cm X 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip of size 25x4mm by means of bolts, nuts, check nuts and washers made of GI and provision of GI pipe medium grade 40 mm dia for protection of earthing lead and 20mm dia GI light grade pipe for watering arrangement including funnel, wire mesh, CI pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No 3 of SSR Part-I 2009 including taking out of old u/s earthing set complete all as specified and directed.

S&F in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw

S&F in replacement Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of25x4mm galvanised iron strip all as specified and as directed by Engr-in-Charge

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

Material and labour for point wring complete with stranded copper conductor 1100 V grade cable 2.5 sqmm FRLS with colour coding (Nominal area) PVC insulated (unsheathed) in and including PVC Cassing Capping not less than 20 mm width with sunk in pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with stove enameled black paint with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washers with all assessories including 2.5 sqmm stranded copper conductor cable PVC insulated FRLS in green colour as earth wire connected to common earth dolly complete all as specified and directed Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per item No 20.00, here in before but for 5 Amp 3 pin socket on same board.

All as per item No 20.00, here in before but for 5 Amp 3 pin socket on inedependent board.

All as per item No 20.00, here in before but for 15 Amp 3 pin socket on inedependent board .

M & L for point wiring with 4 sq mm PVC insulated FRLS, unsheathed single core stranded copper conductor 1100 Volt grade in PVC caping cassing on wall /floor etc with all accessories of suitable size MS/Pressed steel terminal boxes 1.6 mm thk with bakelite sheet cover (hylum) 3mm thick /PVC Gang box for mounting switch, socket, Cup washers complete with all accessories for one 6 pin 15 Amp socket outlet point on independent board including 4 sqmm PVC insulated copper conductor in green colour common earth and connecting to earth dolly all as specified. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

S&F of switch piano flush button single pole one way 5 Amp, 240 Volts complete all as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F of switch socket outlet, 2 in 1,3 Pin, 5 Amp 240 volt flush type Complete all as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F of ination piano flush button single pole one way 5in 1 ,5/16 Amp, 240 Volts complete all as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F of socket outlet 3 pin & 2 pin 5 Amp flush type. Make : Anchor/Legrand/Crabtree/Cona

S&F of ceiling rose, surface Bakelite three terminals including taking down old one. complete all as directed. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of Uniquely clean & simple lighting system offering continuous, uniform lines of light across ceilings. The aluminium extruded suspended LED light 25 watt, 230 volts, 50Hz to gives continuous lines of light distribution with the possibility of various shapes (suspension system included) complete with all accessories internaly prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete. Make : Cat Part No. DESTELLO50LP/S25WLED857SPMMAWH of Havells or equivalent in Crompton/Philips/Bajaj

S&F in replacement of Energy saving, environmental friendly, long life, LED light 70 watt, exclusive innovative die-cast aluminium IP66 flood light suitable for highlighting architectural facade and general purpose lighting including connecting up with twin core twisted flexible copper conductor cable of suitable size complete. Make : Cat Part No. JETAPROFL70WLED757LTG of Havells or equivalent in Crompton/Philips/Bajaj

Supply, fixing, connecting and testing in replacement of Bldg Security light LED type suitable for working on 230 volts, 50 Hz, AC of 60 Watts complete all as specified. Make : Cat Part No.ENDURAPEARLNEOSL60WLED757PASYTOPC of Havells or equivalent in Crompton/Philips/Bajaj

S&F in replacement of GI Bracket made out of 50mm dia medium grade pipe 1.2m length to shap for fixing on Wall and suitable for 48 Watt strret light with 02 Nos clamps of flat iron (40 x4mm) nuts, bolts and washers including painting with two coats of aluminim paint overcoat of primer. Make : TATA/JINDAL/BST/Prakash Surya

Sub main wiring with two runs of 4 Sqmm (2x4 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 4 Sqmm (1x4 sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 4 Sqmm (2x4sqmm), one run of 4 Sqmm (1x4 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 6 Sqmm (2x6 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x6 sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6sqmm), one run of 6Sqmm (1x6sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Supply and fixing in replacement MCB distribution board double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc complete all as specified and directed. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, sheet metal box, SPN, Regal Gray, 4Way double door 240Volt 50Hz with complete accessories, concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 5076 10 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

S&F in replaceent of 4 pole vertical load line distribution board suitable for up to 160 Amps MCCB as incommers and MCB as outgoing,4 way, prewired,415 volts, 50 Hz, double door complete all as specified and as directed by Engr -in-Charge. Make : Cat Part No.DCDLVDCBGSTE04 of Havells or equivalent in ABB/L&T/Legrand

Supply and fixing MCCB 4 pole 125 Amps, 16 KA, 415 Volt complete incl taking down of old MCCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4200 16 of Legrand (DPX³) or equal approved in Schneider (NSX)/Siemens (3VL2)/L&T (D-Shine)

Supply and fixing MCB SP 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 6 to 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 09 to 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

M&L for GI pipe (light grade) with all fittings laid in trenches/wall complete for protection UG cable when crossing the road of size 40 mm bore including taking down complete all as specified and as directed by Engr-in-Charge. MAKE: TAT/JINDAL/PRAKASH SURYA

Taking down old unservicable LT U/G cable of 35 Sqmm 4 core/50 sqmm 3.5 core complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth in hard/dense soil and getting out soil, complete all as specified and as directed by Engineer-in-charge.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed and as directed by Engineer-in-Charge.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and as directed by Engineer-in-Charge.

M&L for sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, including punning upto total 18 cm thick complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Only punned thickness of 18 cm will be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 250 mm x 150 mm x 40 mm

Supply and lay cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with standed aluminium conductor of following sizes 50 sqmm x 3.5 Core. Make : Cable corporation of India/Havells India Ltd/Universal Cables Ltd/ Polycab/RPG Cables/Gloster/KEI

Supply and lay cable XLPE Insulated screened PVC bedded galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with standed aluminium conductor of following sizes 35 sqmm x 4 Core. Make : Cable corporation of India/Havells India Ltd/Universal Cables Ltd/ Polycab/RPG Cables/Gloster/KEI

Supply, installation, commissioning and testing Polycarbonate CPRI approved OEM made main LT feeder pillarThe panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel should be anti-acid & anti corrosive. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of board/panel shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE OF DEGREE OF INGRESS PROTECTION IP65/IP54 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane. The manufacturer of board/panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate hermoplastic panel in accordance with IEC 60439-1. The CPRI report shall have mention of following tests performed and passed out satisfactorily: Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits, Clearance &mCreepage Distance, Mechanical Operation, For the assembly of Power switch gear and control gear assemblies (PSC) up to 630A in accordance with IEC 61439 Part1 & 2, The board manufacturer must submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS,SS will not be applicable. Each Board shall have individual routine test report of the manufacturer, Guarantee and warrantee certificates will be accepted only from original manufacturer. The panel should passed glow wire test 960oCin accordance with 60695-2-11 [flame retardant and self-extinguishing. Make- Hensel/Rittal/Emitter/Schneider.

Power Distribution Panel outdoor/floor mounting with accessories:- INCOMING incomer- (i) 200Amp 50KA MCCB FP-01No Outgoing - (i) 160Amp MCB TP-01No (ii) 100Amp MCCB TP-01No (iii) Digital Ammeter, Digital Voltmeter, LED indicators (RYB) (iv) Aluminium busbar 250Amp (v) On load changeover switch 200Amps

Supply, installation, testing and commissioning of ductable type standalone oil fired kerosene/HSD based hot air generator complete with stainless steel heat exchange chamber consisting of furnace fabricated out of high temperature resistance stainless steel, reflector, built in fuel oil piping exhaust chimeny all houssed in powder coated cashing suitable for operator on 50Hz single phase 230 Volt AC supply capacity 35000 Kcal/Hr. (a) Heat output - 35000 Kcal/Hr (b) Hot Air Temp - 40C (c) Temperatrue - 90C Max (d) Fuel consumption - 2.3 ltr/Hr (e) Thermal efficiency - 80-90% (f) Electric supply - 220 Volt 50 Hz (g) Tempertature control - Automatic (h) Fuel - Kerosene/Diesel (j) Burner - Riello/Ben-Tone Make : Top mind industries private limited/ECCO Flame/Flameco/Thermex

S&F and installation, ducting for hot air blower to room with complete 40 mm thick PUF (poly urethene foam) insulation having 40kg/Cum density.

S&F for Modular switch one way single pole 16 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6/16 A -2/3 Pin combined 2 module 240 Volt, Make : Anchor/Legrand/Crabtree/ABB

S&F metal flush box 3 module Make : Anchor/Legrand/Crabtree/ABB

S&F for modular white cover plate with frame 3 module. Make : Anchor/Legrand/Crabtree/ABB

H R CONSTRUCTION