SMART PERIODICAL SERVICES AND MISC WORKS FOR INTERNAL AND EXTERNAL SURFACES AT DALHOUSIE CANTT UNDER AGE(I) DALHOUSIE

M&L for Rendering 15 mm thick in two layers (10+5) on fair facesor other than fair faces of brick work, concrete sruface,stone masonary in cement mortar (1:6), finished even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by Engr-in-charge. Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account.all as specified and directed.

M&L for Rendering 15 mm thick in two layers (10+5) on other than fair faces of brick work,stone masonary surface, concrete surface in cement mortar (1:4), finished even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by engr-in-charge. Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises all as specified and directed by engr-in-charge. Note: Necessary additional dubbing if required will be done by contractor and necessary form work and scaffolding as required and nothing extra cost is admissible in this account.all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" /9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared painted surface of wall and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface Note: Where thickness of putty is required more than 1mm thick, the same shall be make good using POP and than putty shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account.

M & L for water based premium acrylic smooth exterior emulsion of approved colour with excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint over single coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of finishing coats complete all as specified and directed.

M&L applying two coats of oil emulsion distemper complete all as specified and directed.

M&L preparation of old decorated plastered or unplastered surfaces of walls including cornices, pilasters, etc. by washing, rubbing, stopping, brooming down with steel wire brushing scrapping down smoke soots, moulds efflorescent salts and trading oil and greasy spots & providing one coat of oil bound distemper on walls complete all as specified & directed

M&L preparation of old decorated plastered or unplastered surfaces of walls including cornices, pilasters, etc. by washing, rubbing, stopping, brooming down with steel wire brushing scrapping down smoke soots, moulds efflorescent salts and trading oil and greasy spots & providing one coat of cement bases paint on walls complete all as specified & directed

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.