Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹17.4 L+₹3.0 L (20.7%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹17.9 L+₹3.6 L (24.8%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹18.9 L+₹4.5 L (31.4%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹19.9 L+₹5.5 L (38.1%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
6 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN-913862 C/o 56 APO
Repair / cleaning of OH water tank and connecting items for various bldgs under AOR of AGE B/R Dett-B under GE 862 EWS
2023_MES_588657_1
GER-06/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
Class D a(i)
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹60,000
Yes
13 May 2023
8 Apr 2023
8 May 2023
8 Apr 2023
6 May 2023
22 Apr 2023
Amount
Disconnecting existing tanks exc 250 ltr and n exc 500 ltr, setting aside or lowering if required for repair, cleaning, etc and hoisting ,if required reconnecting and re- fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, complete all as specified and directed.
Disconnecting existing tanks exc 500 ltr and n exc 1000 ltr, setting aside or lowering if required for repairs, cleaning, etc and hoisting if required reconnecting and re- fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, complete all as specified and directed.
Disconnecting existing tanks exc 1000 ltr and n exc 2000 ltr, setting aside or lowering if required for repairs, cleaning, etc and hoisting if required reconnecting and re- fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, complete all as specified and directed.
M&L for writing of figures (Block, Roman, Italic or Indian) as (Tank No, Unit Name, Tank cleaned No : DD/MM/ YEAR) n exc 15 cm high of each tank , with synthetic enamel paint of any colour on any type of overhead water tank, complete all as specified and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, double layered, (cylindrical vertical with closed top), hoisted and fixed in position of capacity 500 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow pipe, nipple and including 20mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed in position, complete all as specifed in SSR Part-I and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, double layered, (cylindrical vertical with closed top), hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow pipe, nipple and including 20mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed in position ,complete all as specifed in SSR Part-I and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, double layered, (cylindrical vertical with closed top), hoisted and fixed in position of capacity 2000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow pipe, nipple and including 20mm bore ball brass valve with union (two nos each) screwed for iron pipe and fixed in position all as complete all as specifed in SSR Part-I and directed.
S&F in repair for 20 mm ball brass valves, high pressure PTMT, with epoxy coated aluminium rod & high density plastic ball complete, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15 mm bore ball brass valves, high pressure PTMT, with epoxy coated aluminium rod & high density plastic ball complete, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for plastic covers of any type (threaded or hinge and locking system) for rotaional moulded polyethylene water storage tanks of any capacity i.e 250 ltr to 3000 ltrs including fixing, complete all as specified and directed.
S&F in repair for 25mm dia brass tank nipple suitable for HDFE water tank (minimum weight 25mm - 65 gms) complete all as specified and directed.
S&F in repair for 20mm dia brass tank nipple suitable for HDFE water tank (minimum weight 25mm - 65 gms) complete all as specified and directed.
S&F in repair for 15mm dia brass tank nipple suitable for HDFE water tank (minimum weight 25mm - 65 gms) ,complete all as specified and directed.
Taking up or down GI steel tubing 15/20/25mm bore and connections including cleaning for refixing or removal ,complete all as specifed and directed.
M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specified and directed.
S&F for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors ,complete all as specified and directed.
S&F for 25 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors ,complete all as specified and directed.
Refixing old 15mm steel tubing and connection in new or old position(wall, ceiling, floors etc) complete all as specified and directed.
Refixing old 20mm steel tubing and connection in new or old position(wall, ceiling, floors etc) complete all as specified and directed.
Refixing old 25mm steel tubing and connection in new or old position(wall, ceiling, floors etc) complete all as specified and directed.
M&L in repair for gun metal / glove or gate valves with iron wheel head screwed both end for iron pipes of 15 mm internal bore, complete all as specified and directed.
M&L in repair for gun metal / glove or gate valves with iron wheel head screwed both end for iron pipes of 20 mm internal bore, complete all as specified and directed.
S&F in repair for stop valve, cast copper alloy, screwed for high pressure with crutch or butterfly handle, screwed suitable for 20mm bore iron pipe or for union both ends, complete all as specified and directed.
S&F in repair for stop valve, cast copper alloy, screwed for high pressure with crutch or butterfly handle, screwed suitable for 15mm bore iron pipe or for union both ends, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position including cutting the reinforcement as requried to facilitate, complete all as specified and directed.
M&L for formwork to side and soffits of floor or roof beams, beam hunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc to obtain fair finished surface, complete all as complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
M&L for reinforced cement concrete type B-1, 1:2:4, (20mm graded crushed stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.
M&L for brick work using old size bricks sub class 'B', straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls, pillars, cornices and applying two coats of cement base paint, complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , fixed to wall with & including clams, nuts bolts complete ,after dismantling of old unserviceble PVC pipe, complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
M&L for 40mm thick floor cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) in floors, finishing cement concrete surface even and smooth without using extra cement complete after demolation of old cement concrete, complete all as specified and directed.
Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing in low lying area where directed and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 2% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed.
M&L in repair for bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe, suitable for 15 mm bore, complete all as specified and directed.
S&F in repair for fancy type chromium plated angle valve, cast copper alloy, screwed for high pressure with crutch or butterfly handle, screwed suitable for 15mm bore iron pipe or for union both ends, complete all as specified and directed.
S&F in repair for 32mm dia waste coupling of brass chromium plated for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange and bedded in red lead cement mortar, complete all as specified and directed.
S&F in repair for 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms), complete all as specified and directed.
S&F in repair for grating doom 125mm dia of PTMT (Min Weight 40 gms) with waste hole, complete all as specified and directed.
S&F in repair for PVC connection 15 mm x 450 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.
S&F in repair for 450mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings, complete all as specified and directed.
S&F in repair for PVC waste pipe 32/40mm bore fixed to PTMT waste coupling for kitchen sink, complete all as specifed and directed.
S&F in repair for PVC seat cover black/white colour or any required colour suitable for one piece WCs including PVC hinges, complete all as specified and directed.
S&F in repair for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe, complete all as specified and as directed.
S&F in repair for vitreous China wash basin, white, flat back, size 550x 400mm including 15mm bore pillar tap cast copper alloy, PVC connection 15mm length 450mm, low density PVC waste pipe, complete all as specified and directed.
S&F in repair for 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F for in repair sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410mm x 330mmx 160mm, complete all as specified and directed.
S&F in repair for 15 mm bore brass CP wash hand basin mixer hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15mm bore brass CP sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated wall mixer fixed with shower rose and connecting to wall mixer, complete all as specified and directed.
S&F in repair for glass shelf 600mm long complete as specified and directed by Engr-in-Charge. Make : Jaquar / Hindware / Parryware.
S&F in repair for glass corner self, complete all as specified and directed by Engr-in-Charge. Make : Jaquar / Hindware / Parryware.
S&F in repair for hand shower (Health Faucet) with 1.2 meter long PVC tube & wall hock ,complete all as specified and directed by Engr-in-Charge. Make : Jaquar / Hindware / Parryware.
S&F in repair for copper alloy chromium plated jet spray 1.00m long stainless steel hose,complete all as specified and directed by Engr-in-Charge.Make : Jaquar / Hindware / Parryware.
Taking down chowkhats or frames (without taking off wind shutters from the frames) n.exc 1.5 Sqm each and removing to store, complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, including each door / shutter SS butt hinges 03 Nos, tower bolt 02 Nos and 150mm handle 02 Nos, mentioned in SSR Part-II 2020 complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 300x450x7 mm thick, (premium quality) in skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including rendering 10 mm thick backing layer of cement plaster in cement mortar 1:3 including dismantling old unserviceable coloured glazed tile, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling old unserviceable non skid coloured tiles complete all as specified and as directed.
Removing of bushes upto 10cm dia thick, grass from roof top, racking out joints / pointing to bricks tiles / RCC and flush pointing with cement mortar 1:3 with water proofing compound as per manufacturer's instructions, complete all as specified and as directed.
SATVIR GUPTA ENGINEER and CONTRACTOR
M/S RAHUL GUPTA
SUBASH CHANDER
NATIONAL TRADING COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .