COMPREHENSIVE REPAIR TO CERTAIN BLDGS OF 1 MED REGT, ASC, RODRIGUES ENCLAVE AT AGE AURANGABAD UNDER GE(S) AHMEDNAGAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismanlting floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

Dismantling of stone slabs, interlocking blocks of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.

Taking down cement plaster on brick/ stone/ concrete walls including raking out joints, hacking for key scrubbing down with water etc all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surfaces of walls in cement mortar (1:3) complete all as specified and as directed.

Taking down shutters of any description, area exc 1 sqm & n.exc 2 sqm each leaf complete all as specified & as directed.

Taking down aluminium frame and shutters of doors, windows & ventilators any type and any size all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and as directed

M&L for PCC 1:3:6, type C-1 using 20mm graded stone aggregate in roof kerbs/mud stops, rounded or chamfered on edge/bed blocks for hold fasts including necessary formwork complete all as specified and as directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed. Note : Reinforcement shall be measured and paid seperately.

M&L in repairs for precast cement concrete 1:2:4, type B-0, using 12.5mm graded stone aggregate as in louvers and jallies, 25mm thick (measured solid), including all mouldings, mild steel wire in reinforcement, set in cement mortar 1:4 all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in window or door cills, lintels, bressumers, steps, string courses, copings, kneelers, apex stones, pier caps, columns, posts, plastes, pintle blocks, anchorage blocks, corbels, brackets, etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match all as specified and as directed.

M&L for brickwork with old size, subclass ‘B’ bricks, straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:6, including demolition of brickwork or stone/boulder masonry complete all as specified and as directed.

M&L for second class hardwood, 35 mm thick, factory made, plain framed, panelled shutters (two panels) with panel of 9 mm thick BWP plywood bonded with high quality phenol-formal-dehyde synthetic resin adhesive, confirming to IS-710, the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & as directed.

S&F 35 mm thick, second class hard wood, glazed and and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed.

M&L for 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

S&F factory made, solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet, reinforced with mild steel square tube, suppling & fixing in opening as per specifications & drawing given in SSR 2009 Part I complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and as directed.

S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F 100 mm size mild steel butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.

S&F 75 mm size stainless steel butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.

S&F 300mm size, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F 150 mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repairs, Harrison curtain rails 20mm dia, mild steel, plastic coated, fancy type with and including end brackets, stops etc and fixed complete with screws including wooden or PVC rawal plug all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundaion box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed .

M&L for mild steel framed work such as grills, grating etc with end of bars shoulderd and/or riveted, welded or forged into spikes, framedguard bars, iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

M&L for rolled mild steel sections conforming to Fe-290 (Gde E-165) as in door chowkats/frames including cutting to required length, welding, etc, including hold fasts complete all as specified & as directed.

M&L for rolled mild steel as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections conforming to Fe 410-W (Gde-E250) quality A) including distance pieces, cleats etc. all as specified and as directed.

S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete without glazing bars, complete all as specified and as directed.

S&F anodised aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.

S&F anodised aluminium shutters with aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc and locking arrangement complete all as specified and as directed.

S&F laminated gypsum tile board 8mm thick with textured white colour PVC film on the face side and metalized polyster (MPL) film on rear side in ceiling as per manufacturers instructions of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, including dismantling existing false ceiling work of any description all as specified and as directed.

S&F 6mm thick, asbestos cement corrugated or semi corrugated sheets in roofs, walls etc, fixed with L or J type or cranked hook bolts all as specified and as directed.

S&F 6mm thick, asbestos cement, two piece, serrated ridge for corrugated or semi corrugated asbestos roof sheets, fixed with L or J type or cranked hook bolts all as specified and as directed.

S&F prepainted galvalume aluminium zinc coated galvanised iron based corrugated steel sheets, 0.5 mm thick of any colour having tensile strength 550 MPA as in roof covering or ridges, hips and straight flashing or in fixed with self taping screws (length & girth as fixed) complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheets, 0.5mm thick, with side lap and end lap of any colour having tensile strength 550 MPA as in ridges, hips, valley gutters, drip and straight flashing or in roof covering/cladding fixed with self taping screws (length & girth as fixed) complete all as specified and as directed.

Taking down existing roof treatment of any type and any thickness including mud in roofs, plastering, leeping plaster of any thickness cutting & uprooting trees /roots / vegetation growth & removing the debris from the site premises distance upto 1 km from the site and material and labour for providing and laying in situ water proofing treatment with APP (Atactic Polypropylene) polymer modified prefabricated membrane over roof with following procedure complete all as specified & as directed:- (a) Cleaning existing surface properly. (b) Providing and laying 10mm thick screed bed with cement mortar 1:3 in roof surface with and including WPC (liquid) as per manufacturer's instructions. (c) Applying a coat of bitumen primer @ 0.40 litre/sqm on prepared surface. (d) Laying water proofing roof membrane APP polymer modified prefabricated membrane using Butane torch by torch application with 100 mm side laps and 150 mm end lap. All overlap shall be firmly bonded with bitumen primer and levelled by heating the overlaps with Butane torch. Physical properties of APP membrane shall be as under :- (i) Membrane thickness - 3 mm (minimum) (ii) Membrane weight - 3.60 Kg/Sqm (minimum) (iii) Five layer reinforced with Non woven polyester weight not less than 150 Gm/Sqm. (e) Applying two coats of bituminous aluminium paint over APP membrane @ 0.11kg/sqm for each coat. Note : The cost of liquid WPC shall deemed to be included in the rate quoted.

M&L for cleaning existing surfaces properly with steel wire brushes by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick plain cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregate, finished even and smooth without using extra cement complete all a specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregates as in sub base of flooring complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4, type B0, using 12.5mm graded stone aggregates in subbase, finished even & rough to receive cement mortar bedding complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 53 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 55 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4.

M&L for precast cement concrete coloured chequered tiles with glossy finish of size 30cm x 30cm x 25mm thick, machine pressed with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and as directed.

M&L for light colour vitrified tiles, 8 to 9 mm thick (Square or rectangular), area of each tile exc 0.36 Sqm but n exc 0.42 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and a directed.

All as per serial item No 58 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4.

M&L for coloured double charged / ultracharged vitrified tiles, 9 to 10mm thick (Square or rectangular), area of each tile exc 0.42 Sqm but n exc 1.00 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and a directed.

All as per serial item No 60 above but in dado / skirting or on vertical surfaces, laid over and including 10mm thick backing coat in cement mortar 1:4.

M&L for glazed coloured ceramic tiles (shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 300mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing, mirror polishing and removing dust complete all as specified and as directed.

All as per serial item No. 63 above but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site over and including10 mm thick backing coat of cement mortar (1:4) complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver blocks any shape and any size confirming to IS-15658-2006 of rubber moulded, 60mm thick, M-35 grade with grey cement and pigment, laid over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for 12 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces of ceilings, finished even & smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of chalk whitining complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint (white or tinted) over one coat of primer all as specified and as directed.

M&L for complete removal of existing treatment on walls (any number of layers ) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with 1.50mm thick (Average) wall care putty and applying two coats of oil bound distemper, over a coat of primer complete all as specified and as directed

M&L for complete removal of existing treatment on walls (any number of layers ) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with 1.5 mm (average) thick wall care putty and applying two coats of cement base paint all as specified and as directed

M&L for complete removal of existing treatment of old plastered or unplastered or old wall surfaces, preparation of surfaces and applying two coats of exterior acryclic emulsion weather coat paint, white or tinted, over a coat of primer complete all as specified and as directed.

Hacking out of old broken glass (any thickness ,size quality or description) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F tinted glass, 4.8 mm thick as in glazing to aluminium door, window & partition including pad/gasket complete all as specified and as directed .

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for 15 mm bore GI tubing, medium grade with all fittings and fixed complete on walls and ceilings or concealed in wall or laid in floors etc complete all as specified and as directed.

Fixing only old steel tubing 15mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed. Note : Old serviceable steel tubing obtained from taking up/down shall be used.

M&L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings, or laid in floors etc complete all as specified and as directed.

Fixing only of old steel tubing 20mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed. Note : Old serviceable steel tubing obtained from taking up/down shall be used.

M&L for cleaning of water tanks, any type, exc 250 Ltrs but not exc 500 Ltrs capacity, including scrubbing with wire brushes to remove all scales, dirts, fungus etc, cleaning with bleaching powder, removing scales & dirts from mouths of circulating pipe etc & writing date of cleaning on tank with synthetic enamel paint complete all as specified and as directed.

M&L for cleaning of water tanks, any type, exc 500 Ltrs but not exc 1000 Ltrs capacity, including scrubbing with wire brushes to remove all scales, dirts, fungus etc, cleaning with bleaching powder, removing scales & dirts from mouths of circulating pipe etc & writing date of cleaning on tank with synthetic enamel paint complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank coplete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 2000 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank complete all as specified and as directed.

S&F in repairs, 20mm dia ball valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

S&F in repairs, bib tap, 15mm dia, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, stop valve, 20mm dia, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, 15mm bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm bore, brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and as directed

S&F in repairs, PVC connections 15 mm dia, 450mm long with PTMT nuts all as specified and as directed.

S&F in repairs, grating doom, round 140 mm size of PTMT (Minimum weight 50 gms) all as specified and as directed.

S&F in repairs, brass chromium plated shower rose, 125mm size with long arm all as specified and as directed.

S&F in repairs, 110mm dia, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls or laid to floors all as specified and as directed.

S&F in repairs, 110mm dia PVC (SWR) bends any radius all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, P or S trap, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet (pedestal pattern), white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set, with and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, PVC low level flushing cistern 10 litres capacity, white, with all fittings and fixtures including brackets and 32 mm bore PVC flush pipe, all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm with and including brackets, pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basin with long screwed shanks and fly nuts and PVC waste pipe,15mm dia, 450mm long PVC connection pipe complete all as specified and as directed.

M&L in repairs, viterous China urinals, half stall (back to corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, brass chromium plated urinal spreader, flush pipe, grating and union for discharge pipe and 32mm dia PVC waste pipe all as specified and as directed.

S&F in repairs, 32 mm dia, standard PVC waste pipe for WHB all as specified and as directed.

S&F in repairs, 40 mm dia, standard PVC waste pipe for sink all as specified and as directed.

S&F in repairs, plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and as directed.

S&F in repairs, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

M&L for special treatment to sunken portion with 10 mm thick rendering in cement mortar 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick in cement mortar 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling, floor area of WC/bath upto 3.0 Sqm etc. complete all as specified and directed. Note :- The quoted rates shall include for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimum 3 Kg/Sqm complete all as specified and as directed

S&F in repairs, 75 mm dia PVC(SWR) nahani/floor trap with grating including jointing to waste pipe with solvent cement complete all as specified and as directed.

S&F in repairs, 75 mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

S&F in repairs, 75 mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

S&F in repairs, seat cover for WC (Anglo indian type WC) in white colour and fixed with mild steel chromium plated aluminium hinging device fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including down take pipe and chromium plated coupling and fixed complete all as specified and directed.

S&F in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including down take pipe and chromium plated coupling complete all as specified and directed.

S&F Aluminium anodised three track sliding window with 100 x 44mm frame including 4.5mm tinted or plain glass in two shutters and stainless steel mesh in one sut fixed with rubber gasket with aluminium beading clips, frame with and including duco pattern grill of size 75mmx75mm fixed with aluminium beading 0.7mm thick, making good to wall surfaces to match with existing surface complete all as specified and directed.

S&F factory made UPVC any colour sliding window, three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: (a) Glass sheet shall be measured and paid seperately under respective item. (b) Unit rate quoted shall include all connected accessories. (c) Net Opening shall be measured for payment purpose.

M&L for 18 to 20mm thick granite (of any type) table rubbed and polished any colour as in steps, jambs, pillars, windows cill, cooking platform and like in one piece laid over and inlcluding 10mm thick backing coat of cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

Rounding the edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M&L for machine cut kudappah stone slabs, 20-25 mm thick, laid over and including 20 mm thick bedding layer in cement mortar 1:6 including roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab includig cutting, rubbing and finish polishing complete all as specified and as directed.

M/S. M.A. Sharief engineers and contractors

D V Engineers and Contractors Pvt Ltd

sonu enterprises

M/s S.R lahoti

B.R.ANAND

sunil kaduba dakale

ASHWAMEDH ENGINEERS