Special repairs to bldg- No -P-94, of field wksp, T-90 of ASC and sewage line of Med Regt at Mil Stn Aurangabad under GE (S) Ahmednagar

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15cm thick all as specified and as directed.

Dismantling framed steel trusses n exc 10m span complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame), area n exc 1.5 sqm each all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame), area exc 1.5 sqm but not exc 4 sqm each all as specified and as directed.

Dismantling of AC sheets (corrugated, semicorrugated etc) as in roof covering including ridges all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above ground level) all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

Demolition and breaking of drain pipes (SGSW, AC or RCC) 200mm internal dia, set in cement mortar all as specified and as directed

Demolition and breaking of drain pipes (SGSW, AC or RCC) 300mm internal dia, set in cement mortar all as specified and as directed

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil all as specified and as directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil all as specified and as directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ disintigrated rock all as specified and as directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers n exc 25cm thick all as specified and as directed

Removing excavated soil to distance n exc 50m and depositing where directed at a level n exc 1.50m above the starting point all as specified and as directed.

Removing excavated rock to distance n exc 50m and depositing where directed at a level n exc 1.50m above the starting point all as specified and as directed.

M&L for plain cement concrete, 1:3:6, type C1 (using 20 mm graded stone aggregates) as in roof kerbs or mud stops, rounded or camfered on edge all as specified and as directed.

M&L for plain cement concrete, 1:2:4, type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.50m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, water throughs and the like including necessary formwork and weatering, slightly rounded or chamfered angles and throating all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes of 200mm internal dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in concrete bed to drain pipes of 300mm internal dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, and similar articles including moulds, forms etc, set in cement mortar 1:4 all as specified and as directed. Note : Reinforcement will be measured and paid separately.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 all as specified and as directed.

S&F in repairs, galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel staples/ screws to wooden/steel frames all as specified and as directed.

S&F mild steel screw bolts, machine made, 12mm to 16mm dia with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10cm long all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

S&F mild steel framed work conforing to Fe 290 Gde E-165, as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing all as specified and as directed.

S&F steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded all as specified and as directed.

S&F mild steel framed work conforing to Fe 290 Gde E-165, such as grills, gratings etc with ends of bars shouldered and /or rivetted or forged into spikes, framed guard bars for guard bars, barred iron doors ladders and smilar work all as specified and as directed.

S&F roof trusses (framed), trussed purlins, crane gantries, rail and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-250) quality-A all as specified and as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates, conforming to Fe 410-W (Gde-250) quality-A all as specified and as directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with rivetted, bolted or welded attachment, conforming to Fe 410-W (Gde-250) quality-A all as specified and as directed.

S&F rolled mild steel sections conforming to Fe 410-W (Gde-250) quality-A, as in wind ties for roof including all necessary drilling, bolting or riveting etc and similar work all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550 Mpa as in roof covering/ ridges/ valley gutters/ cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for 2mm thick fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 40mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in floor, finished even and smooth without using extra cement all as specified and as directed.

M&L for 20-25 mm thick machine cut kota stone flooring (size of kota stone slab not less than 22"x22") laid over and including 20 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry and grouted/pointed in white cement mixed with pigments to match the shade of slab including cutting, rubbing and mirror finish polishing complete all as specified and as directed.

M&L for 18-20mm thick machine cut kota stone on vertical surfaces such as skirting/dado over and including 10 mm thick backing coat in cement mortar 1:4, laid and jointed with grey cement slurry, and grouted/pointed in white cement mixed with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement all as specified and as directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement all as specified and as directed.

S&F wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joist, etc in walls, ceilings, stanchions, beams, etc including all laps, cutting and waste all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer all as specified and as directed.

S&F 3 mm thick plain sheet glass, ordinary quality including glazing with oil putty, in squares n exc 0.5sqm in each pane all as specified and as directed.

M&L for preparation of new steel surfaces of any description exc 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for reinforced concrete pipes, 200mm internal dia, class NP-2, laid and jointed with collars complete all as specified and as directed.

M&L for reinforced concrete pipes, 300mm internal dia, class NP-2, laid and jointed with collars complete all as specified and as directed.

M&L extra for forming fair finished drain or channel, 30cm inner girth in cement concrete using extra cement and forms all as specified and as directed

M&L for forming construction (Dummy) joints, 65mm deep x 10mm wide, filled with sealing compound grade 'A' all as specified and as directed

Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding light fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multi-stranded copper conductor cable of 1100 Volts grade, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multi-stranded), PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire at other end including PVC folding boards for mounting switches, sockets for one light point controlled by one way switch all as specified and as directed. NOTE: 1.Proper colour coding shall be adoptd for wiring (for phase-RED,YELLOW,BLUE & for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holdrs,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

S&F modular switch piano, flush type, 5 Amp, single pole, one way, 230 volts, white or ivory finish all as specified & as directed.

S&F 1100 volts grade, heavy duty cable PVC insulated, aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connetion suspended by insulating hangers not more than 1m apart including 4mm dia GI suspension wire, one flat or circular stranded conductor of size 10sqmm, 2 core including taking down existing service cable & GI suspension wire complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made), double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts, 6 way, protection class IP-42, suitable for fixing MCBs,Isolators etc,confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 200 Amps rated copper busbar,with Neutral bar,Earthbar and cable lies for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed.

S&F in repairs, MCB SPN, 40 to 63 Amps, 240 volts, 10KA 'C' curve, in the MCB DB complete with making connection, testing and commissioning complete all as specified and as directed.

S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity, 'B' curve, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F LED street light fitting 35 Watt, 230 V AC outdoor type, with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics, including brackets made out of 40mm bore GI pipe, medium grade, 1.20 mtr long, bend to shape and including suitable MS clamps made out of 40 x 6mm flat iron, necessary bolts, nuts, washers etc complete and painting the bracket and clamps with 2 coats of synthetic enamel paint over a coat of red oxide Zinc chromate primer including taking down existing street light fitting with bracket complete with IP 65/66 protection complete.

M&L in repairs/replacement for earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

M/s.M G Kulkarni

sonu enterprises

M/s S.R lahoti

M/S. M.A. Sharief engineers and contractors

R. T. Saluji

D V Engineers and Contractors Pvt Ltd