Major repairing and servicing of VT pump, supply of spare parts of VT pump, HT panel and switchyard at PS I to PS IV of KSL Lift for the year 2025-26

Repairing of suction bell with insertion of existing type shell/bush with cutless neoprene rubber bearing as per existing size and shape with proper locking arrangement and Cap ,repairing of Oval holes of flange, repairing of flange, Welding work, Machining, sanding by sand paper, grinding, painting inside and outside with applying inner coat of zinc chromate red oxide primer and than outer coat of synthetic black enamel paint 2/2.1/2.12/2.15/2.45 cumec pump at Rajiasar PS I

Providing and fixing of Flange set of VT Pump assembly including of Design, drawing, fabrication, transportation- supply , fixing as per existing elbow- delivery pipe and civil structure, erection, testing, painting with applying two coat of zinc chromate red oxide primer and three coat of synthetic black enamel paint and complete commissioning all scope of works as per specification with removing of old set. At Malkisar PS-II

Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut (chuck nut), dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter At Malkisar PS-II

Providing and fixing of Thrust bearing housing for vertical wet well type pump with all accessories like oil retainer sleeve, retaining washer, adjusting nut(chuck nut) ,dial type temp. indicator, mounting cover, oil fill port with plug, oil level sight window assy as per existing design of pump including work of Decoupling of motor, removing of motor from stool, removing of coupling and bearing hub assembly, fitting of new Thrust bearing housing , recoupling and fitting of motor on stool, testing and trial of pump, work shall be carried out as per pre approved design drawings. 1.2 to 2.15 cumec pump of static head 4 to 8 meter At Malkisar PS-II

Bearing 29318 E1

Bearing 29322 E1

Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth , rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge . (Glazing and paneling to be paid for separately). For fixed portion Anodised aluminum (anodized transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) At Malkisar PS-II

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) At Malkisar PS-II

Providing and Fixing of IK08, IP 66 protected 150 Watt High Power LED Flood Light with single piece Pressure die cast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles.BIS certified and Trade mark certified.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. Make- Bajaj/Philips/Crompton At Malkisar PS-II

Repairing of Discharge Bowl of VT Pump with insertion of existing type shell/bush with cutless neoprene rubber bearing as per existing size and shape with proper locking arrangement and Cap ,repairing of Oval holes of flange, repairing of flange, Welding work, Machining, sanding by sand paper, grinding, painting with applying inner coat of zinc chromate red oxide primer and than outer coat of synthetic black enamel paint 2/2.1/2.12/2.15/2.45 cumec pump At Rajiasar PS-I

Providing and fixing of casing liner for impeller casing /propeller casing of material SS-410 in existing casing. 1.2 to 2.15 cumec pump of static head 4 to 8 meter At Rajiasar PS-I

Supply of muff coupler including thrust collar halfs, Coupler cap, key, Allen HEAD CAP screws etc as per existing design material SS 411 Inner Diameter 71-85 mm At Rajiasar PS-I

Providing and fixing of Flange set of VT Pump assembly including of Design, drawing, fabrication, transportation- supply , fixing as per existing elbow- delivery pipe and civil structure, erection, testing, painting with applying two coat of zinc chromate red oxide primer and three coat of synthetic black enamel paint and complete commissioning all scope of works as per specification with removing of old set. At Rajiasar PS-I

Repairing of suction bell with insertion of existing type shell/bush with cutless neoprene rubber bearing as per existing size and shape with proper locking arrangement and Cap ,repairing of Oval holes of flange, repairing of flange, Welding work, Machining, sanding by sand paper, grinding, painting inside and outside with applying inner coat of zinc chromate red oxide primer and than outer coat of synthetic black enamel paint 2.81/3.14/3.75 cumec pump At Malkisar PS-II

Repairing of Discharge Bowl of VT Pump with insertion of existing type shell/bush with cutless neoprene rubber bearing as per existing size and shape with proper locking arrangement and Cap ,repairing of Oval holes of flange, repairing of flange, Welding work, Machining, sanding by sand paper, grinding, painting with applying inner coat of zinc chromate red oxide primer and than outer coat of synthetic black enamel paint 2.81/3.14/3.75 cumec pump At Malkisar PS-II

Providing and fixing of casing liner for impeller casing /propeller casing of material SS-410 in existing casing. 2.45/2.81/3.14 cumec pump of static head 4 to 8 meter At Malkisar PS-II

Supply of muff coupler including thrust collar halfs, Coupler cap, key, Allen HEAD CAP screws etc as per existing design material SS 411 Inner Diameter 71-85 mm At Malkisar PS-II