REPAIR/MAINT OF JOINERIES, FLOORING AND PLUMBING WORKS TO CERTAIN RESIDENTIAL BLDGS IN CDA COMPLEX UNDER GE GUWAHATI

Amount

Demolition of Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed.

M&L Cement Concrete1:3:6 Type C-2(using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and smooth without using extra cement complete all as specified and as directed.

Taking down 15mm bore steel tubing and connections, complete all as directed

Taking down 20mm bore steel tubing and connections, complete all as directed

S&F 15mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm bore GI pipe medium grade water tube with all fittings laid in floors fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F in repair, 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium windows/ventilators shutters, any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Dismantling/taking out existing unserviceable aluminum doos/windows/ventlitors including frame, hardware fittings, glass, wire guage, grills, etc from existing position complete all as directed

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

Supply only 4.8mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

M&L preparing old surfaces of walls by bromming, scrapping down smoke soot, moulds, moss, and treating oily and greasy spots, washing rubbing, down stopping distempered surfaces and applying two coats of oil bound distemper complete all as specified and as directed.

M&L preparing old surfaces of walls and applying one coats of oil bound distemper complete all as specified and as directed.

M&L preparing old surfaces of walls by bromming, scrapping down smoke soot, moulds, moss, and treating oily and greasy spots, washing rubbing, down stopping distempered surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L preparing old surfaces of walls and applying one coat cement base paint complete all as specified and as directed.

M&L preparing old surfaces of ceilings and applying one coat of white wash complete all as specified and as directed.

M&L preperation of old wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats syntheic enamel paint complete all as specified and as directed.

M&L preperation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coats syntheic enamel paint complete all as specified and as directed.

S&F in repair, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair, 15mm bore bib taps, cast copper alloy chromimum plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed..

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and as directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 200 mm size complete all as specified and as directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 300 mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium ally fixed complete all as specified and as directed.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

M&L preparing new surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L preparing new surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Taking out floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including and over 10mm thick cement screed bed or bedding layer in cement mortat 1:4 complete all as specified and as directed.

M&L Virified Ceramic tiles, dark shade, double charged/ultra charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15mm thick cement screed bed or bedding layer in cement mortat 1:6 complete all as specified and as directed.

M&L Virified Ceramic tiles, dark shade, double charged/ultra charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting/dado/ vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 10mm thick cement screed bed or bedding layer in cement mortat 1:4 complete all as specified and as directed.

M&L for 18-20 mm thick Pre polished machine cut Kota stone slab in single piece as in risers, skirting, dado etc including moulding/rounding tthe edges of the slab, over and including 15mm thick backing layer in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

M&L for 18-20 mm thick Pre polished machine cut Kota stone slab in single piece as in treads (including making 3 parallel grooves on kota stone Treads), including moulding/rounding tthe edges of the slab, over and including 20mm thick backing layer in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

M&L for 18-20 mm thick machine cut Kota stone slab as in flooring over and including 20 mm thick screed bed in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and complete all as specified and as directed.

M&L Prepolished Coloured Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, with grey cement and pigment including 15mm thick cement screed bed in cememt mortar 1:6 complete all as specified and as directed.

S&F in repair, decorative stainless steel curtain rod of 20mm dia thickness not less than 0.75mm, fixed with curtain rod holder fixed in walls with screws and finials caps with 6 Nos of curtain ring per RM complete all as specified and directed. Note: Curtain rod holder and finials caps will be measured and paid seperately at Supply only rates)

Supply only decorative stainless steel curtain holding braket suitable for holiding 20mm curtain rod heavy duty complete all as specified and directed.

Supply only decorative decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply only 3mm thick plain Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F in repair Stop cock 15mm of chromium plated with long shank and cup (concealed type) screw down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore angle cock, brass chromium plated, fancy type with flange complete all as specified and direcrted.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle, PVC flush pipe, complete all as specified and as directed.

Fixing only in repair, flushing cistern and flush pipe of any capacity or type complete all as specified and as directed.

Fixing only in repair, Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S&F in repair, 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M/S MANOJ PAUL

M/s L A Enterprise

M/S NRI INFRASTRUCTURES

M/S M Ahmed and Co.

M.G. ENTERPRISE